Laboratory Evaluation of Sound Absorption Characteristics of Pervious Concrete Pavement Materials

2017 ◽  
Vol 2629 (1) ◽  
pp. 91-103 ◽  
Author(s):  
Longjia Chu ◽  
Tien F. Fwa ◽  
Kiang H. Tan
Keyword(s):  
Sound Absorption ◽  
Field Testing ◽  
Concrete Pavement ◽  
Pervious Concrete ◽  
Practical Significance ◽  
Laboratory Evaluation ◽  
Portland Cement Concrete ◽  
Frequency Range ◽  
Pavement Materials ◽  
Absorption Characteristics

This paper describes a laboratory study on the sound absorption characteristics of clogged and unclogged pervious concrete (PC) pavement materials compared with those of porous asphalt (PA) mixtures and those of conventional dense-graded asphalt and portland cement concrete pavement materials. Examined in this study were the effects of the mixtures’ initial porosity on their sound absorption characteristics and how these characteristics were affected by subsequent clogging of the mixtures. Four porosity levels of PC and PA were studied: 10%, 15%, 20%, and 25%. The mixtures with 20% porosity were tested for the effects of clogging. The test results showed that the shapes of sound absorption spectra of PC and PA materials were similar displayed high sound absorption values within the frequency range of 250 to 1,000 Hz. However, for all four porosity levels studied, the PC materials produced about 0.1 or 20% higher sound absorption coefficient values throughout the entire measured frequency range from 100 to 2,500 Hz. The same order of magnitude of differences in the sound absorption values between PC and PA was also observed in their clogged states. The finding that PC exhibits a better sound absorption capability than PA is of practical significance. The results of this study also demonstrate that laboratory testing of sound absorption can be employed to provide a useful indicative assessment of the noise reduction properties of porous pavement materials without the need for full-scale field testing.

scholarly journals Elucidating the Sound Absorption Characteristics of Foxtail Millet (Setariaitalica) Husk

Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5126
Author(s):  
Dhayalini Balasubramanian ◽  
Senthil Rajendran ◽  
Bhuvanesh Srinivasan ◽  
Nirmalakumari Angamuthu
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Foxtail Millet ◽  
Air Gap ◽  
Composite Panel ◽  
Sound Absorption Coefficient ◽  
Mass Content ◽  
Frequency Range ◽  
Backing Material ◽  
Absorption Characteristics

The current study deals with the analysis of sound absorption characteristics of foxtail millet husk powder. Noise is one the most persistent pollutants which has to be dealt seriously. Foxtail millet is a small seeded cereal cultivated across the world and its husk is less explored for its utilization in polymer composites. The husk is the outer protective covering of the seed, rich in silica and lingo-cellulose content making it suitable for sound insulation. The acoustic characterization is done for treated foxtail millet husk powder and polypropylene composite panels. The physical parameters like fiber mass content, density, and thickness of the composite panel were varied and their influence over sound absorption was mapped. The influence of porosity, airflow resistance, and tortuosity was also studied. The experimental result shows that 30-mm thick foxtail millet husk powder composite panel with 40% fiber mass content, 320 kg/m3 density showed promising sound absorption for sound frequency range above 1000 Hz. We achieved noise reduction coefficient (NRC) value of 0.54. In view to improve the performance of the panel in low-frequency range, we studied the efficiency of incorporating air gap and rigid backing material to the designed panel. We used foxtail millet husk powder panel of density 850 kg/m3 as rigid backing material with varying air gap thickness. Thus the composite of 320 kg/m3 density, 30-mm thick when provided with 35-mm air gap and backing material improved the composite’s performance in sound frequency range 250 Hz to 1000 Hz. The overall sound absorption performance was improved and the NRC value and average sound absorption coefficient (SAC) were increased to 0.7 and 0.63 respectively comparable with the commercial acoustic panels made out of the synthetic fibers. We have calculated the sound absorption coefficient values using Delany and Bezlay model (D&B model) and Johnson–Champoux–Allard model (JCA model) and compared them with the measured sound absorption values.

