scholarly journals Flow Visualization of Unsteady Flow in an Axial-Flow Turbine Rotor with LDV

2004 ◽  
Vol 24 (Supplement2) ◽  
pp. 65-68
Author(s):  
Takayuki MATSUNUMA
Keyword(s):  
Unsteady Flow ◽  
Flow Visualization ◽  
Axial Flow ◽  
Turbine Rotor

scholarly journals Unsteady Flow Field Due to Nozzle Wake Interaction With the Rotor in an Axial Flow Turbine: Part II—Rotor Exit Flow Field

1997 ◽  
Vol 119 (2) ◽  
pp. 214-224 ◽  
Author(s):  
M. A. Zaccaria ◽  
B. Lakshminarayana
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Velocity Component ◽  
Axial Flow ◽  
Turbine Rotor ◽  
Edge Region ◽  
Trailing Edge ◽  
Rotor Wake ◽  
Cross Correlations ◽  
Far Wake

The two-dimensional steady and unsteady flow field at midspan in a turbine rotor has been investigated experimentally using an LDV with an emphasis on the interaction of the nozzle wake with the rotor flow field. The velocity measurements are decomposed into a time-averaged velocity, a periodic velocity component, and an unresolved velocity component. The results in the rotor passage were presented in Part I. The flow field downstream of the rotor is presented in this paper. The rotor wake profiles and their decay characteristics were analyzed. Correlations are presented that match the decay of the various wake properties. The rotor wake velocity defect decays rapidly in the trailing edge region, becoming less rapid in the near and far wake regions. The rotor wake semi-wake width increases rapidly in the trailing edge region and then grows more gradually in the near and far wake regions. The decay of the maximum unresolved unsteadiness and maximum unresolved velocity cross correlations is very rapid in the trailing edge region and this trend slows in the far wake region. In the trailing edge region, the maximum periodic velocity correlations are much larger than the maximum unresolved velocity correlations. But the periodic velocity correlations decay much faster than the unresolved velocity correlations. The interactions of the nozzle and rotor wakes are also studied. While the interaction of the nozzle wake with the rotor wake does not influence the decay rate of the various wake properties, it does change the magnitude of the properties. These and other results are presented in this paper.

scholarly journals Unsteady Flow Field due to Nozzle Wake Interaction With the Rotor in an Axial Flow Turbine: Part I — Rotor Passage Flow Field

1995 ◽  
Author(s):  
Michael A. Zaccaria ◽  
Budugur Lakshminarayana
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Axial Flow ◽  
Leading Edge ◽  
Turbine Rotor ◽  
Suction Surface ◽  
Pressure Surface ◽  
Aerodynamic Interaction ◽  
Flow Gradients ◽  
Rotor Flow

The flow field in turbine rotor passages is complex with unsteadiness caused by the aerodynamic interaction of the nozzle and rotor flow fields. The two-dimensional steady and unsteady flow field at midspan in an axial flow turbine rotor has been investigated experimentally using an LDV with emphasis on the interaction of the nozzle wake with the rotor flow field. The flow field in the rotor passage is presented in Part I, while the flow field downstream of the rotor is presented in Part II. Measurements were acquired at 37 axial locations from just upstream of the rotor to one chord downstream of the rotor. The time average flow field and the unsteadiness caused by the wake has been captured. As the nozzle wake travels through the rotor flow field, the nozzle wake becomes distorted with the region of the nozzle wake near the rotor suction surface moving faster than the region near the rotor pressure surface, resulting in a highly distorted wake. The wake is found to be spread out along the rotor pressure surface, as it convects downstream of midchord. The magnitude of the nozzle wake velocity defect grows until close to midchord, after which it decreases. High values of unresolved unsteadiness were observed at the rotor leading edge. This is due to the large flow gradients near the leading edge and the interaction of the nozzle wake with the rotor leading edge. High values of unresolved unsteadiness were also observed near the rotor pressure surface. This increase in unresolved unsteadiness is caused by the interaction of the nozzle wake with the flow near the rotor pressure surface.

