Using Dynamic Modulus Test to Evaluate Moisture Susceptibility of Asphalt Mixtures

2009 ◽  
Vol 2127 (1) ◽  
pp. 29-35 ◽  
Author(s):  
Atish A. Nadkarni ◽  
Kamil E. Kaloush ◽  
Waleed A. Zeiada ◽  
Krishna Prapoorna Biligiri
Keyword(s):  
Dynamic Modulus ◽  
Asphalt Mixtures ◽  
Moisture Susceptibility ◽  
Dynamic Modulus Test

Characteristic Analysis of Dynamic Modulus for High Modulus Asphalt Concrete

2014 ◽  
Vol 505-506 ◽  
pp. 15-18 ◽  
Author(s):  
Xiao Long Zou ◽  
Ai Min Sha ◽  
Wei Jiang ◽  
Xin Yan Huang
Keyword(s):  
Dynamic Modulus ◽  
Testing Machine ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
High Modulus ◽  
Characteristic Analysis ◽  
Modified Asphalt ◽  
Universal Testing ◽  
Different Temperatures ◽  
Dynamic Modulus Test

In order to analyze the characteristics of high modulus asphalt mixture dynamic modulus, Universal Testing Machine (UTM-25) was used for dynamic modulus test of three kinds of mixtures, which were PR Module modified asphalt mixture and PR PLAST.S modified asphalt mixture and virgin asphalt mixture, to investigate dynamic modulus and phase angle at different temperatures and frequencies. The results indicate that: the dynamic modulus order of the three asphalt mixtures is PR MODULE > PR PLAST.S > Virgin. PR MODULE asphalt mixture dynamic modulus is much larger than the other two.

scholarly journals Comparative Study on Complex Modulus and Dynamic Modulus of High-Modulus Asphalt Mixture

Coatings ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1502
Author(s):  
Licheng Guo ◽  
Qinsheng Xu ◽  
Guodong Zeng ◽  
Wenjuan Wu ◽  
Min Zhou ◽  
...  
Keyword(s):  
Dynamic Modulus ◽  
Complex Modulus ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Design System ◽  
High Modulus ◽  
Stiffness Modulus ◽  
Two Systems ◽  
Value Range ◽  
Dynamic Modulus Test

In the French high-modulus asphalt mixture design system, the complex modulus of the mixture under the conditions of 15 °C and 10 Hz is taken as the design index. However, in China, the dynamic modulus under the conditions of 15 °C, 10 Hz, 20 °C, 10 Hz and 45 °C, 10 Hz was taken as the stiffness modulus index of high-modulus asphalt mixture. The difference in modulus values between the two systems caused the pavement structure layer to be thicker and the construction cost to be higher in China. In order to find out the appropriate modulus value of high-modulus asphalt mixture suitable for China’s modulus parameter conditions to better carry out the reasonable design and evaluation of high-modulus asphalt mixture in China, the modulus of four types of high-modulus asphalt mixtures under the two systems through the two-point bending complex modulus test of the CRT-2PT trapezoidal beam and the SPT uniaxial compression dynamic modulus test were analyzed in this paper. Under the premise of meeting the stiffness modulus index of the French high-modulus asphalt mixture, the relationship conversion models between the dynamic modulus and complex modulus of high-modulus asphalt mixture under different temperatures were established. According to the conversion models, the design evaluation value range of dynamic modulus suitable for China’s condition was recommended. It is recommended that the dynamic modulus of China’s high-modulus asphalt mixture at 15 °C and 10 Hz is not less than 16,000 MPa, the dynamic modulus at 20 °C and 10 Hz is not less than 14,000 MPa, and the dynamic modulus at 45 °C and 10 Hz is not less than 2500 MPa. Five kinds of high-modulus asphalt mixtures used in actual road engineering were tested to verify the reliability of the recommended dynamic modulus values based on the modulus conversion model, and the results are consistent with the recommended value range of the model.