Sound Absorption Characteristics of Composite Panel Made from Coconut Coir and Oil Palm Empty Fruit Bunches Fibre with Polyester

2021 ◽  
Vol 18 (3) ◽  
pp. 9022-9028
Author(s):  
M. Rusli ◽  
R.S. Nanda ◽  
H. Dahlan ◽  
M. Bur ◽  
M. Okuma
Keyword(s):  
Absorption Coefficient ◽  
Oil Palm ◽  
Sound Absorption ◽  
Natural Fibre ◽  
Composite Panel ◽  
Frequency Range ◽  
Empty Fruit Bunches ◽  
Coir Fibre ◽  
Coconut Coir ◽  
Absorption Characteristics

The development of pure natural fibres as sound absorptive material remains overlooked due to their lack of mechanical and moist properties, low durability, and vulnerability to be damaged by the environment. Certain fibre treatments are needed to improve such disadvantages. This paper investigates sound absorption characteristics of coconut fibre (coir) and oil palm fibre made from empty fruit bunches (OPEFB) fibre bonded by polyester that can protect them from the ambient environment in order to increase their durability. Two types of fibre-polyester composites have been tested. The first is the fibre-polyester composite (FPC) type, which is totally coated with polyester as the composite matrix. Another type is the fibre-polyester bonded composite (FPBC), in which the polyester is brushed into slice by a slice of the fibre layer in order to coat and bond the fibre, although porous among the fibre remains possible. A two-channel impedance tube is used in the measurement within 200 Hz to 3000 Hz of the frequency range. It is found that FPBC type panel has almost similar sound absorption characteristics to its purely natural fibre as it is able to maintain the panel porosity. The coconut coir fibre panel and its composite have a maximum absorption coefficient of almost 100% within the frequency range 1500-2000 Hz, considerably better than the OPEFB fibre, with only about 80% of the absorption coefficient. If the FPC layer exists, the sound absorption is reduced, and the frequency peaks are also shifted. Additions of the FPC panel layer thickness produced lower sound absorptions and shifted the peaks to the lower frequency range. The FPBC panel type is viable to protect the fibre from the environment without changing its sound absorption characteristics.

scholarly journals Effect of Porous Materials Combination in Layers on Sound Absorption Characteristics

2015 ◽  
Vol 773-774 ◽  
pp. 210-215
Author(s):  
Muhd Hafeez Zainulabidin ◽  
M.H.M. Yusuff ◽  
Al Emran Ismail ◽  
M.Z. Kasron ◽  
A.S.M. Kassim
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Low Frequency ◽  
Sound Absorption Coefficient ◽  
Frequency Range ◽  
Sound Absorber ◽  
Number Of Layers ◽  
Combination Number ◽  
Impedance Tubes ◽  
Absorption Characteristics

This paper describes the investigation and analysis on two materials in which one material is a relatively good sound absorber at low frequency range and another is a relatively good sound absorber at high frequency range, combined together in layers to form a better sound absorber for a wider range of frequencies. The layer combinations of the materials are varied and the values of Sound Absorption Coefficient, α are measured experimentally by using impedance tubes with two microphones transfer function method according to ISO 10534-2 standard. The results obtained are compared in terms of the order of material and the number of layer combinations of materials for each sample. The orders of combinations and number of layers of combinations have significant influence on the sound absorption characteristics. The order of materials has reversed effect on Sound Absorption Coefficient, α as the number of layer combination is increased. Increase in the combination number will make the specimen performed relatively better at a wider frequency range.

scholarly journals Acoustic Panels Made of Paper Sludge and Clay Composites

2021 ◽  
Vol 13 (2) ◽  
pp. 637
Author(s):  
Tomas Astrauskas ◽  
Tomas Januševičius ◽  
Raimondas Grubliauskas
Keyword(s):  
Absorption Coefficient ◽  
Sound Absorption ◽  
Composite Panel ◽  
Sound Absorption Coefficient ◽  
Core Material ◽  
Paper Sludge ◽  
Frequency Range ◽  
Absorption Properties ◽  
Air Gaps ◽  
The Core

Studies on recycled materials emerged during recent years. This paper investigates samples’ sound absorption properties for panels fabricated of a mixture of paper sludge (PS) and clay mixture. PS was the core material. The sound absorption was measured. We also consider the influence of an air gap between panels and rigid backing. Different air gaps (50, 100, 150, 200 mm) simulate existing acoustic panel systems. Finally, the PS and clay composite panel sound absorption coefficients are compared to those for a typical commercial absorptive ceiling panel. The average sound absorption coefficient of PS-clay composite panels (αavg. in the frequency range from 250 to 1600 Hz) was up to 0.55. The resulting average sound absorption coefficient of panels made of recycled (but unfinished) materials is even somewhat higher than for the finished commercial (finished) acoustic panel (αavg. = 0.51).

Sign in / Sign up

Export Citation Format

Share Document