Unsteady Flow Field of an Axial-Flow Turbine Rotor at a Low Reynolds Number

2006 ◽  
Author(s):  
Takayuki Matsunuma
Keyword(s):  
Reynolds Number ◽  
Flow Field ◽  
Unsteady Flow ◽  
Low Reynolds Number ◽  
Axial Flow ◽  
Turbine Rotor ◽  
Frame Of Reference ◽  
Flow Angle ◽  
Low Reynolds ◽  
Secondary Vortices

The unsteady flow field of an annular turbine rotor was investigated experimentally using a laser Doppler velocimetry (LDV) system. Detailed measurements of the time-averaged and time-resolved distributions of the velocity, flow angle, and turbulence intensity, etc. were carried out at a very low Reynolds number condition, Reout = 3.5 × 104. The data obtained were analyzed from the viewpoints of both an absolute (stationary) frame of reference and a relative (rotating) frame of reference. The effect of the turbine nozzle wake and secondary vortices on the flow field inside the rotor passage was clearly captured. It was found that the nozzle wake and secondary vortices are suddenly distorted at the rotor inlet, because of the rotating potential field of the rotor. The nozzle flow (wake and passage vortices) and the rotor flow (boundary layer, wake, tip leakage vortex, and passage vortices) interact intensively inside the rotor passage.

scholarly journals Unsteady Flow Field Due to Nozzle Wake Interaction With the Rotor in an Axial Flow Turbine: Part I—Rotor Passage Flow Field

1997 ◽  
Vol 119 (2) ◽  
pp. 201-213 ◽  
Author(s):  
M. A. Zaccaria ◽  
B. Lakshminarayana
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Axial Flow ◽  
Leading Edge ◽  
Turbine Rotor ◽  
Suction Surface ◽  
Pressure Surface ◽  
Aerodynamic Interaction ◽  
Flow Gradients ◽  
Rotor Flow

The flow field in turbine rotor passages is complex with unsteadiness caused by the aerodynamic interaction of the nozzle and rotor flow fields. The two-dimensional steady and unsteady flow field at midspan in an axial flow turbine rotor has been investigated experimentally using an LDV with emphasis on the interaction of the nozzle wake with the rotor flow field. The flow field in the rotor passage is presented in Part I. while the flow field downstream of the rotor is presented in Part II. Measurements were acquired at 37 axial locations from just upstream of the rotor to one chord downstream of the rotor. The time-averaged flow field and the unsteadiness caused by the wake have been captured. As the nozzle wake travels through the rotor flow field, the nozzle wake becomes distorted with the region of the nozzle wake near the rotor suction surface moving faster than the region near the rotor pressure surface, resulting in a highly distorted wake. The wake is found to be spread out along the rotor pressure surface, as it convects downstream of midchord. The magnitude of the nozzle wake velocity defect grows until close to midchord, after which it decreases. High values of unresolved unsteadiness were observed at the rotor leading edge. This is due to the large flow gradients near the leading edge and the interaction of the nozzle wake with the rotor leading edge. High values of unresolved unsteadiness were also observed near the rotor pressure surface. This increase in unresolved unsteadiness is caused by the interaction of the nozzle wake with the flow near the rotor pressure surface.

Unsteady Flow Field of an Axial-Flow Turbine Rotor at a Low Reynolds Number

2006 ◽  
Vol 129 (2) ◽  
pp. 360-371 ◽  
Author(s):  
Takayuki Matsunuma
Keyword(s):  
Reynolds Number ◽  
Flow Field ◽  
Unsteady Flow ◽  
Low Reynolds Number ◽  
Axial Flow ◽  
Turbine Rotor ◽  
Frame Of Reference ◽  
Flow Angle ◽  
Low Reynolds ◽  
Secondary Vortices

The unsteady flow field of an annular turbine rotor was investigated experimentally using a laser Doppler velocimetry (LDV) system. Detailed measurements of the time-averaged and time-resolved distributions of the velocity, flow angle, turbulence intensity, etc., were carried out at a very low Reynolds number condition, Reout=3.5×104. The data obtained were analyzed from the viewpoints of both an absolute (stationary) frame of reference and a relative (rotating) frame of reference. The effect of the turbine nozzle wake and secondary vortices on the flow field inside the rotor passage was clearly captured. It was found that the nozzle wake and secondary vortices are suddenly distorted at the rotor inlet, because of the rotating potential field of the rotor. The nozzle flow (wake and passage vortices) and the rotor flow (boundary layer, wake, tip leakage vortex, and passage vortices) interact intensively inside the rotor passage.

scholarly journals Unsteady Flow Field due to Nozzle Wake Interaction With the Rotor in an Axial Flow Turbine: Part II — Rotor Exit Flow Field

1995 ◽  
Author(s):  
Michael A. Zaccaria ◽  
Budugur Lakshminarayana
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Velocity Component ◽  
Axial Flow ◽  
Turbine Rotor ◽  
Edge Region ◽  
Trailing Edge ◽  
Rotor Wake ◽  
Cross Correlations ◽  
Far Wake

