scholarly journals Realistic Car-Following Models for Microscopic Simulation of Adaptive and Cooperative Adaptive Cruise Control Vehicles

2017 ◽  
Vol 2623 (1) ◽  
pp. 1-9 ◽  
Author(s):  
Lin Xiao ◽  
Meng Wang ◽  
Bart van Arem
Keyword(s):  
Adaptive Cruise Control ◽  
Model Performance ◽  
Cruise Control ◽  
Vehicle Collisions ◽  
Car Following ◽  
Cooperative Adaptive Cruise Control ◽  
Proposed Model ◽  
Wide Range ◽  
Car Following Model ◽  
Vehicle Response

Adaptive cruise control (ACC) and cooperative adaptive cruise control (CACC) are important technologies for the achievement of vehicle automation, and their effect on traffic systems generally is evaluated with microscopic traffic simulations. A successful simulation requires realistic vehicle behavior and minimal vehicle collisions. However, most existing ACC-CACC simulation studies used simplified models that were not based on real vehicle response. The studies rarely addressed collision avoidance in the simulation. The study presented in this paper developed a realistic and collision-free car-following model for ACC-CACC vehicles. A multiregime model combining a realistic ACC-CACC system with driver intervention for vehicle longitudinal motions is proposed. This model assumes that a human driver resumes vehicle control either according to his or her assessment or after a collision warning asks the driver to take over. The proposed model was tested in a wide range of scenarios to explore model performance and collision possibilities. The testing scenarios included three regular scenarios of stop-and-go, approaching, and cut-out maneuvers, as well as two extreme safety-concerned maneuvers of hard brake and cut-in. The simulation results show that the proposed model is collision free in the full-speed-range operation with leader accelerations within −1 to 1 m/s2 and in approaching and cut-out scenarios. Those results indicate that the proposed ACC-CACC car-following model can produce realistic vehicle response without causing vehicle collisions in regular scenarios for vehicle string operations.

Fuel consumptions and exhaust emissions induced by cooperative adaptive cruise control strategies

2015 ◽  
Vol 29 (14) ◽  
pp. 1550084 ◽  
Author(s):  
Shaowei Yu ◽  
Zhongke Shi
Keyword(s):  
Adaptive Cruise Control ◽  
Control Strategies ◽  
Exhaust Emissions ◽  
Cruise Control ◽  
Difference Model ◽  
Velocity Difference ◽  
Car Following ◽  
Road Traffic Safety ◽  
Cooperative Adaptive Cruise Control ◽  
Car Following Model

Many cooperative adaptive cruise control strategies have been presented to improve traffic efficiency as well as road traffic safety, but scholars have rarely explored the impacts of these strategies on cars' fuel consumptions and exhaust emissions. In this paper, we respectively select two-velocity difference model, multiple velocity difference model and the car-following model considering multiple preceding cars' accelerations to investigate each car's fuel consumptions, carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides ( NO X ) emissions and carry out comparative analysis. The comparisons of fuel consumptions and exhaust emissions in three different cruise control strategies show that cooperative cars simulated by the car-following model considering multiple preceding cars' accelerations can run with the minimal fuel consumptions, CO, HC and NO X emissions, thus, taking the car-following model considering multiple preceding cars' accelerations as the cooperative adaptive cruise control strategy can significantly improve cars' fuel efficiency and exhaust emissions.

Effects of adaptive and cooperative adaptive cruise control on the fuel consumption and emissions at the signalized intersection

2018 ◽  
Vol 32 (32) ◽  
pp. 1850396 ◽  
Author(s):  
Hongjun Cui ◽  
Jiangke Xing ◽  
Xia Li ◽  
Minqing Zhu
Keyword(s):  
Fuel Consumption ◽  
Red Light ◽  
Signalized Intersection ◽  
Environmental Benefit ◽  
Cruise Control ◽  
Car Following ◽  
Vehicle Type ◽  
Cooperative Adaptive Cruise Control ◽  
Car Following Model ◽  
Fuel Consumption And Emissions

In this paper, the HDM car-following model, the IIDM car-following model and the IDM car-following model with a constant-acceleration heuristic is utilized to explore the effects of ACC/CACC on the fuel consumption and emissionsat the signalized intersection. Two simulation experiments are studied: (i) one with free road ahead and (ii) the second with a red light 300 m downstream at the second intersection. The numerical results show that CACC vehicle is the best vehicle type among the three vehicle types from the perspective of vehicle’s cumulative fuel consumptions and cumulative exhaust emissions. The results of this paper also suggest a very high environmental benefit of ACC/CACC at little or no cost in infrastructure.

