Characterizing Fatigue of Asphalt Binders with Viscoelastic Continuum Damage Mechanics

2009 ◽  
Vol 2126 (1) ◽  
pp. 55-62 ◽  
Author(s):  
Haifang Wen ◽  
Hussain Bahia
Keyword(s):  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Asphalt Binders ◽  
Continuum Damage ◽  
Viscoelastic Continuum Damage

Linking fatigue response of asphalt binders, mastics, and asphalt concrete mixture modified by nano-silica and synthesized polyurethane

2020 ◽  
Vol 30 (1) ◽  
pp. 103-122
Author(s):  
Mana Motamedi ◽  
Gholamali Shafabakhsh ◽  
Mohammad Azadi
Keyword(s):  
Fatigue Life ◽  
Asphalt Concrete ◽  
Damage Mechanics ◽  
Asphalt Binder ◽  
Continuum Damage Mechanics ◽  
Fatigue Performance ◽  
Concrete Mixture ◽  
Asphalt Binders ◽  
Continuum Damage ◽  
Nano Silica

Asphalt concrete is composed of stone, sand, filler, and asphalt binder. Fatigue can be considered as a phenomenon affecting both the binder (asphalt binder or mastic) and the mixture. The purpose of this study was to investigate the fatigue damage response in asphalt binders, mastics, and asphalt concrete mixtures modified with nano-silica and synthesized polyurethane. The continuum damage mechanics method and phenomenological approaches in this study were used to investigate the fatigue performance. Obtained results indicated that the effect of the synthesized polyurethane on improving the fatigue life was far greater than that of nano-silica. The damage process in asphalt binders differed from that in the mastic and asphalt concrete mixture. Damage intensity parameter is an appropriate criterion for evaluating fatigue performance of asphalt binders and mastics. Concerning the fatigue of asphalt concrete mixture, the results of this study indicated a better convergence between the fatigue parameters of mastics and asphalt concrete mixture compared to asphalt binders, especially with increasing aging. Also, there was greater convergence between the fatigue life of the asphalt concrete mixture and asphalt binder and mastics in the method of continuum damage mechanics as compared to the phenomenological approach.

Fatigue Life of the Human Teeth: A Continuum Damage Approach

2019 ◽  
Vol 43 ◽  
pp. 1-19
Author(s):  
Theddeus Tochukwu Akano
Keyword(s):  
Fatigue Life ◽  
Damage Mechanics ◽  
Stress Amplitude ◽  
Continuum Damage Mechanics ◽  
Continuum Damage ◽  
Elastoplastic Model ◽  
Human Teeth ◽  
Proposed Model ◽  
Number Of Cycles ◽  
Cycles To Failure

Normal oral food ingestion processes such as mastication would not have been possible without the teeth. The human teeth are subjected to many cyclic loadings per day. This, in turn, exerts forces on the teeth just like an engineering material undergoing the same cyclic loading. Over a period, there will be the creation of microcracks on the teeth that might not be visible ab initio. The constant formation of these microcracks weakens the teeth structure and foundation that result in its fracture. Therefore, the need to predict the fatigue life for human teeth is essential. In this paper, a continuum damage mechanics (CDM) based model is employed to evaluate the fatigue life of the human teeth. The material characteristic of the teeth is captured within the framework of the elastoplastic model. By applying the damage evolution equivalence, a mathematical formula is developed that describes the fatigue life in terms of the stress amplitude. Existing experimental data served as a guide as to the completeness of the proposed model. Results as a function of age and tubule orientation are presented. The outcomes produced by the current study have substantial agreement with the experimental results when plotted on the same axes. There is a notable difference in the number of cycles to failure as the tubule orientation increases. It is also revealed that the developed model could forecast for any tubule orientation and be adopted for both young and old teeth.

