Operating Speed Prediction Models for Horizontal Curves on Rural Four-Lane Highways

2008 ◽  
Vol 2075 (1) ◽  
pp. 1-7 ◽  
Author(s):  
Huafeng Gong ◽  
Nikiforos Stamatiadis
Keyword(s):  
Prediction Models ◽  
Operating Speed ◽  
Horizontal Curves ◽  
Speed Prediction

scholarly journals Speed Models for Motorcycle Riders for Two-lane Rural Roads

2021 ◽  
Vol 17 ◽  
pp. 595-603
Author(s):  
Panagiotis Lemonakis ◽  
George Botzoris ◽  
Athanasios Galanis ◽  
Nikolaos Eliou
Keyword(s):  
Prediction Models ◽  
Flow Speed ◽  
Operating Speed ◽  
Rural Roads ◽  
The Road ◽  
Horizontal Curves ◽  
Road Geometry ◽  
Speed Prediction ◽  
The Subject ◽  
On The Road

The development of operating speed models has been the subject of numerous research studies in the past. Most of them present models that aim to predict free-flow speed in conjunction with the road geometry at the curved road sections considering various geometric parameters e.g., radius, length, preceding tangent, deflection angle. The developed models seldomly take into account the operating speed profiles of motorcycle riders and hence no significant efforts have been put so far to associate the geometric characteristics of a road segment with the speed behavior of motorcycle riders. The dominance of 4-wheel vehicles on the road network led the researchers to focus explicitly on the development of speed prediction models for passenger cars, vans, pickups, and trucks. However, although the motorcycle fleet represents only a small proportion of the total traffic volume motorcycle riders are over-represented in traffic accidents especially those that occur on horizontal curves. Since operating speed has been thoroughly documented as the most significant precipitating factor of vehicular accidents, the study of motorcycle rider's speed behavior approaching horizontal curves is of paramount importance. The subject of the present paper is the development of speed prediction models for motorcycle riders traveling on two-lane rural roads. The model was the result of the execution of field measurements under naturalistic conditions with the use of an instrumented motorcycle conducted by experienced motorcycle riders under different lighting conditions. The implemented methodology to determine the most efficient model evaluates a series of road geometry parameters through a comprehensive literature review excluding those with an insignificant impact to the magnitude of the operating speeds in order to establish simple and handy models.

Operating speed models for two-lane rural roads in Pakistan

2008 ◽  
Vol 35 (5) ◽  
pp. 443-453 ◽  
Author(s):  
Rizwan A. Memon ◽  
G. B. Khaskheli ◽  
A. Sami Qureshi
Keyword(s):  
Global Positioning System ◽  
Prediction Models ◽  
Geometric Design ◽  
Operating Speed ◽  
Rural Roads ◽  
Horizontal Curves ◽  
Measuring Devices ◽  
Global Positioning ◽  
Speed Prediction ◽  
Design Consistency

One of the suitable techniques used to improve safety on roads is to check the consistency of geometric design. The concept of design consistency has emerged worldwide, but no research has been found to date on design consistency in Pakistan. The most common parameter for the evaluation of design consistency is operating speed. Several models have been developed to predict operating speed on two-lane rural roads. However, these models were based on spot speed data collected through traditional speed measuring devices. This study uses continuous speed profile data collected using a vehicle equipped with a VBox (a global positioning system based device). Eleven test sections were selected in two provinces of Pakistan (i.e., Sindh and Balochistan). Driver behavior is also studied in the present research. Models were developed for prediction of operating speed on horizontal curves and on tangents. Validation of the developed models shows compatibility with the experimental data; hence, the developed speed prediction models can be used to evaluate the geometric design consistency of two-lane rural roads in Pakistan.

scholarly journals Evaluation of Horizontal Curve Radius Effect on Driving Speed in Two Lane Rural Road. Pilot Study

2020 ◽  
Vol 15 (4) ◽  
pp. 252-270
Author(s):  
Mindaugas Šeporaitis ◽  
Viktoras Vorobjovas ◽  
Audrius Vaitkus
Keyword(s):  
Pilot Study ◽  
Prediction Models ◽  
Speed Limit ◽  
Operating Speed ◽  
Horizontal Curve ◽  
Design Standards ◽  
Horizontal Curves ◽  
Road Design ◽  
Driving Speed ◽  
Design Speed

