scholarly journals Assessing the Damaging Effects of Railway Dynamic Wheel Loads on Railway Foundations

2017 ◽  
Vol 2607 (1) ◽  
pp. 62-73 ◽  
Author(s):  
Michael P. N. Burrow ◽  
Jin Shi ◽  
Mohamed Wehbi ◽  
Gurmel S. Ghataora
Keyword(s):  
Good Condition ◽  
Three Dimensional ◽  
Numerical Approach ◽  
Field Investigation ◽  
Dynamic Loads ◽  
Foundation Soil ◽  
Railway Line ◽  
Track Condition ◽  
Heavy Haul ◽  
Track Quality

Dynamic train wheel loads, which can be significantly greater than static loads, occur because of a variety of factors and unless they are properly considered in track structural design, significant unplanned maintenance and premature track failure may result. This is particularly so for traditional ballasted railways built on soft foundations, because although ballast lends itself to maintenance, it is often problematic and costly to repair damaged foundations. A novel rigorous analytical–numerical approach is described to predict and characterize, for the first time, the damage to which railway foundations can be subjected as a result of dynamic loads. The approach marries a sophisticated three-dimensional dynamic model of the train–track system incorporating vertical track quality, foundation soil distress models, statistical analysis methods, and results of field investigation. The resulting analyses demonstrate that the magnitudes and distributions of dynamic loads are a function of train speed and track quality, and that specific locations experience significantly higher amounts of damage, which can lead to a variety of track faults. The approach is illustrated via a study of a heavy haul railway line in China where the wheel loads and tonnage carried are set to increase significantly. Findings from the study suggest that the thickness of the ballasted layer would need to increase by over 20% to prevent premature foundation failure provided that the track is maintained in good condition, and by significantly more should the track condition be allowed to deteriorate.

Modeling and Assessment of the Produced Water Discharges from Offshore Petroleum Platforms

2007 ◽  
Vol 42 (4) ◽  
pp. 303-310 ◽  
Author(s):  
Zhi Chen ◽  
Lin Zhao ◽  
Kenneth Lee ◽  
Charles Hannath
Keyword(s):  
Random Walk ◽  
Produced Water ◽  
Model Development ◽  
Three Dimensional ◽  
Monitoring Program ◽  
Ecological Monitoring ◽  
Numerical Approach ◽  
Ocean Model ◽  
Scale Model ◽  
Water Stream

Abstract There has been a growing interest in assessing the risks to the marine environment from produced water discharges. This study describes the development of a numerical approach, POM-RW, based on an integration of the Princeton Ocean Model (POM) and a Random Walk (RW) simulation of pollutant transport. Specifically, the POM is employed to simulate local ocean currents. It provides three-dimensional hydrodynamic input to a Random Walk model focused on the dispersion of toxic components within the produced water stream on a regional spatial scale. Model development and field validation of the predicted current field and pollutant concentrations were conducted in conjunction with a water quality and ecological monitoring program for an offshore facility located on the Grand Banks of Canada. Results indicate that the POM-RW approach is useful to address environmental risks associated with the produced water discharges.

Simulation of small-angle scattering curves by numerical Fourier transformation

2007 ◽  
Vol 40 (1) ◽  
pp. 16-25 ◽  
Author(s):  
Klaus Schmidt-Rohr
Keyword(s):  
Form Factor ◽  
Small Angle ◽  
Fourier Transformation ◽  
Three Dimensional ◽  
Power Laws ◽  
Numerical Approach ◽  
Peak Position ◽  
Two Dimensions ◽  
Correlation Peak ◽  
Scattering Intensity

