scholarly journals Very high cycle fatigue strength and crack growth of thin steel sheets

2016 ◽  
Vol 10 (36) ◽  
pp. 112-118 ◽  
Author(s):  
Mohand Ouarabi ◽  
Ruben Perez Mora ◽  
Claude Bathias ◽  
Thierry Palin-Luc
Keyword(s):  
Fatigue Strength ◽  
Crack Growth ◽  
High Cycle Fatigue ◽  
Cycle Fatigue ◽  
Steel Sheets ◽  
Very High Cycle Fatigue ◽  
Thin Steel ◽  
Very High

scholarly journals Properties of the Fine Granular Area and Postulated Models for Its Formation during Very High Cycle Fatigue—A Review

2020 ◽  
Vol 10 (23) ◽  
pp. 8475
Author(s):  
Jan Patrick Sippel ◽  
Eberhard Kerscher
Keyword(s):  
Fatigue Strength ◽  
Crack Initiation ◽  
Crack Growth ◽  
High Performance ◽  
High Cycle Fatigue ◽  
The Other ◽  
Cycle Fatigue ◽  
Very High Cycle Fatigue ◽  
Open Questions ◽  
Very High

Understanding the mechanisms leading to very high cycle fatigue is necessary to make predictions about the behavior under various conditions and to ensure safe design over the whole lifetime of high-performance components. It is further vital for the development of possible measures to increase the very high cycle fatigue strength. This review therefore intends to give an overview of the properties of the fine granular area that have been observed so far. Furthermore, the existing models to describe the early crack initiation and crack growth within the very high cycle fatigue regime are outlined and the models are evaluated on the basis of the identified fine granular area properties. The aim is to provide an overview of the models that can already be considered refuted and to specify the respective open questions regarding the other individual models.

scholarly journals On the determination of the bending fatigue strength in and above the very high cycle fatigue regime of shot-peened gears

2021 ◽  
Author(s):  
D. Fuchs ◽  
S. Schurer ◽  
T. Tobie ◽  
K. Stahl
Keyword(s):  
Fatigue Strength ◽  
High Cycle Fatigue ◽  
Load Carrying Capacity ◽  
Cycle Fatigue ◽  
Bending Fatigue ◽  
Very High Cycle Fatigue ◽  
Bending Load ◽  
Load Carrying ◽  
Bending Fatigue Strength ◽  
Very High

AbstractDemands on modern gearboxes are constantly increasing, for example to comply with lightweight design goals or new CO2 thresholds. Normally, to increase performance requires making gearboxes and powertrains more robust. However, this increases the weight of a standard gearbox. The two trends therefore seem contradictory. To satisfy both of these goals, gears in gearboxes can be shot-peened to introduce high compressive residual stresses and improve their bending fatigue strength. To determine a gear’s tooth root bending fatigue strength, experiments are conducted up to a defined number of load cycles in the high cycle fatigue range. However, investigations of shot-peened gears have revealed tooth root fracture damage initiated at non-metallic inclusions in and above the very high cycle fatigue range. This means that a further reduction in bending load carrying capacity has to be expected at higher load cycles, something which is not covered under current standard testing conditions. The question is whether there is a significant decrease in the bending load carrying capacity and, also, if pulsating tests conducted at higher load cycles—or even tests on the FZG back-to-back test rig—are necessary to determine a proper endurance fatigue limit for shot-peened gears. This paper examines these questions.

The Effects of Specimen Size on the Very High Cycle Fatigue Properties of FV520B-I

2015 ◽  
Author(s):  
Ming Zhang ◽  
Weiqiang Wang ◽  
Aiju Li
Keyword(s):  
Fatigue Life ◽  
Fatigue Strength ◽  
High Cycle Fatigue ◽  
Specimen Size ◽  
Fatigue Properties ◽  
Test Results ◽  
Cycle Fatigue ◽  
Very High Cycle Fatigue ◽  
Heat Effects ◽  
Very High

The authors researched the effects of specimen size on the very high cycle fatigue properties of FV520B-I through ultrasonic fatigue testing. The test results showed that the very high cycle fatigue mechanism was not changed and the fatigue properties declined as the specimen size increased. The S-N curve moved downward and the fatigue life decreased under the same stress level maybe due to the heat effects of large specimens in tests. The fatigue strength and the fatigue life were predicted by relevant models. The prediction of fatigue strength was close to test result, and the prediction of fatigue life was less effective compared with the previous prediction of small size specimen test results.

scholarly journals The influence of hydrogen on the very high cycle fatigue property and crack growth characteristics of bearing steels

2018 ◽  
Vol 4 (0) ◽  
pp. 18-00134-18-00134
Author(s):  
Takeshi OGAWA ◽  
Shota HASUNUMA ◽  
Yosuke INATOMI ◽  
Natsumi YASUKOCHI ◽  
Shohei SHIGETA
Keyword(s):  
Crack Growth ◽  
High Cycle Fatigue ◽  
Fatigue Property ◽  
Growth Characteristics ◽  
Cycle Fatigue ◽  
Bearing Steels ◽  
Very High Cycle Fatigue ◽  
Very High
Sign in / Sign up

Export Citation Format

Share Document