scholarly journals Characterization of Real-World Particle Number Emissions during Reignition Events from a 2010 Light-Duty Hybrid Electric Vehicle

2015 ◽  
Vol 2503 (1) ◽  
pp. 137-146 ◽  
Author(s):  
Matt Conger ◽  
Britt A. Holmén
Keyword(s):  
Real World ◽  
Hybrid Electric Vehicle ◽  
Particle Number ◽  
Combustion Engine ◽  
Operating Mode ◽  
Emission Rates ◽  
Engine Operation ◽  
Conventional Vehicle ◽  
Hybrid Electric ◽  
Consumption Benefits

Despite the increasing popularity of hybrid electric vehicles (HEVs), few studies have compared the real-world particle emissions of HEVs from internal combustion engine (ICE) reignition events with that of a conventional vehicle (CV) during real-world driving. Reignition events occur under unstable combustion conditions and frequently result in particle number (PN) emission rates (PNERs) that exceed those for stabilized engine operation. Tailpipe PNERs from a CV and an HEV 2010 Toyota Camry were quantified on a 32-mi route over rural, urban, and freeway roadways in Chittenden County, Vermont, with the total onboard tailpipe emissions measurement system. This study directly compared the CV and HEV PNERs and characterized the operation of the HEV in a new HEV ICE operating mode framework. Mean PNER for reignition events (7.19 pM 11.8 × 1010 particles/s) were on average four times greater than for stabilized HEV operation (1.79 ± 3.99 × 1010 particles/s). Under urban, rural, and freeway driving, HEV reignition event operation accounted for 58.7%, 44.6%, and 5.0%, respectively, of the total PN inventory. Mean HEV PNER was 1.8 times greater than that of the CV in urban driving, while under freeway driving, where the two vehicles operated similarly, average CV PNER was 2.4 times greater than that of the HEV. The data show that the typical fuel consumption benefits of HEVs in urban driving are associated with a trade-off in PN emissions. The HEV ICE operating behavior has implications for the spatial distribution of PN hot spots as well as the associated microscale modeling of alternative vehicle technology emissions.

scholarly journals Comparisons of Real-World Vehicle Energy Efficiency with Dynamometer-Based Ratings and Simulation Models

2021 ◽  
Vol 12 (4) ◽  
pp. 161
Author(s):  
Karim Hamza ◽  
Kang-Ching Chu ◽  
Matthew Favetti ◽  
Peter Keene Benoliel ◽  
Vaishnavi Karanam ◽  
...  
Keyword(s):  
Energy Efficiency ◽  
Electric Vehicles ◽  
Fuel Economy ◽  
Real World ◽  
Hybrid Electric Vehicle ◽  
Energy Intensity ◽  
Hybrid Electric Vehicles ◽  
Combustion Engine ◽  
Simulation Models ◽  
Hybrid Electric

Software tools for fuel economy simulations play an important role during design stages of advanced powertrains. However, calibration of vehicle models versus real-world driving data faces challenges owing to inherent variations in vehicle energy efficiency across different driving conditions and different vehicle owners. This work utilizes datasets of vehicles equipped with OBD/GPS loggers to validate and calibrate FASTSim (software originally developed by NREL) vehicle models. The results show that window-sticker ratings (derived from dynamometer tests) can be reasonably accurate when averaged across many trips by different vehicle owners, but successfully calibrated FASTSim models can have better fidelity. The results in this paper are shown for nine vehicle models, including the following: three battery-electric vehicles (BEVs), four plug-in hybrid electric vehicles (PHEVs), one hybrid electric vehicle (HEV), and one conventional internal combustion engine (CICE) vehicle. The calibrated vehicle models are able to successfully predict the average trip energy intensity within ±3% for an aggregate of trips across multiple vehicle owners, as opposed to within ±10% via window-sticker ratings or baseline FASTSim.

scholarly journals Variability in Measured Real-World Operational Energy Use and Emission Rates of a Plug-In Hybrid Electric Vehicle

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1140 ◽  
Author(s):  
H. Christopher Frey ◽  
Xiaohui Zheng ◽  
Jiangchuan Hu
Keyword(s):  
Real World ◽  
Hybrid Electric Vehicle ◽  
Energy Use ◽  
Average Energy ◽  
Specific Power ◽  
Emission Measurement ◽  
Emission Rates ◽  
Wide Range ◽  
Hybrid Electric ◽  
Cold Starts

Compared to comparably sized conventional light duty gasoline vehicles (CLDGVs), plug-in hybrid electric vehicles (PHEVs) may offer benefits of improved energy economy, reduced emissions, and the flexibility to use electricity as an energy source. PHEVs operate in either charge depleting (CD) or charge sustaining (CS) mode; the engine has the ability to turn on and off; and the engine can have multiple cold starts. A method is demonstrated for quantifying the real-world activity, energy use, and emissions of PHEVs, taking into account these operational characteristics and differences in electricity generation resource mix. A 2013 Toyota Prius plug-in was measured using a portable emission measurement system. Vehicle specific power (VSP) based modal average energy use and emission rates are inferred to assess trends in energy use and emissions with respect to engine load and for comparisons of engine on versus engine off, and cold start versus hot stabilized running. The results show that, compared to CLDGVs, the PHEV operating in CD mode has improved energy efficiency and lower CO2, CO, HC, NOx, and PM2.5 emission rates for a wide range of power generation fuel mixes. However, PHEV energy use and emission rates are highly variable, with periods of relatively high on-road emission rates related to cold starts.