Study on Dynamic Modulus of Waste Plastic Modified Asphalt Mixture Using Waste Plastic Bag Chips

2011 ◽  
Vol 261-263 ◽  
pp. 824-828 ◽  
Author(s):  
Qian Zhang ◽  
Shu Wei Goh ◽  
Zhan Ping You
Keyword(s):  
Phase Angle ◽  
Dynamic Modulus ◽  
Asphalt Mixture ◽  
Control Sample ◽  
Asphalt Mixtures ◽  
Test Results ◽  
Waste Plastic ◽  
Modified Asphalt ◽  
Plastic Bag ◽  
Dynamic Modulus Test

The objective of this study is to investigate the possibility of using waste plastic as an additive to modify asphalt mixtures thereby reducing the waste plastic stream in our environment. High density polyethylene plastic bags obtained from the retail store were shredded into chips and added into asphalt mixtures at the rate of 0% (control sample), 2, 5 and 8% based on binder weight. Three different temperatures of 4, 21.3 and 39.2°C and frequencies ranging from 0.1 to 25 Hz were used in the dynamic modulus test. It was found that most of the asphalt mixtures modified with waste plastic have higher dynamic modulus when compared with the control samples. However, no significant trend on phase angle was found among all the samples tested based on the test results. In this study, it was found that the modified asphalt mixture with 2% waste plastic had the highest dynamic modulus and phase angle. Based on the test results, it was found that plastic modified asphalt mixture will have a better performance under intermediate and high temperature conditions.

scholarly journals Cold In-Place Recycling Asphalt Mixtures: Laboratory Performance and Preliminary M-E Design Analysis

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2036
Author(s):  
Dongzhao Jin ◽  
Dongdong Ge ◽  
Siyu Chen ◽  
Tiankai Che ◽  
Hongfu Liu ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Dynamic Modulus ◽  
Asphalt Pavement ◽  
Asphalt Binder ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Emulsion ◽  
Moisture Susceptibility ◽  
Low Temperature Cracking

Cold in-place recycling (CIR) asphalt mixtures are an attractive eco-friendly method for rehabilitating asphalt pavement. However, the on-site CIR asphalt mixture generally has a high air void because of the moisture content during construction, and the moisture susceptibility is vital for estimating the road service life. Therefore, the main purpose of this research is to characterize the effect of moisture on the high-temperature and low-temperature performance of a CIR asphalt mixture to predict CIR pavement distress based on a mechanistic–empirical (M-E) pavement design. Moisture conditioning was simulated by the moisture-induced stress tester (MIST). The moisture susceptibility performance of the CIR asphalt mixture (pre-mist and post-mist) was estimated by a dynamic modulus test and a disk-shaped compact tension (DCT) test. In addition, the standard solvent extraction test was used to obtain the reclaimed asphalt pavement (RAP) and CIR asphalt. Asphalt binder performance, including higher temperature and medium temperature performance, was evaluated by dynamic shear rheometer (DSR) equipment and low-temperature properties were estimated by the asphalt binder cracking device (ABCD). Then the predicted pavement distresses were estimated based on the pavement M-E design method. The experimental results revealed that (1) DCT and dynamic modulus tests are sensitive to moisture conditioning. The dynamic modulus decreased by 13% to 43% at various temperatures and frequencies, and the low-temperature cracking energy decreased by 20%. (2) RAP asphalt incorporated with asphalt emulsion decreased the high-temperature rutting resistance but improved the low-temperature anti-cracking and the fatigue life. The M-E design results showed that the RAP incorporated with asphalt emulsion reduced the international roughness index (IRI) and AC bottom-up fatigue predictions, while increasing the total rutting and AC rutting predictions. The moisture damage in the CIR pavement layer also did not significantly affect the predicted distress with low traffic volume. In summary, the implementation of CIR technology in the project improved low-temperature cracking and fatigue performance in the asphalt pavement. Meanwhile, the moisture damage of the CIR asphalt mixture accelerated high-temperature rutting and low-temperature cracking, but it may be acceptable when used for low-volume roads.