This paper presents a case study of driving speed at horizontal curves in the regional road. The literature review of operating speed at horizontal curves in regional roads expresses the difference between design speed and driving speed. Driving speed was measured in ten horizontal curves on regional road No. 2610. Collected data was compared to the design speed, various design standards, and Operating Speed Prediction Models for traffic in low-volume roads. Based on result analysis, was proposed initial adjusted minimum radius of the horizontal curve based on operating speed. It is justified that proposed corrections based on operating speed ensure a credible speed limit effect on road safety. The performed experiment showed different tendencies comparing measured driving speed with permitted and design speeds. It was determined that dependent on specific curved section drivers tend to exceed posted speed limit from 17% to 98% of cases, and from 41% to 100% − the design speed in the horizontal curve. This research led to identifying the limitations of experimental research methodology. These limitations are related to experimental Site selection with different combinations of alignment elements, traffic, and accident data. A pilot study showed significant results and gave essential insights into the full-scale research plan. The results are expected to benefit both other researchers and the organisations responsible for the development and implementation of normative technical documents for road design.

scholarly journals Empirical Speed Behavior on Horizontal Ramp Curves in Interchanges in the Netherlands

2017 ◽  
Vol 2618 (1) ◽  
pp. 38-47 ◽  
Author(s):  
Haneen Farah ◽  
Aries van Beinum ◽  
Winnie Daamen
Keyword(s):  
The Netherlands ◽  
Prediction Models ◽  
Operating Speed ◽  
Trajectory Data ◽  
Design Elements ◽  
The Road ◽  
Road Design ◽  
Speed Prediction ◽  
Design Consistency ◽  
High Level

Several studies in the literature have indicated that interchanges are the most crash-prone areas within the motorway system in number and severity of accidents. The reason is the high level of turbulence as a result of vehicle lane changes and speed variability. To understand the safety consequences of an interchange design (e.g., type of connecting ramps, radii and superelevation of curves, and lane and shoulder widths), an in-depth investigation of driving speed behavior is needed. Such an investigation requires the collection of detailed trajectory data on vehicles on different interchanges. These types of data are rarely available, and as a result, such studies are scarce in the literature. The main objective of this present study was to analyze driver speed behavior on different ramps at interchanges, and to develop an operating speed prediction model as a function of the road design elements. Trajectory data on free-moving vehicles were derived from stabilized video images taken from a camera mounted underneath a helicopter, which hovered over the road areas studied. Data were collected from 29 curves at six freeway–freeway interchanges in the Netherlands. The sample included nine direct connections, 12 semidirect connections, and eight indirect connections. The findings showed that speeds were affected by several road geometric characteristics of the curves, by driver expectancy and design consistency, and by the percentage of trucks in traffic. The operating speed prediction models developed in the study will provide designers with tools to estimate the operating speed during the design process.

Operating Speed Prediction Models for Sustainable Road Safety Management

ICSDC 2011 ◽  
2012 ◽  
Author(s):  
Tommaso Esposito ◽  
Raffaele Mauro ◽  
Francesca Russo ◽  
Gianluca Dell'Acqua
Keyword(s):  
Road Safety ◽  
Prediction Models ◽  
Safety Management ◽  
Operating Speed ◽  
Speed Prediction

scholarly journals OPERATING SPEED PREDICTION MODEL AS A TOOL FOR CONSISTENCY BASED GEOMETRIC DESIGN OF FOUR-LANE DIVIDED HIGHWAYS

Transport ◽  
2019 ◽  
Vol 34 (4) ◽  
pp. 425-436 ◽  
Author(s):  
Gourab Sil ◽  
Avijit Maji ◽  
Suresh Nama ◽  
Akhilesh Kumar Maurya
Keyword(s):  
Prediction Model ◽  
Lateral Position ◽  
Geometric Design ◽  
Operating Speed ◽  
Vehicle Speed ◽  
Horizontal Curve ◽  
Passenger Cars ◽  
Horizontal Curves ◽  
Speed Prediction ◽  
Design Consistency

