Nanoengineering Ultra-High-Performance Concrete with Multiwalled Carbon Nanotubes

2010 ◽  
Vol 2142 (1) ◽  
pp. 119-126 ◽  
Author(s):  
Kay Wille ◽  
Kenneth J. Loh
Keyword(s):  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
High Performance ◽  
High Performance Concrete ◽  
Ultra High Performance Concrete ◽  
Multiwalled Carbon

scholarly journals Rheological Properties of Cement Pastes with Multiwalled Carbon Nanotubes

2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
Gintautas Skripkiunas ◽  
Ekaterina Karpova ◽  
Irmantas Barauskas ◽  
Joana Bendoraitiene ◽  
Grigory Yakovlev
Keyword(s):  
Carbon Nanotubes ◽  
Rheological Properties ◽  
Yield Stress ◽  
Multiwalled Carbon Nanotubes ◽  
High Performance ◽  
High Performance Concrete ◽  
Plastic Viscosity ◽  
Multiwalled Carbon ◽  
Cement Pastes ◽  
Rheological Test

The evaluation of rheological properties of cement systems is getting more relevant with growing interest to self-consolidating concrete (SCC), high-performance concrete (HPC) and ultrahigh-performance concrete (UHPC). The rheology models are a perspective tool to predict and manage the properties of cement systems in the fresh and hardened state. The current research is focused on the rheological test of cement systems modified by multiwalled carbon nanotubes (MWCNT) dispersion with and without polycarboxylate ether (PCE). The content of dispersion with 1% concentration of MWCNT in cement pastes varied from 0.125 to 0.5% by weight of cement. The dosage of PCE was taken as 0.6% by weight of cement. The cement pastes were prepared based on Portland cement without mineral additives. The rheological test was carried out at 5, 30, 60, and 120 min after mixing of cement paste. The rheological test established that modification of cement pastes by MWCNT dispersion in dosage 0.25% leads to the decrease of yield stress by 30.7% and increase of plastic viscosity by 29.6%. The combined modification by PCE and MWCNT dispersion shows the decrease in plastic viscosity of cement pastes by 9.90% in dosage of MWCNT equal to 0.5% by weight of cement, reduction of water demand by 20% for the same workability, and decrease of yield stress till 0 Pa. It gives the ability to obtain the self-compacting mixtures. The cement pastes with and without MWCNT dispersion revealed the shear-thinning behavior during 120 min after mixing. The modification of cement pastes by PCE with and without MWCNT dispersion showed the shear-thickening behavior which remains during 120 min after mixing.

scholarly journals Investigating the influence of multi-walled carbon nanotubes on the mechanical and damping properties of ultra-high performance concrete

2020 ◽  
Vol 27 (1) ◽  
pp. 433-444
Author(s):  
Wenhua Zhang ◽  
Weizhao Zeng ◽  
Yunsheng Zhang ◽  
Fenghao Yang ◽  
Peipei Wu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
High Performance ◽  
High Performance Concrete ◽  
Damping Properties ◽  
Ultra High Performance Concrete ◽  
Multiwalled Carbon ◽  
Damping Property ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

AbstractIn this paper, the effects of multiwalled carbon nanotubes (MWCNTs) on the mechanical and damping properties of ultra-high performance concrete (UHPC) were investigated. The results show that the proper amount of MWCNTs can improve mechanical properties as well as the damping properties. For the mechanical properties, the compressive strength and flexural strength of the specimens increased with the increase of MWCNTs content in the range of 0~0.05% (mass ratio to cement). However, when the content of MWCNTs was more than 0.05wt.%, the mechanical properties of UHPC could not be improved continually because too many MWCNTs were difficult to disperse and agglomerated easily in UHPC. Similar laws also have been found for the damping property of UHPC. The loss factor of UHPC increased with the increase of MWCNTs content in the range of 0 ~ 0.05%. The incorporation of MWCNTs would introduce a large number of interfaces into UHPC, the friction and slip between interfaces were the main reasons for the improvement of the damping property of UHPC. However, when the content of MWCNTs was more than 0.05%, it was difficult to disperse effectively. As a result, the overall energy consumption efficiency of MWCNTs was decreased.

Fabrication of high-performance composite electrodes composed of multiwalled carbon nanotubes and glycerol-doped poly(3,4-ethylenedioxythiophene):polystyrene sulfonate for use in organic devices

2015 ◽  
Vol 3 (28) ◽  
pp. 7325-7335 ◽  
Author(s):  
Dong-Jin Yun ◽  
Yong Jin Jeong ◽  
Hyemin Ra ◽  
Jung-Min Kim ◽  
Tae Kyu An ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
High Performance ◽  
Composite Electrode ◽  
Composite Electrodes ◽  
Polystyrene Sulfonate ◽  
Multiwalled Carbon ◽  
High Performance Composite ◽  
Organic Devices

The organic doping facilitates the high performance of MWCNT/PEDOT:PSS composite electrode in organic devices.

Sign in / Sign up

Export Citation Format

Share Document