scholarly journals Understanding Real-World Variability of Hybrid Electric Vehicle Fuel Economy

2020 ◽  
Vol 9 (2) ◽  
pp. 169-184
Author(s):  
Andrew McGordon ◽  
◽  
Paul Jennings ◽  
Keyword(s):  
Fuel Economy ◽  
Real World ◽  
Hybrid Electric Vehicle ◽  
Hybrid Electric Vehicles ◽  
Combustion Engine ◽  
The Real ◽  
Hybrid Electric ◽  
Time Of Operation ◽  
Base Vehicle ◽  
Toyota Prius

The variability of fuel economy (FE) is of significant importance as that of average FE to realize FE benefits of hybrid electric vehicles (HEVs) consistently by all users in the real world. Over the years, majority of the research has been focused on improving average FE overlooking the variability. Although in recent years few studies have been focused on the reduction of FE variability, no study has been concentrated to understand why certain design has lower FE variability as that of others. This article provides a detailed analysis to decipher the reasons for the FE variability in the real world. This study considered the optimum designs based on two established design optimization methodologies considering Toyota Prius non-plug-in hybrid as a base vehicle. This study analyses the impacts of the parameters of driving patterns and the operation of powertrains on FE variability. The study explains that comparatively bigger internal combustion engine (ICE) in combination with the optimum sizes of generator motor and battery could lead to lower FE variability in the real world due to lesser time of operation of ICE to charge the battery.

Stirling system optimization for series hybrid electric vehicles

2021 ◽  
pp. 095440702110180
Author(s):  
Charbel R Ghanem ◽  
Elio N Gereige ◽  
Wissam S Bou Nader ◽  
Charbel J Mansour
Keyword(s):  
Fuel Consumption ◽  
Hybrid Electric Vehicle ◽  
Combustion Engine ◽  
Optimization Technique ◽  
System Optimization ◽  
Energy Management Strategy ◽  
Fuel Savings ◽  
Auxiliary Power ◽  
Hybrid Electric ◽  
External Combustion

There have been many studies conducted to replace the conventional internal combustion engine (ICE) with a more efficient engine, due to increasing regulations over vehicles’ emissions. Throughout the years, several external combustion engines were considered as alternatives to these traditional ICEs for their intrinsic benefits, among which are Stirling machines. These were formerly utilized in conventional powertrains; however, they were not implemented in hybrid vehicles. The purpose of this study is to investigate the possibility of implementing a Stirling engine in a series hybrid electric vehicle (SHEV) to substitute the ICE. Exergy analysis was conducted on a mathematical model, which was developed based on a real simple Stirling, to pinpoint the room for improvements. Then, based on this analysis, other configurations were retrieved to reduce exergy losses. Consequently, a Stirling-SHEV was modeled, to be integrated as auxiliary power unit (APU). Hereafter, through an exergo-technological detailed selection, the best configuration was found to be the Regenerative Reheat two stages serial Stirling (RRe-n2-S), offering the best efficiency and power combination. Then, this configuration was compared with the Regenerative Stirling (R-S) and the ICE in terms of fuel consumption, in the developed SHEV on the WLTC. This was performed using an Energy Management Strategy (EMS) consisting of a bi-level optimization technique, combining the Non-dominated Sorting Genetic Algorithm (NSGA) with the Dynamic Programming (DP). This arrangement is used to diminish the fuel consumption, while considering the reduction of the APU’s ON/OFF switching times, avoiding technical issues. Results prioritized the RRe-n2-S presenting 12.1% fuel savings compared to the ICE and 14.1% savings compared to the R-S.

Powertrain Matching Based on Driving Cycle for Fuel Cell Hybrid Electric Vehicle

2013 ◽  
Vol 288 ◽  
pp. 142-147 ◽  
Author(s):  
Shang An Gao ◽  
Xi Ming Wang ◽  
Hong Wen He ◽  
Hong Qiang Guo ◽  
Heng Lu Tang
Keyword(s):  
Fuel Cell ◽  
Electric Vehicle ◽  
Cell Hybrid ◽  
Hybrid Electric Vehicle ◽  
Combustion Engine ◽  
Driving Cycle ◽  
Power Performance ◽  
Matching Method ◽  
Hybrid Electric ◽  
Fuel Cell Hybrid

Fuel cell hybrid electric vehicle (FCHEV) is one of the most efficient technologies to solve the problems of the energy shortage and the air pollution caused by the internal-combustion engine vehicles, and its performance strongly depends on the powertrains’ matching and its energy control strategy. The theoretic matching method only based on the theoretical equation of kinetic equilibrium, which is a traditional method, could not take fully use of the advantages of FCHEV under a certain driving cycle because it doesn’t consider the target driving cycle. In order to match the powertrain that operates more efficiently under the target driving cycle, the matching method based on driving cycle is studied. The powertrain of a fuel cell hybrid electric bus (FCHEB) is matched, modeled and simulated on the AVL CRUISE. The simulation results show that the FCHEB has remarkable power performance and fuel economy.