Evaluation of Driver Car-Following Behavior Models for Cooperative Adaptive Cruise Control Systems

2017 ◽  
Vol 2622 (1) ◽  
pp. 84-95 ◽  
Author(s):  
Mizanur Rahman ◽  
Mashrur Chowdhury ◽  
Kakan Dey ◽  
M. Rafiul Islam ◽  
Taufiquar Khan
Keyword(s):  
Vehicle Dynamics ◽  
Adaptive Cruise Control ◽  
User Acceptance ◽  
Evaluation Framework ◽  
Cruise Control ◽  
String Stability ◽  
Maximum Acceleration ◽  
Car Following ◽  
Cooperative Adaptive Cruise Control ◽  
Behavior Models

A cooperative adaptive cruise control (CACC) system targeted to obtain a high level of user acceptance must replicate the driving experience in each CACC vehicle without compromising the occupant’s comfort. “User acceptance” can be defined as the safety and comfort of the occupant in the CACC vehicle in terms of acceptable vehicle dynamics (i.e., the maximum acceleration or deceleration) and string stability (i.e., the fluctuations in the vehicle’s position, speed, and acceleration). The primary objective of this study was to develop an evaluation framework for the application of a driver car-following behavior model in CACC system design to ensure user acceptance in terms of vehicle dynamics and string stability. The authors adopted two widely used driver car-following behavior models, ( a) the optimum velocity model (OVM) and ( b) the intelligent driver model (IDM), to prove the efficacy of the evaluation framework developed in this research for CACC system design. A platoon of six vehicles was simulated for three traffic flow states (uniform speed, speed with constant acceleration, and speed with constant deceleration) with different acceleration and deceleration rates. The maximum acceleration or deceleration and the sum of the squares of the errors of the follower vehicle speed were measured to evaluate user acceptance in terms of vehicle dynamics and string stability. Analysis of the simulation results revealed that the OVM performed better at modeling a CACC system than did the IDM in terms of acceptable vehicle dynamics and string stability.

Multi-Vehicle Trajectory Design During Cooperative Adaptive Cruise Control Platoon Formation

2020 ◽  
Vol 2674 (4) ◽  
pp. 30-41 ◽  
Author(s):  
Qinzheng Wang ◽  
Xianfeng (Terry) Yang ◽  
Zhitong Huang ◽  
Yun Yuan
Keyword(s):  
Fuel Consumption ◽  
Adaptive Cruise Control ◽  
Second Phase ◽  
Trajectory Design ◽  
Cruise Control ◽  
Basic Scenario ◽  
Vehicle Trajectories ◽  
Cooperative Adaptive Cruise Control ◽  
Proposed Model ◽  
Study Results

Cooperative adaptive cruise control (CACC) organizes connected and automated vehicles (CAVs) in platoons to improve traffic flow and reduce fuel consumption. Platoon formation involves a very complex process, however, because lateral and longitudinal misbehavior of CAVs results in greater fuel consumption and risk of collision. This study aims to design optimal vehicle trajectories of CAVs during CACC platoon formation. First, a basic scenario and a destination-based protocol are described to determine vehicle sequence in the platoon. A space-time lattice based model is then formulated to construct vehicle trajectories considering boundary conditions of kinematic limits, vehicle-following safety, and lane-changing rules. The objective is to optimize the vehicle sequence and fuel consumption simultaneously. A two-phase algorithm is proposed to solve this model, where the first phase is a heuristic algorithm that determines vehicle sequence and in the second phase dynamic programming is adapted to optimize fuel consumption based on the determined sequence. To evaluate the effectiveness of the proposed model in designing CAV trajectories, extensive experimental tests have been conducted in this study. Results show that the proposed model and algorithm can effectively optimize CAV sequence in the platoon based on their destinations. After optimization, CAV fuel consumption was reduced by 42%, 46%, and 43%, respectively, in three different tested scenarios.