The two-dimensional steady and unsteady flow field at midspan in a turbine rotor has been investigated experimentally using an LDV with an emphasis on the interaction of the nozzle wake with the rotor flow field. The velocity measurements are decomposed into a time-averaged velocity, a periodic velocity component and an unresolved velocity component. The results in the rotor passage were presented in Part I. The flow field downstream of the rotor is presented in this paper. The rotor wake profiles and their decay characteristics were analyzed. Correlations are presented which match the decay of the various wake properties. The rotor wake velocity defect decays rapidly in the trailing edge region, becoming less rapid in the near and far wake regions. The rotor wake semi-wake width increases rapidly in the trailing edge region and then grows more gradually in the near and far wake regions. The decay of the maximum unresolved unsteadiness and maximum unresolved velocity cross correlations are very rapid in the trailing edge region and this trend slows in the far wake region. In the trailing edge region, the maximum periodic velocity correlations are much larger than the maximum unresolved velocity correlations. But the periodic velocity correlations decay much faster than the unresolved velocity correlations. The interaction of the nozzle and rotor wakes are also studied. While the interaction of the nozzle wake with the rotor wake does not influence the decay rate of the various wake properties, it does change the magnitude of the properties. These and other results will be presented in this paper.

Influence of Leading Edge Fillet and Nonaxisymmetric Contoured Endwall on Turbine NGV Exit Flow Structure and Interactions With the Rim Seal Flow

2013 ◽  
Author(s):  
Özhan H. Turgut ◽  
Cengiz Camcı
Keyword(s):  
Flow Structure ◽  
Total Pressure ◽  
Guide Vane ◽  
Axial Flow ◽  
Leading Edge ◽  
Turbine Rotor ◽  
Rotor Blades ◽  
Constant Thickness ◽  
Computational Evaluation ◽  
Nozzle Guide

Three different ways are employed in the present paper to reduce the secondary flow related total pressure loss. These are nonaxisymmetric endwall contouring, leading edge (LE) fillet, and the combination of these two approaches. Experimental investigation and computational simulations are applied for the performance assessments. The experiments are carried out in the Axial Flow Turbine Research Facility (AFTRF) having a diameter of 91.66cm. The NGV exit flow structure was examined under the influence of a 29 bladed high pressure turbine rotor assembly operating at 1300 rpm. For the experimental measurement comparison, a reference Flat Insert endwall is installed in the nozzle guide vane (NGV) passage. It has a constant thickness with a cylindrical surface and is manufactured by a stereolithography (SLA) method. Four different LE fillets are designed, and they are attached to both cylindrical Flat Insert and the contoured endwall. Total pressure measurements are taken at rotor inlet plane with Kiel probe. The probe traversing is completed with one vane pitch and from 8% to 38% span. For one of the designs, area averaged loss is reduced by 15.06%. The simulation estimated this reduction as 7.11%. Computational evaluation is performed with the rotating domain and the rim seal flow between the NGV and the rotor blades. The most effective design reduced the mass averaged loss by 1.28% over the whole passage at the NGV exit.

scholarly journals Aerodynamic Analysis of Multistage Turbomachinery Flows in Support of Aerodynamic Design

1999 ◽  
Author(s):  
John J. Adamczyk
Keyword(s):  
Unsteady Flow ◽  
Axial Flow ◽  
Operating Conditions ◽  
Design Environment ◽  
Cfd Simulations ◽  
Average Flow ◽  
Flow Models ◽  
Time Average ◽  
Semi Empirical ◽  
Future Work

This paper summarizes the state of 3D CFD based models of the time average flow field within axial flow multistage turbomachines. Emphasis is placed on models which are compatible with the industrial design environment and those models which offer the potential of providing credible results at both design and off-design operating conditions. The need to develop models which are free of aerodynamic input from semi-empirical design systems is stressed. The accuracy of such models is shown to be dependent upon their ability to account for the unsteady flow environment in multistage turbomachinery. The relevant flow physics associated with some of the unsteady flow processes present in axial flow multistage machinery are presented along with procedures which can be used to account for them in 3D CFD simulations. Sample results are presented for both axial flow compressors and axial flow turbines which help to illustrate the enhanced predictive capabilities afforded by including these procedures in 3D CFD simulations. Finally, suggestions are given for future work on the development of time average flow models.

Sign in / Sign up

Export Citation Format

Share Document