scholarly journals DEVELOPMENT AND IN VIVO TESTING OF RECONFIGURABLE NEURAL PROBES FOR CHRONIC ELECTRICAL RECORDING

2014 ◽  
Author(s):  
A. Dighe ◽  
U.P. Froriep ◽  
M. Sunshine ◽  
A. Ievins ◽  
P. Anikeeva ◽  
...  
Keyword(s):  
Neural Probes ◽  
Electrical Recording ◽  
In Vivo Testing

scholarly journals Dextran as a Resorbable Coating Material for Flexible Neural Probes

Micromachines ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 61 ◽  
Author(s):  
Dries Kil ◽  
Marta Bovet Carmona ◽  
Frederik Ceyssens ◽  
Marjolijn Deprez ◽  
Luigi Brancato ◽  
...  
Keyword(s):  
Immunological Response ◽  
Scar Tissue ◽  
Coating Material ◽  
Dissolution Time ◽  
Electrode Arrays ◽  
Neural Probes ◽  
Neuron Density ◽  
Flexible Polymer ◽  
In Vivo Testing

In the quest for chronically reliable and bio-tolerable brain interfaces there has been a steady evolution towards the use of highly flexible, polymer-based electrode arrays. The reduced mechanical mismatch between implant and brain tissue has shown to reduce the evoked immune response, which in turn has a positive effect on signal stability and noise. Unfortunately, the low stiffness of the implants also has practical repercussions, making surgical insertion extremely difficult. In this work we explore the use of dextran as a coating material that temporarily stiffens the implant, preventing buckling during insertion. The mechanical properties of dextran coated neural probes are characterized, as well as the different parameters which influence the dissolution rate. Tuning parameters, such as coating thickness and molecular weight of the used dextran, allows customization of the stiffness and dissolution time to precisely match the user’s needs. Finally, the immunological response to the coated electrodes was analyzed by performing a histological examination after four months of in vivo testing. The results indicated that a very limited amount of glial scar tissue was formed. Neurons have also infiltrated the area that was initially occupied by the dissolving dextran coating. There was no noticeable drop in neuron density around the site of implantation, confirming the suitability of the coating as a temporary aid during implantation of highly flexible polymer-based neural probes.

Synthesis, Properties, and in vivo Testing of Biogenic Ferrihydrite Nanoparticles

2020 ◽  
Vol 84 (11) ◽  
pp. 1366-1369
Author(s):  
S. V. Stolyar ◽  
V. P. Ladygina ◽  
A. V. Boldyreva ◽  
O. A. Kolenchukova ◽  
A. M. Vorotynov ◽  
...  
Keyword(s):  
Synthesis Properties ◽  
In Vivo Testing

Aspiration Revisited: Prospective Evaluation of a Physiologically Pressurized Model With Animal Correlation and Broader Applicability to Filler Complications

2021 ◽  
Author(s):  
Hyoung-Jin Moon ◽  
Won Lee ◽  
Ji-Soo Kim ◽  
Eun-Jung Yang ◽  
Hema Sundaram
Keyword(s):  
Normal Saline ◽  
False Negative ◽  
Vascular Complications ◽  
Filler Injection ◽  
Negative Results ◽  
Needle Position ◽  
False Negative Results ◽  
In Vivo Testing

Abstract Background Aspiration testing before filler injection is controversial. Some believe that aspiration can help prevent inadvertent intravascular injection, while others cite false-negative results and question its value given that the needle position always changes somewhat during injection procedures. Objectives To test the relation of false-negative results to the viscosity of the material within the needle lumen and determine whether a less viscous material within the needle lumen could decrease the incidence of false-negative results. Methods In vitro aspiration tests were performed using 30-G and 27-G needle gauges, two cross-linked hyaluronic acid fillers, normal saline bags pressurized at 140 and 10 mmHg to mimic human arterial and venous pressures, and three needle lumen conditions (normal saline, air, and filler). Testing was repeated three times under each study condition (72 tests in total). For in vivo correlation, aspiration tests were performed on femoral arteries and central auricular veins in three rabbits (4–5 aspirations per site, 48 tests in total). Results In vitro and in vivo testing using 30-G needles containing filler both showed false-negative results on aspiration testing. In vitro and in vivo testing using needles containing saline or air showed positive findings. Conclusions False-negative results from aspiration testing may be reduced by pre-filling the needle lumen with saline rather than a filler. The pressurized system may help overcome challenges of animal models with intravascular pressures significantly different from those of humans. The adaptability of this system to mimic various vessel pressures may facilitate physiologically relevant studies of vascular complications.