A simple numerical approach for calculating theq-dependence of the scattering intensity in small-angle X-ray or neutron scattering (SAXS/SANS) is discussed. For a user-defined scattering density on a lattice, the scattering intensityI(q) (qis the modulus of the scattering vector) is calculated by three-dimensional (or two-dimensional) numerical Fourier transformation and spherical summation inqspace, with a simple smoothing algorithm. An exact and simple correction for continuous rather than discrete (lattice-point) scattering density is described. Applications to relatively densely packed particles in solids (e.g.nanocomposites) are shown, where correlation effects make single-particle (pure form-factor) calculations invalid. The algorithm can be applied to particles of any shape that can be defined on the chosen cubic lattice and with any size distribution, while those features pose difficulties to a traditional treatment in terms of form and structure factors. For particles of identical but potentially complex shapes, numerical calculation of the form factor is described. Long parallel rods and platelets of various cross-section shapes are particularly convenient to treat, since the calculation is reduced to two dimensions. The method is used to demonstrate that the scattering intensity from `randomly' parallel-packed long cylinders is not described by simple 1/qand 1/q4power laws, but at cylinder volume fractions of more than ∼25% includes a correlation peak. The simulations highlight that the traditional evaluation of the peak position overestimates the cylinder thickness by a factor of ∼1.5. It is also shown that a mix of various relatively densely packed long boards can produceI(q) ≃ 1/q, usually observed for rod-shaped particles, without a correlation peak.

scholarly journals Field Investigation and Rapid Deterioration Analysis of Heavy Haul Corrugation

2021 ◽  
Vol 11 (14) ◽  
pp. 6317
Author(s):  
Feng Jin ◽  
Hong Xiao ◽  
Mahantesh M Nadakatti ◽  
Huiting Yue ◽  
Wanting Liu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Fatigue Cracks ◽  
Field Measurements ◽  
Field Investigation ◽  
The Finite Element Method ◽  
Rail Corrugation ◽  
Rapid Deterioration ◽  
Heavy Haul

In this study, the rapid growth of corrugation caused by the bad quality of grinding works and their wavelength, depth, and evolution processes are captured through field measurements. The residual grinding marks left by poor grinding quality lead to further crack accumulation and corrugation deterioration by decreasing plastic resistance in rails. In this case, the average peak-to-peak values of corrugation grow extremely fast, reaching 1.4 μm per day. The finite element method (FEM) and fracture mechanics methodologies were used to analyze the development and trends in rail surface crack deterioration by considering rails with and without grinding marks. Crack propagation trends increase with residual grinding marks, and they are more severe in circular curve lines. To avoid the rapid deterioration of rail corrugation, intersections between grinding marks and fatigue cracks should be avoided.

scholarly journals Modelling of Applied Magnetic Field and Thermal Radiations Due to the Stretching of Cylinder

Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 1077
Author(s):  
Muhammad Tamoor ◽  
Muhammad Kamran ◽  
Sadique Rehman ◽  
Aamir Farooq ◽  
Rewayat Khan ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Fluid Velocity ◽  
Three Dimensional ◽  
Numerical Approach ◽  
Skin Friction Coefficient ◽  
Physical Parameters ◽  
Boundary Layer Equations ◽  
Convective Parameter ◽  
Momentum And Heat Transfer ◽  
Dimensional Boundary

In this study, a numerical approach was adopted in order to explore the analysis of magneto fluid in the presence of thermal radiation combined with mixed convective and slip conditions. Using the similarity transformation, the axisymmetric three-dimensional boundary layer equations were reduced to a self-similar form. The shooting technique, combined with the Range–Kutta–Fehlberg method, was used to solve the resulting coupled nonlinear momentum and heat transfer equations numerically. When physically interpreting the data, some important observations were made. The novelty of the present study lies in finding help to control the rate of heat transfer and fluid velocity in any industrial manufacturing processes (such as the cooling of metallic plates). The numerical results revealed that the Nusselt number decrease for larger Prandtl number, curvature, and convective parameters. At the same time, the skin friction coefficient was enhanced with an increase in both slip velocity and convective parameter. The effect of emerging physical parameters on velocity and temperature profiles for a nonlinear stretching cylinder has been thoroughly studied and analyzed using plotted graphs and tables.