scholarly journals Rutting Performance of Semi-Rigid Base Pavement in RIOHTrack and Laboratory Evaluation

2021 ◽  
Vol 7 ◽  
Author(s):  
Sheng Li ◽  
Mengmeng Fan ◽  
Lukai Xu ◽  
Wendi Tian ◽  
Huanan Yu ◽  
...  
Keyword(s):  
Dynamic Modulus ◽  
Asphalt Pavement ◽  
Asphalt Mixtures ◽  
Rigid Base ◽  
Test Results ◽  
Full Scale Test ◽  
Rutting Resistance ◽  
Test Track ◽  
Dynamic Modulus Test ◽  
Scale Test

Through a simple performance dynamic modulus test (SPT), standard rutting test, Hamburg rutting test, French rutting test and asphalt pavement analyzer rutting test, the rutting resistance of asphalt mixtures in the middle and lower courses of three semi-rigid base asphalt pavement of Beijing full-scale test track road in China was evaluated. The test results show that the rutting resistance of asphalt mixtures of the middle and lower courses can be greatly improved by using low-grade asphalt, especially 30# asphalt. The rutting resistance of SBS modified asphalt mixtures is also better. The SPT dynamic modulus test can indirectly characterize the rutting performance of the asphalt mixture. The rutting test results of a laser road detection vehicle and 3 m ruler show that the asphalt grade has a significant impact on the rutting performance of semi-rigid base asphalt pavement. Compared with 70# asphalt used in the middle and lower courses, the rutting resistance of the pavement structure can be improved by more than 20%. The result also show that the APA rutting test results can closely characterize the full-scale test track results, which is an optimal test method for evaluating the rutting performance of semi-rigid base asphalt pavement. The research results can provide a theoretical basis and reference for the rational design and rutting evaluation of semi-rigid base asphalt pavement.

Laboratory-Measured Dynamic Modulus and Predicted Performance of Asphalt Mixtures

2015 ◽  
Vol 2507 (1) ◽  
pp. 78-89
Author(s):  
Samuel B. Cooper ◽  
Louay N. Mohammad ◽  
Mostafa A. Elseifi ◽  
Amar Raghavendra
Keyword(s):  
Performance Prediction ◽  
Dynamic Modulus ◽  
Axial Loading ◽  
Fatigue Cracking ◽  
Asphalt Mixtures ◽  
Experimental Program ◽  
Dynamic Moduli ◽  
Loading Mode ◽  
Dynamic Modulus Test ◽  
Pavement Performance Prediction

The dynamic modulus testing of asphalt mixtures is typically conducted by using a specimen 100 mm in diameter and 150 mm tall loaded along its primary axis (axial mode). This specimen orientation can present problems when as-built pavement layers, which are seldom constructed in 150-mm lifts, are evaluated. For this issue to be addressed, dynamic modulus testing in the indirect tension (IDT) loading mode was proposed. The objective of this study was to evaluate the influence of loading mode (axial versus IDT) on the measured dynamic modulus and the effects of the measured difference on pavement performance prediction. For the achievement of these objectives, Superpave® mixtures were collected from Florida, Iowa, Louisiana, Michigan, Minnesota, South Dakota, Virginia, and Wisconsin and were evaluated for the effects of loading mode. Results of the experimental program showed that statistical differences exist between IDT and uniaxial dynamic modulus values measured at different temperatures and frequencies. When the precision of the dynamic modulus test was considered, differences attributable to the loading mode (IDT versus axial) were observed for measurements conducted at all temperatures, with the dynamic moduli measured in the axial loading mode being stiffer than the dynamic moduli measured in the IDT loading mode. Results also showed that performance prediction was significantly affected by the loading mode. Predicted rutting and fatigue cracking in the asphalt layer were the most influenced distresses. Correlation factors were developed to correlate one set of dynamic moduli to the moduli measured in a different loading mode.

