Effect of Fiber-Reinforced Polymer Wrapping on Concrete Chloride Penetration and Concrete Cover

2014 ◽  
Vol 2441 (1) ◽  
pp. 98-104 ◽  
Author(s):  
Nur Yazdani ◽  
Gunther G. Garcia
Keyword(s):  
Concrete Cover ◽  
Chloride Penetration ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Polymer Wrapping

Thermal effect on fiber reinforced polymer reinforced concrete slabs

2008 ◽  
Vol 35 (3) ◽  
pp. 312-320 ◽  
Author(s):  
A. Zaidi ◽  
R. Masmoudi
Keyword(s):  
Thermal Effect ◽  
Concrete Cover ◽  
Fiber Reinforced Polymer ◽  
Concrete Slabs ◽  
Fiber Reinforced ◽  
Reinforced Concrete Slabs ◽  
Reinforced Polymer ◽  
Frp Bar ◽  
Frp Bars ◽  
Concrete Interface

The difference between the transverse coefficients of thermal expansion of fiber reinforced polymer (FRP) bars and concrete generates radial pressure at the FRP bar – concrete interface, which induces tensile stresses within the concrete under temperature increase and, eventually, failure of the concrete cover if the confining action of concrete is insufficient. This paper presents the results of an experimental study to investigate the thermal effect on the behaviour of FRP bars and concrete cover, using concrete slab specimens reinforced with glass FRP bars and subjected to thermal loading from –30 to +80 °C. The experimental results show that failure of concrete cover was produced at temperatures varying between +50 and +60 °C for slabs having a ratio of concrete cover thickness to FRP bar diameter (c/db) less than or equal to 1.4. A ratio of c/db greater than or equal to 1.6 seems to be sufficient to avoid splitting failure of concrete cover for concrete slabs subjected to high temperatures up to +80 °C. Also, the first cracks appear in concrete at the FRP bar – concrete interface at temperatures around +40 °C. Comparison between experimental and analytical results in terms of thermal loads and thermal strains is presented.

Compressive behavior of circular and square concrete column externally confined by different types of basalt fiber–reinforced polymer

2020 ◽  
Vol 23 (8) ◽  
pp. 1534-1547 ◽  
Author(s):  
Jingting Huang ◽  
Tao Li ◽  
Dayong Zhu ◽  
Peng Gao ◽  
An Zhou
Keyword(s):  
Basalt Fiber ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced Polymers ◽  
Test Results ◽  
Fiber Reinforced ◽  
Compressive Behavior ◽  
Reinforced Polymers ◽  
Reinforced Polymer ◽  
Polymer Wrapping ◽  
Basalt Fiber Reinforced Polymer

This article studies the compressive behavior of concrete columns confined by different basalt fiber–reinforced polymers. A total of 30 columns were divided into 10 groups according to section shapes (circular and square), basalt fiber–reinforced polymer types (unidirectional basalt fiber–reinforced polymer, bidirectional basalt fiber–reinforced polymer, and hybrid basalt fiber–reinforced polymer/carbon fiber–reinforced polymers), and number of layers (0, 1, and 2). The test results showed that the compressive strengths of confined specimens increased by 20%–71% for circular columns and by 23%–41% for square columns. Similarly, the ultimate strains improved by 49%–296% for circular specimens and by 45%–145% for square specimens. The two-layer basalt fiber–reinforced polymer jacket had the best confinement effect, whereas the confining effect of bidirectional basalt fiber–reinforced polymer wrapping was relatively lower than that of unidirectional basalt fiber–reinforced polymer wrapping. Moreover, both the strength and ultimate strain of confined concrete improved with increasing number of basalt fiber–reinforced polymer layers. Finite element numerical models were also developed and verified by experimental results, and then the stress distributions of basalt fiber–reinforced polymer jackets and cross-sectional concrete were presented. Based on the test results and experimental data from several existing studies, modified strength and ultimate strain models were further developed for basalt fiber–reinforced polymer-confined circular and square columns.

Sign in / Sign up

Export Citation Format

Share Document