Modelling the asymmetric tension–compression properties of additively manufactured alloys using continuum damage mechanics

2021 ◽  
pp. 146442072110134
Author(s):  
A Nayebi ◽  
H Rokhgireh ◽  
M Araghi ◽  
M Mohammadi
Keyword(s):  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Element Model ◽  
Continuum Damage ◽  
Compression Tests ◽  
Compression Properties ◽  
Mechanics Model ◽  
Stress Components ◽  
Tension And Compression ◽  
Closure Effect

Additively manufactured parts often comprise internal porosities due to the manufacturing process, which needs to be considered in modelling their mechanical behaviour. It was experimentally shown that additively manufactured parts’ tensile and compressive mechanical properties are different for various metallic alloys. In this study, isotropic continuum damage mechanics is used to model additively manufactured alloys’ tension and compression behaviours. Compressive stress components can shrink discontinuities present in additively manufactured alloys. Therefore, the crack closure effect was employed to describe different behaviours during uniaxial tension and compression tests. A finite element model embedded in an ABAQUS’s UMAT format was developed to account for the isotropic continuum damage mechanics model. The numerical results of tension and compression tests were compared with experimental observations for additively manufactured maraging steel, AlSi10Mg and Ti-6Al-4V. Stress–strain curves in tension and compression of these alloys were obtained using the continuum damage mechanics model and compared well with the experimental results.

Creep Life Prediction of Aircraft Turbine Disc Alloy Using Continuum Damage Mechanics

2017 ◽  
Vol 38 (1) ◽  
pp. 25-30
Author(s):  
Yan-Feng Li ◽  
Zhisheng Zhang ◽  
Chenglin Zhang ◽  
Jie Zhou ◽  
Hong-Zhong Huang
Keyword(s):  
Numerical Analysis ◽  
Test Data ◽  
Life Prediction ◽  
Damage Mechanics ◽  
Continuum Damage Mechanics ◽  
Creep Model ◽  
Continuum Damage ◽  
Creep Life ◽  
Creep Life Prediction ◽  
Turbine Disc

Abstract This paper deals with the creep characteristics of the aircraft turbine disc material of nickel-base superalloy GH4169 under high temperature. From the perspective of continuum damage mechanics, a new creep life prediction model is proposed to predict the creep life of metallic materials under both uniaxial and multiaxial stress states. The creep test data of GH4169 under different loading conditions are used to demonstrate the proposed model. Moreover, from the perspective of numerical simulation, the test data with analysis results obtained by using the finite element analysis based on Graham creep model is carried out for comparison. The results show that numerical analysis results are in good agreement with experimental data. By incorporating the numerical analysis and continuum damage mechanics, it provides an effective way to accurately describe the creep damage process of GH4169.

Development of continuum damage in the creep rupture of notched bars

1984 ◽  
Vol 311 (1516) ◽  
pp. 103-129 ◽  
Keyword(s):  
New York ◽  
Damage Mechanics ◽  
Axial Stress ◽  
Numerical Procedure ◽  
Creep Damage ◽  
Continuum Damage Mechanics ◽  
Constant Load ◽  
Creep Rupture ◽  
Continuum Damage ◽  
Discrete Crack

The creep rupture of circumferentially notched, circular tension bars which are subjected to constant load for long periods at constant temperature is studied both experimentally and by using a time-iterative numerical procedure which describes the formation and growth of creep damage as a field quantity. The procedure models the development of failed or cracked regions of material due to the growth and linkage of grain boundary defects. Close agreement is shown between experimental and theoretical values of the representative rupture stress, of the zones of creep damage and of the development of cracks for circular (Bridgman, Studies in large plastic flow and fracture , New York: McGraw-Hill (1952)) and British Standard notched specimens (B.S. no. 3500 (1969)). The minimum section of the circular notch is shown to be subjected to relatively uniform states of multi-axial stress and damage while the B.S. notch is shown to be subjected to non-uniform stress and damage fields in which single cracks grow through relatively undamaged material. The latter situation is shown to be analogous to the growth of a discrete crack in a lightly damaged continuum. The continuum damage mechanics theory presented here is shown to be capable of accurately predicting these extreme types of behaviour.

Sign in / Sign up

Export Citation Format

Share Document