scholarly journals Effective decellularisation of human saphenous veins for biocompatible arterial tissue engineering applications: Bench optimisation and feasibility in vivo testing

2021 ◽  
Vol 12 ◽  
pp. 204173142098752
Author(s):  
Nadiah S Sulaiman ◽  
Andrew R Bond ◽  
Vito D Bruno ◽  
John Joseph ◽  
Jason L Johnson ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Mechanical Strength ◽  
Vascular Tissue ◽  
Sodium Dodecyl ◽  
Host Cells ◽  
Replacement Model ◽  
In Vivo Testing ◽  
Vascular Scaffolds

Human saphenous vein (hSV) and synthetic grafts are commonly used conduits in vascular grafting, despite high failure rates. Decellularising hSVs (D-hSVs) to produce vascular scaffolds might be an effective alternative. We assessed the effectiveness of a detergent-based method using 0% to 1% sodium dodecyl sulphate (SDS) to decellularise hSV. Decellularisation effectiveness was measured in vitro by nuclear counting, DNA content, residual cell viability, extracellular matrix integrity and mechanical strength. Cytotoxicity was assessed on human and porcine cells. The most effective SDS concentration was used to prepare D-hSV grafts that underwent preliminary in vivo testing using a porcine carotid artery replacement model. Effective decellularisation was achieved with 0.01% SDS, and D-hSVs were biocompatible after seeding. In vivo xeno-transplantation confirmed excellent mechanical strength and biocompatibility with recruitment of host cells without mechanical failure, and a 50% patency rate at 4-weeks. We have developed a simple biocompatible methodology to effectively decellularise hSVs. This could enhance vascular tissue engineering toward future clinical applications.

scholarly journals In vivo testing of the low-flow CO2 removal application of a compact, platform respiratory device

2020 ◽  
Vol 8 (1) ◽  
Author(s):  
Alexandra G. May ◽  
Ryan A. Orizondo ◽  
Brian J. Frankowski ◽  
Sang-Ho Ye ◽  
Ergin Kocyildirim ◽  
...  
Keyword(s):  
Low Flow ◽  
Co2 Removal ◽  
In Vivo Testing

scholarly journals Whither Magnetic Hyperthermia? A Tentative Roadmap

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 706
Author(s):  
Irene Rubia-Rodríguez ◽  
Antonio Santana-Otero ◽  
Simo Spassov ◽  
Etelka Tombácz ◽  
Christer Johansson ◽  
...  
Keyword(s):  
Clinical Trials ◽  
Nanoparticle Synthesis ◽  
Careful Analysis ◽  
Magnetic Hyperthermia ◽  
Lessons Learned ◽  
In Vivo Testing ◽  
Evolution Of Science ◽  
Made In ◽  
Critical Aspects

The scientific community has made great efforts in advancing magnetic hyperthermia for the last two decades after going through a sizeable research lapse from its establishment. All the progress made in various topics ranging from nanoparticle synthesis to biocompatibilization and in vivo testing have been seeking to push the forefront towards some new clinical trials. As many, they did not go at the expected pace. Today, fruitful international cooperation and the wisdom gain after a careful analysis of the lessons learned from seminal clinical trials allow us to have a future with better guarantees for a more definitive takeoff of this genuine nanotherapy against cancer. Deliberately giving prominence to a number of critical aspects, this opinion review offers a blend of state-of-the-art hints and glimpses into the future of the therapy, considering the expected evolution of science and technology behind magnetic hyperthermia.