scholarly journals Application of the erosion algorithm in modeling of structures behavior under impulse loads

2019 ◽  
Vol 221 ◽  
pp. 01003
Author(s):  
Pavel Radchenko ◽  
Stanislav Batuev ◽  
Andrey Radchenko
Keyword(s):  
Finite Element ◽  
High Velocity ◽  
Three Dimensional ◽  
Computer Software ◽  
Dynamic Loads ◽  
Complex Structures ◽  
Numerical Studies ◽  
Contact Surfaces ◽  
Fracture Of Materials ◽  
Solid Bodies

The paper presents results of applying approach to simulation of contact surfaces fracture under high velocity interaction of solid bodies. The algorithm of erosion -the algorithm of elements removing, of new surface building and of mass distribution after elements fracture at contact boundaries is consider. The results of coordinated experimental and numerical studies of fracture of materials under impact are given. Authors own finite element computer software program EFES, allowing to simulate a three-dimensional setting behavior of complex structures under dynamic loads, has been used for the calculations.

scholarly journals A Numerically Supported Investigation of the 3D Flow in Centrifugal Impellers: Part I — The Validation Base

1996 ◽  
Author(s):  
Ch. Hirsch ◽  
S. Kang ◽  
G. Pointel
Keyword(s):  
Boundary Layer ◽  
Three Dimensional ◽  
Boundary Layer Separation ◽  
Numerical Approach ◽  
Secondary Flows ◽  
Pump Impeller ◽  
High Loss ◽  
Leakage Flows ◽  
Fine Mesh ◽  
Radial Pump

The three-dimensional flow in centrifugal impellers is investigated on the basis of a detailed analysis of the results of numerical simulations. In order to gain confidence in this process, an in-depth validation is performed, based on computations of Krain’s centrifugal compressor and of a radial pump impeller, both with vaneless diffusers. Detailed comparisons with available experimental data provide high confidence in the numerical tools and results. The appearance of a high loss ‘wake’ region results from the transport of boundary layer material from the blade surfaces to the shroud region and its location depends on the balance between secondary and tip leakage flows and is not necessarily connected to 3D boundary layer separation. Although the low momentum spots near the shroud can interfere with 3D separated regions, the main outcome of the present analysis is that these are two distinct phenomena. Part I of this paper focuses on the validation base of the numerical approach, based on fine mesh simulations, while Part II presents an analysis of the different contributions to the secondary flows and attempts to estimate their effect on the overall flow pattern.

Thermal jet drilling of granite rock: a numerical 3D finite-element study

2021 ◽  
Vol 379 (2196) ◽  
pp. 20200128
Author(s):  
Timo Saksala ◽  
Reijo Kouhia ◽  
Ahmad Mardoukhi ◽  
Mikko Hokka
Keyword(s):  
Finite Elements ◽  
Numerical Study ◽  
Thermal Flux ◽  
Three Dimensional ◽  
Numerical Approach ◽  
Mass Scaling ◽  
Granite Rock ◽  
Fracture Dynamics ◽  
Rock Heterogeneity ◽  
Thermal Drilling

This paper presents a numerical study on thermal jet drilling of granite rock that is based on a thermal spallation phenomenon. For this end, a numerical method based on finite elements and a damage–viscoplasticity model are developed for solving the underlying coupled thermo-mechanical problem. An explicit time-stepping scheme is applied in solving the global problem, which in the present case is amenable to extreme mass scaling. Rock heterogeneity is accounted for as random clusters of finite elements representing rock constituent minerals. The numerical approach is validated based on experiments on thermal shock weakening effect of granite in a dynamic Brazilian disc test. The validated model is applied in three-dimensional simulations of thermal jet drilling with a short duration (0.2 s) and high intensity (approx. 3 MW m −2 ) thermal flux. The present numerical approach predicts the spalling as highly (tensile) damaged rock. Finally, it was shown that thermal drilling exploiting heating-forced cooling cycles is a viable method when drilling in hot rock mass. This article is part of the theme issue ‘Fracture dynamics of solid materials: from particles to the globe’.