Dynamic Modulus Characteristic of Large Stone Permeable Asphalt Mixtures

2013 ◽  
Vol 423-426 ◽  
pp. 1110-1113
Author(s):  
Jin Cheng Wei ◽  
Jin Li
Keyword(s):  
Phase Angle ◽  
Dynamic Modulus ◽  
Asphalt Mixtures ◽  
Sigmoidal Function ◽  
Master Curves ◽  
Low Frequencies ◽  
High Frequencies ◽  
Modified Asphalt ◽  
Large Stone ◽  
Dynamic Modulus Test

To study the dynamic modulus characteristic of LSPM mixes, dynamic modulus test was conducted for Large Stone Permeable Asphalt Mixtures (LSPM ) with neat asphalt and with modified asphalt and the range of dynamic modulus values for LSPM was determined and the dynamic modulus master curves were developed. The magnitude of the dynamic modulus decreased with an increase in temperature and increased with an increase in the frequency. The phase angle decreased as the frequency increased at low temperature. With temperature increase, there was a transition interval, where the phase angle increased up to frequencies of 0.5 Hz, and then it started to decrease as frequency increased. After the transition interval, the phase angle increased with an increase in frequency. Master curves developed by sigmoidal function showed that LSPM with modified asphalt exhibited higher dynamic modulus values at middle and high frequencies and lower dynamic modulus values at low frequencies.

Evaluation of Moisture and Ageing Effects on Calcium Carbonite Nanoparticles Modified Asphalt Mixtures

2018 ◽  
Vol 34 ◽  
pp. 40-47 ◽  
Author(s):  
Shaban Ismael Albrka Ali ◽  
Riyadh Abdulwahid ◽  
Muhamed Laith Eidan ◽  
Nur Izzi Md Yusoff
Keyword(s):  
Tensile Strength ◽  
Dynamic Modulus ◽  
Resilient Modulus ◽  
Asphalt Mixture ◽  
Indirect Tensile Strength ◽  
Traffic Load ◽  
Moisture Susceptibility ◽  
Modified Asphalt ◽  
Dynamic Modulus Test ◽  
Indirect Tensile

Flexible pavements deteriorate and crack with time due to the frequent traffic load imposed upon it. Many studies have been done to predict the effects of frequent traffic load and environmental conditions on pavements in the effort to find the best pavement design which resist deterioration and ensure longer pavement service time. This study investigates the effect of mixing asphalt with varying percentages of nano calcium carbonate (CaCO3), namely 0, 2, 4, and 6 %. The mixtures were designed based on the Superpave mix design criteria. Investigation was done using several tests, namely resilient modulus, indirect tensile strength, moisture susceptibility, and dynamic modulus tests. Samples were subjected to aging to determine their resilient modulus. The results of the investigation show that resilient modulus and indirect tensile strength increased when higher percentages of nanoparticles were added to asphalt mixture, with improvement of 138 and 48.18% respectively. Modified binders showed up to 17% improvement in moisture susceptibility comparison to base asphalt mixture, while the result of dynamic modulus test showed that the stiffness of modified asphalt increased 76.69%. The investigation also found that adding 6% CaCO3 nanoparticles to asphalt produced modified asphalt with the best performance. In addition, the results show that the modified asphalt with CaCO3 is suitable for hot and humid regions (tropical countries) in the field of highways construction, as the modifier was able to mitigate the influences of high-temperature rutting and moisture damage.

Evaluation of Moisture Susceptibility of Asphalt Mixtures Using Dynamic Modulus

2016 ◽  
Vol 45 (4) ◽  
pp. 20150136 ◽  
Author(s):  
Jaejun Lee ◽  
Sung-Je Moon ◽  
Jeonghyuk Im ◽  
Sunglin Yang
Keyword(s):  
Dynamic Modulus ◽  
Asphalt Mixtures ◽  
Moisture Susceptibility
Sign in / Sign up

Export Citation Format

Share Document