Researchers have studied two-lane rural highways to predict the operating speed on horizontal curves and correlated it with safety. However, the driving characteristics of four-lane-divided highways are different. Weak lane discipline is observed in these facilities, which influences vehicle speed in adjacent lane or space. So, irrespective of its lane or lateral position, vehicles in four-lane divided highways are considered free flowing only when it maintains the minimum threshold headway from any lead vehicle. Examination of two conditions is proposed to ensure the free flow. Vehicles meeting both conditions, when tracked from the preceding tangent section till the centre of the horizontal curve, are considered as free flowing. The speed data of such free flowing passenger cars at the centre of eighteen horizontal curves on four-lane divided highways is analysed to develop a linear operating speed prediction model. The developed model depends on curve radius and preceding tangent length. The operating speed of passenger car in four-lane divided highways is influenced by horizontal curve of radius 360 m or less. Further, longer tangent would yield higher operating speed at the centre of the curve. Finally, two nomograms are suggested for conventional design, consistency based design and geometric design consistency evaluation of four-lane divided horizontal curves.

scholarly journals Operating Speed Prediction Models for Tangent Segments: A Brief Review

2021 ◽  
Vol 7 (12) ◽  
pp. 2150-2164
Author(s):  
Musab AbuAddous
Keyword(s):  
Prediction Models ◽  
Flow Speed ◽  
Operating Speed ◽  
The Road ◽  
Traffic Characteristics ◽  
Collection Number ◽  
Speed Prediction ◽  
Study Sites ◽  
Straight Segments ◽  
Geometric Elements

This paper provides a review of studies aimed at developing operating speed prediction models for road tangent sections. The review included many studies, conducted in different geographical areas of the world, in terms of road classification, types of vehicles, techniques and devices used in data collection, number of study sites, the principle adopted in extracting the free-flow speed, as well as the topography that the road path passes through and grads of the studied sections. Moreover, this review mentioned the analysis methods adopted in the modeling, and included the model formulas that the researchers have reached in their studies, as it showed all the geometric elements and traffic characteristics that appeared in the models as independent variables. The author has avoided critiquing or evaluating the methodologies of the reviewed research and accordingly this paper has been prepared for documentation only. The author aims primarily to save the effort and time of graduate students and researchers interested in modeling the operating speed on straight segments, as all data and information are arranged in tables and coordinated for this purpose. Doi: 10.28991/cej-2021-03091784 Full Text: PDF

Operating speed prediction models for tangent sections of two-lane rural highways in Oklahoma State

2018 ◽  
Vol 12 (2) ◽  
pp. 130-137
Author(s):  
Avijit Maji ◽  
Dharamveer Singh ◽  
Naman Agrawal ◽  
Musharraf Zaman
Keyword(s):  
Prediction Models ◽  
Operating Speed ◽  
Rural Highways ◽  
Speed Prediction

Operating Speed Models for Tangent Segments on Urban Roads

2017 ◽  
Vol 2618 (1) ◽  
pp. 91-99 ◽  
Author(s):  
Avi Thiessen ◽  
Karim El-Basyouny ◽  
Suliman Gargoum
Keyword(s):  
Prediction Models ◽  
Operating Speed ◽  
Critical Research ◽  
Rural Roads ◽  
Research Issues ◽  
The Road ◽  
Speed Prediction ◽  
Design Consistency ◽  
The Impact ◽  
The City

Information about operating speeds is essential to design better roads, model traffic emissions, and ensure design consistency while efficient and safe operations on roads are maintained. Therefore, understanding how different factors affect operating speeds and developing operating speed prediction models are critical research issues. Many studies have developed such models on rural roads and highways, but only a few studies have considered development of such models on urban roads and fewer still on tangential segments. This present study attempted to address these limitations by developing operating speed models with data from 249 tangential road segments in the city of Edmonton, Alberta, Canada. A generalized linear model was developed with panel data, and the primary aim was to explore the relationships between operating speeds on urban roads and features of the road environment. To study the impact of road elements on different road types, three models were created: one that combined arterial and collector locations, one for arterials only, and one for collector roads only. The results revealed that roads with sidewalks that were farther away from the road and with low object density or tree density were all associated with higher operating speeds. Locations with monolithic walks on both sides of the road had lower operating speeds. Furthermore, operating speeds decreased as access increased, while longer roads had higher operating speeds. One major takeaway was that the elements differed between road classes. The two variables, which stood out in that respect, were medians and bus stops.

Sign in / Sign up

Export Citation Format

Share Document