scholarly journals Hybrid Multisite Silicon Neural Probe with Integrated Flexible Connector for Interchangeable Packaging

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2605
Author(s):  
Ashley Novais ◽  
Carlos Calaza ◽  
José Fernandes ◽  
Helder Fonseca ◽  
Patricia Monteiro ◽  
...  
Keyword(s):  
Fabrication Process ◽  
High Signal ◽  
Wafer Level ◽  
Neural Probes ◽  
Insertion Force ◽  
Precise Integration ◽  
Flexible Cable ◽  
Flexible Polymer ◽  
Hybrid Silicon

Multisite neural probes are a fundamental tool to study brain function. Hybrid silicon/polymer neural probes combine rigid silicon and flexible polymer parts into one single device and allow, for example, the precise integration of complex probe geometries, such as multishank designs, with flexible biocompatible cabling. Despite these advantages and benefiting from highly reproducible fabrication methods on both silicon and polymer substrates, they have not been widely available. This paper presents the development, fabrication, characterization, and in vivo electrophysiological assessment of a hybrid multisite multishank silicon probe with a monolithically integrated polyimide flexible interconnect cable. The fabrication process was optimized at wafer level, and several neural probes with 64 gold electrode sites equally distributed along 8 shanks with an integrated 8 µm thick highly flexible polyimide interconnect cable were produced. The monolithic integration of the polyimide cable in the same fabrication process removed the necessity of the postfabrication bonding of the cable to the probe. This is the highest electrode site density and thinnest flexible cable ever reported for a hybrid silicon/polymer probe. Additionally, to avoid the time-consuming bonding of the probe to definitive packaging, the flexible cable was designed to terminate in a connector pad that can mate with commercial zero-insertion force (ZIF) connectors for electronics interfacing. This allows great experimental flexibility because interchangeable packaging can be used according to experimental demands. High-density distributed in vivo electrophysiological recordings were obtained from the hybrid neural probes with low intrinsic noise and high signal-to-noise ratio (SNR).

scholarly journals The identification of novel immunogenic antigens as potential Shigella vaccine components

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Ruklanthi de Alwis ◽  
Li Liang ◽  
Omid Taghavian ◽  
Emma Werner ◽  
Hao Chung The ◽  
...  
Keyword(s):  
Core Genome ◽  
Genomic Analysis ◽  
Carrier Proteins ◽  
Vaccine Candidates ◽  
Vaccine Antigens ◽  
Bactericidal Antibody ◽  
In Vivo Testing ◽  
Species Specific ◽  
Selection Of

Abstract Background Shigella is a major diarrheal pathogen for which there is presently no vaccine. Whole genome sequencing provides the ability to predict and derive novel antigens for use as vaccines. Here, we aimed to identify novel immunogenic Shigella antigens that could serve as Shigella vaccine candidates, either alone, or when conjugated to Shigella O-antigen. Methods Using a reverse vaccinology approach, where genomic analysis informed the Shigella immunome via an antigen microarray, we aimed to identify novel immunogenic Shigella antigens. A core genome analysis of Shigella species, pathogenic and non-pathogenic Escherichia coli, led to the selection of 234 predicted immunogenic Shigella antigens. These antigens were expressed and probed with acute and convalescent serum from microbiologically confirmed Shigella infections. Results Several Shigella antigens displayed IgG and IgA seroconversion, with no difference in sero-reactivity across by sex or age. IgG sero-reactivity to key Shigella antigens was observed at birth, indicating transplacental antibody transfer. Six antigens (FepA, EmrK, FhuA, MdtA, NlpB, and CjrA) were identified in in vivo testing as capable of producing binding IgG and complement-mediated bactericidal antibody. Conclusions These findings provide six novel immunogenic Shigella proteins that could serve as candidate vaccine antigens, species-specific carrier proteins, or targeted adjuvants.

Sign in / Sign up

Export Citation Format

Share Document