scholarly journals Assessment of ACC and CACC systems using SUMO

10.29007/r343 ◽  
2018 ◽  
Author(s):  
Kallirroi N. Porfyri ◽  
Evangelos Mintsis ◽  
Evangelos Mitsakis
Keyword(s):  
Adaptive Cruise Control ◽  
Flow Characteristics ◽  
Simulation Models ◽  
Cruise Control ◽  
Traffic Efficiency ◽  
Cooperative Adaptive Cruise Control ◽  
Automation Systems ◽  
Full Speed ◽  
Car Following Model ◽  
The Impact

Emerging developments in the field of automotive technologies, such as Adaptive Cruise Control (ACC) and Cooperative Adaptive Cruise Control (CACC) systems, are expected to enhance traffic efficiency and safety on highways and urban roads. For this reason, substantial effort has been made by researchers to model and simulate these automation systems over the last few years. This study aims to integrate a recently developed car-following model for ACC and CACC equipped vehicles in the microscopic traffic simulation tool SUMO; the implemented ACC/CACC simulation models originate from empirical ones, ensuring the collision-free property in the full-speed-range operation. Simulation experiments for different penetration rates of cooperative automated vehicles, desired time-gap settings and network topologies are conducted to test the validity of the proposed approach and to assess the impact of ACC and CACC equipped vehicles on traffic flow characteristics.

scholarly journals Car-following Model of Connected Cruise Control Vehicles to Mitigate Traffic Oscillations

2019 ◽  
Vol 31 (6) ◽  
pp. 603-610
Author(s):  
Yanyan Qin ◽  
Hao Wang ◽  
Quan Chen ◽  
Bin Ran
Keyword(s):  
Cruise Control ◽  
Difference Model ◽  
Velocity Difference ◽  
Electronic Throttle ◽  
Car Following ◽  
Time Simulation ◽  
Proposed Model ◽  
Car Following Model ◽  
Traffic Oscillations ◽  
Better Than

With the aim of mitigating traffic oscillations, this paper extends a car-following model for Connected Cruise Control (CCC) systems by considering electronic throttle angles of multiple cars ahead. The linear stability condition of the proposed model is derived and numerical simulations are performed. It has been found that the proposed model is prominently better than the previous model, i.e. full velocity difference model, from the perspective of mitigating traffic oscillations. Additionally, the proposed model can also reduce fuel consumption, emissions, i.e. CO, HC and NOX, safety risk, and improve driving comfort at the same time. Simulation results suggest that the CCC car-following control design should consider the effect of multiple electronic throttle angles from the preceding cars.

scholarly journals Modeling Microscopic Car-Following Strategy of Mixed Traffic to Identify Optimal Platoon Configurations for Multiobjective Decision-Making

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Mudasser Seraj ◽  
Jiangchen Li ◽  
Zhijun Qiu
Keyword(s):  
Mixed Traffic ◽  
Cruise Control ◽  
Automated Driving ◽  
Driving System ◽  
Car Following ◽  
Traffic Conditions ◽  
Cooperative Adaptive Cruise Control ◽  
Traffic Stream ◽  
Car Following Model ◽  
The Cost

Microscopic detail of complex vehicle interactions in mixed traffic, involving manual driving system (MDS) and automated driving system (ADS), is imperative in determining the extent of response by ADS vehicles in the connected automated vehicle (CAV) environment. In this context, this paper proposes a naïve microscopic car-following strategy for a mixed traffic stream in CAV settings and specified shifts in traffic mobility, safety, and environmental features. Additionally, this study explores the influences of platoon properties (i.e., intra-platoon headway, inter-platoon headway, and maximum platoon length) on traffic stream characteristics. Different combinations of MDS and ADS vehicles are simulated in order to understand the variations of improvements induced by ADS vehicles in a traffic stream. Simulation results reveal that grouping ADS vehicles at the front of traffic stream to apply Cooperative Adaptive Cruise Control (CACC) based car-following model will generate maximum mobility benefits for upstream vehicles. Both mobility and environmental improvements can be realized by forming long, closely spaced ADS vehicles at the cost of reduced safety. To achieve balanced mobility, safety, and environmental advantages from mixed traffic environment, dynamically optimized platoon configurations should be determined at varying traffic conditions and ADS market penetrations.

Sign in / Sign up

Export Citation Format

Share Document