SIMULATION OF HYBRID ELECTRIC VEHICLE BASED ON A SERIES DRIVE TRAIN LAYOUT

2016 ◽  
Vol 78 (6) ◽  
Author(s):  
Mohd Sabirin Rahmat ◽  
Fauzi Ahmad ◽  
Ahmad Kamal Mat Yamin ◽  
Noreffendy Tamaldin ◽  
Vimal Rau Aparow ◽  
...  
Keyword(s):  
Electric Vehicle ◽  
Hybrid Electric Vehicle ◽  
Combustion Engine ◽  
Automatic Transmission ◽  
Permanent Magnet Synchronous Motor ◽  
Drive Train ◽  
Maximum Speed ◽  
Power Train ◽  
Human In The Loop ◽  
Hybrid Electric

This paper provided a validated modeling and a simulation of a 6 degree freedom vehicle longitudinal model and drive-train component in a series hybrid electric vehicle. The 6-DOF vehicle dynamics model consisted of tire subsystems, permanent magnet synchronous motor which acted as the prime mover coupled with an automatic transmission, hydraulic brake subsystem, battery subsystem, alternator subsystem and internal combustion engine to supply the rotational input to the alternator. A speed and torque tracking control systems of the electric power train were developed to make sure that the power train was able to produce the desired throttle torque in accelerating the vehicle. A human-in-the-loop-simulation was utilized as a mechanism to evaluate the effectiveness of the proposed hybrid electric vehicle. The proposed simulation was used as the preliminary result in identifying the capability of the vehicle in terms of the maximum speed produced by the vehicle and the capability of the alternator to recharge the battery. Several tests had been done during the simulation, namely sudden acceleration, acceleration and braking test and unbounded motion. The results of the simulation showed that the proposed hybrid electric vehicle can produce a speed of up to 70 km/h with a reasonable charging rate to the battery. The findings from this study can be considered in terms of design, optimization and implementation in a real vehicle.

scholarly journals Single-Phase Bidirectional On-Board Charger Using Starter Generator System in Hybrid Electric Vehicles

Electronics ◽  
2018 ◽  
Vol 7 (11) ◽  
pp. 287 ◽  
Author(s):  
Seok-Min Kim ◽  
Ho-Sung Kang ◽  
Kyo-Beum Lee
Keyword(s):  
Hybrid Electric Vehicle ◽  
Single Phase ◽  
Reactive Power ◽  
Control Method ◽  
Combustion Engine ◽  
Control Methods ◽  
Generator System ◽  
Battery Charging ◽  
Hybrid Electric ◽  
Starter Generator

This paper presents the design and control methods of a single-phase bidirectional on-board charger (OBC) using a hybrid starter generator (HSG) and an inverter in a hybrid electric vehicle (HEV). In an HEV, there are a number of components, including the combustion engine, transmission, traction motor, motor controller, OBC, and HSG system. The proposed design reconfigures the HSG system to provide battery-charging capability instead of a conventional OBC based on the use of additional power relays. As a result, the number of power converters is effectively reduced through the replacement of the conventional OBC, and, thus, the power density is increased. This paper also proposes a control method for enabling not only battery charging but also a reactive power support depending on the grid command. Compared with a conventional reactive power compensation method, the proposed method has an advantage because it is located near the principal reactive power source. The simulation and experimental results verify the validity and feasibility of the proposed bidirectional OBC design and its control methods.

scholarly journals Real-Time Co-optimization of Vehicle Route and Speed Using Generic Algorithm for Improved Fuel Economy

2019 ◽  
Vol 141 (03) ◽  
pp. S08-S15
Author(s):  
Guoming G. Zhu ◽  
Chengsheng Miao
Keyword(s):  
Electric Vehicle ◽  
Electric Vehicles ◽  
Fuel Economy ◽  
Autonomous Vehicles ◽  
Hybrid Electric Vehicle ◽  
High Efficiency ◽  
Combustion Engine ◽  
Cruise Control ◽  
Vehicle Performance ◽  
Hybrid Electric

Making future vehicles intelligent with improved fuel economy and satisfactory emissions are the main drivers for current vehicle research and development. The connected and autonomous vehicles still need years or decades to be widely used in practice. However, some advanced technologies have been developed and deployed for the conventional vehicles to improve the vehicle performance and safety, such as adaptive cruise control (ACC), automatic parking, automatic lane keeping, active safety, super cruise, and so on. On the other hand, the vehicle propulsion system technologies, such as clean and high efficiency combustion, hybrid electric vehicle (HEV), and electric vehicle, are continuously advancing to improve fuel economy with satisfactory emissions for traditional internal combustion engine powered and hybrid electric vehicles or to increase cruise range for electric vehicles.

Sign in / Sign up

Export Citation Format

Share Document