Computational Investigation of Thrust Production of a Dolphin at Various Swimming Speeds

2021 ◽  
Author(s):  
Junshi Wang ◽  
Vadim Pavlov ◽  
Zhipeng Lou ◽  
Haibo Dong
Keyword(s):  
Surface Pressure ◽  
Swimming Performance ◽  
Three Dimensional ◽  
Numerical Approach ◽  
Immersed Boundary ◽  
Reconstruction Method ◽  
Force Coefficient ◽  
Speed Increase ◽  
Generation Mechanisms ◽  
Thrust Production

Abstract Dolphins are known for their outstanding swimming performance. However, the difference in flow physics at different speeds remains elusive. In this work, the underlying mechanisms of dolphin swimming at three speeds, 2 m/s, 5 m/s, and 8 m/s, are explored using a combined experimental and numerical approach. Using the scanned CAD model of the Atlantic white-sided dolphin (Lagenorhynchus acutus) and virtual skeleton-based surface reconstruction method, a three-dimensional high-fidelity computational model is obtained with time-varying kinematics. A sharp-interface immersed-boundary-method (IBM) based direct numerical simulation (DNS) solver is employed to calculate the corresponding thrust production, wake structure, and surface pressure at different swimming speeds. It is found that the fluke keeps its effective angle of attack at high values for about 60% of each stroke. The total pressure force coefficient along the x-axis converges as the speed increase. The flow and surface pressure analysis both show considerable differences between lower (2 m/s) and higher (5 m/s and 8 m/s) speeds. The results from this work help to bring new insight into understanding the force generation mechanisms of the highly efficient dolphin swimming and offer potential suggestions to the future designs of unmanned underwater vehicles.

Effect of Outer Fin Axial Gap on the Sealing Effectiveness and Fluid Dynamics of Radial Rim Seal

2017 ◽  
Author(s):  
Zhigang Li ◽  
Jun Li ◽  
Liming Song ◽  
Qing Gao ◽  
Xin Yan ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Flow Rate ◽  
Gas Turbines ◽  
Flow Behavior ◽  
Three Dimensional ◽  
Numerical Approach ◽  
Coolant Flow ◽  
Coolant Flow Rate ◽  
Navier Stokes ◽  
Hot Gas

The modern gas turbine is widely applied in the aviation propulsion and power generation. The rim seal is usually designed at the periphery of the wheel-space and prevented the hot gas ingestion in modern gas turbines. The high sealing effectiveness of rim seal can improve the aerodynamic performance of gas turbines and avoid of the disc overheating. Effect of outer fin axial gap of radial rim seal on the sealing effectiveness and fluid dynamics was numerically investigated in this work. The sealing effectiveness and fluid dynamics of radial rim seal with three different outer fin axial gaps was conducted at different coolant flow rates using three-dimensional Reynolds-Averaged Navier-Stokes (RANS) and SST turbulent model solutions. The accuracy of the presented numerical approach for the prediction of the sealing performance of the turbine rim seal was demonstrated. The obtained results show that the sealing effectiveness of radial rim seal increases with increase of coolant flow rate at the fixed axial outer fin gap. The sealing effectiveness increases with decrease of the axial outer fin gap at the fixed coolant flow rate. Furthermore, at the fixed coolant flow rate, the hot gas ingestion increases with the increase of the axial outer fin gap. This flow behavior intensifies the interaction between the hot gas and coolant flow at the clearance of radial rim seal. The preswirl coefficient in the wheel-space cavity is also illustrated to analyze the flow dynamics of radial rim seal at different axial outer fin gaps.

Sign in / Sign up

Export Citation Format

Share Document