BÖHLER S692/S693 MICROCLEAN

Alloy Digest ◽  
2017 ◽  
Vol 66 (2) ◽  
Keyword(s):  
Powder Metallurgy ◽  
Physical Properties ◽  
Small Diameter ◽  
Heat Treating ◽  
Powder Metal ◽  
High Carbon ◽  
Low Sulfur ◽  
Machining Characteristics

Abstract Böhler (or Boehler) S692 Microclean is a high sulfur, high carbon PM M4, with higher manganese and 0.22 sulfur for improved machining characteristics, and is available in rounds greater than or equal to 64.16 mm (2.562 in.) diameter. S693 Microclean is the low sulfur version of high carbon PM M4, available in flats and small diameter rounds. PM refers to powder metallurgy. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on surface qualities as well as heat treating and powder metal forms. Filing Code: TS-739. Producer or source: Böhler Edelstahl GmbH & Company KG.

DURATECH PYROVAN HC

Alloy Digest ◽  
2008 ◽  
Vol 57 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Heat Treating ◽  
Powder Metal ◽  
Steel Company ◽  
Specialty Steel

Abstract DuraTech Pyrovan HC is air hardened and has a combination of strength, wear resistance, and toughness for use in blanking and sizing dies. The alloy is made by powder metallurgy. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on heat treating, machining, and powder metal forms. Filing Code: TS-667. Producer or source: Latrobe Specialty Steel Company.

LESCO T-15 PM

Alloy Digest ◽  
1990 ◽  
Vol 39 (8) ◽  
Keyword(s):  
Powder Metallurgy ◽  
Physical Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
High Speed ◽  
Heat Treating ◽  
High Carbon ◽  
Steel Company ◽  
Good Retention ◽  
Hot Hardness

Abstract LESCOT-15 PM is a special purpose tungsten type high-speed tool steel containing cobalt for good retention of hot hardness and high carbon and vanadium for enhanced abrasion resistance. It is produced by powder metallurgy. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-498. Producer or source: Latrobe Steel Company. Originally published August 1989, revised August 1990.

BÖHLER K490 MICROCLEAN

Alloy Digest ◽  
2017 ◽  
Vol 66 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Powder Metallurgy ◽  
North America ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Powder Metal ◽  
High Toughness ◽  
Cold Work Tool Steel

Abstract Böhler (or Boehler) K490 Microclean is a PM cold work tool steel that has a combination of wear resistance and high toughness. It is made by powder metallurgy. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on wear resistance as well as heat treating and powder metal forms. Filing Code: TS-740. Producer or source: Böhler-Uddeholm North America. See also Alloy Digest TS-734, February 2016.

NJZ BRASCO

Alloy Digest ◽  
1975 ◽  
Vol 24 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
New Jersey ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Dimensional Change ◽  
Heat Treating ◽  
Powder Metal ◽  
Cobalt Alloy ◽  
Copper Zinc

Abstract NJZ BRASCO is a powder metallurgy copper-zinc-cobalt alloy designed for use in the as-sintered condition. It provides sintered parts with substantially higher strength and hardness than conventional 70 copper/30 zinc brass P/M parts. Also, it undergoes significantly less dimensional change than 70/30 brass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and powder metal forms. Filing Code: Cu-293. Producer or source: New Jersey Zinc Company.

IN-861

Alloy Digest ◽  
1974 ◽  
Vol 23 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Elemental Powder ◽  
Powder Metal ◽  
International Nickel Company ◽  
Metallurgy Steel

Abstract IN-861 is a mixed elemental powder metallurgy steel designed for use in the as-sintered condition. It achieves its good mechanical properties by hardening during normal cooling in most commercial sintering furnaces. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on heat treating, machining, and powder metal forms. Filing Code: SA-308. Producer or source: International Nickel Company Inc..

BOEHLER S693 MICROCLEAN

Alloy Digest ◽  
2008 ◽  
Vol 57 (11) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Powder Metallurgy ◽  
North America ◽  
Physical Properties ◽  
Heat Treating ◽  
Powder Metal ◽  
Red Hardness

Abstract Boehler (or Böhler) S693 Microclean provides good red hardness, compressive strength, and wear resistance. The powder metallurgy technology imparts excellent toughness and machinability properties to the material. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, machining, and powder metal forms. Filing Code: TS-673. Producer or source: Böhler-Uddeholm North America.

CARPENTER CTS-40CP ALLOY

Alloy Digest ◽  
2010 ◽  
Vol 59 (2) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Powder Metallurgy ◽  
Heat Treating ◽  
Powder Metal ◽  
Maximum Hardness ◽  
High Carbon ◽  
Temperature Performance ◽  
Chromium Stainless Steel

Abstract Carpenter CTS-40CP alloy is a powder metallurgy, high-carbon chromium stainless steel designed to provide stainless properties with maximum hardness. CTS alloys are used for many blade applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and powder metal forms. Filing Code: SS-1055. Producer or source: Carpenter Specialty Alloys.

MICRO-MELT NCORR

Alloy Digest ◽  
2015 ◽  
Vol 64 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Heat Treating ◽  
Powder Metal ◽  
Good Corrosion Resistance ◽  
Technology Corporation ◽  
Carpenter Technology Corporation

Abstract Micro-Melt signifies powder metallurgy. The alloy is nonmagnetic with excellent tensile strength, ductility, and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and powder metal forms. Filing Code: SS-1231. Producer or source: Carpenter Technology Corporation.

CRM TUNGSTEN-35 Re-18 Mo

Alloy Digest ◽  
1971 ◽  
Vol 20 (11) ◽  
Keyword(s):  
High Temperature ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Electrical Contacts ◽  
High Melting ◽  
Powder Metal ◽  
Temperature Performance

Abstract CRM TUNGSTEN-35 Re-18 Mo is a high-melting alloy for applications such as electronic tube components, electrical contacts, nuclear equipment, rocket thrusters, thermocouples and heating elements. All products are produced by powder metallurgy. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, surface treatment, and powder metal forms. Filing Code: W-17. Producer or source: Chase Brass & Copper Company Inc..

BIOBLU 27

Alloy Digest ◽  
2010 ◽  
Vol 59 (4) ◽  
Keyword(s):  
Powder Metallurgy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Hot Isostatic Pressing ◽  
Heat Treating ◽  
Vacuum Induction Melting ◽  
Induction Melting ◽  
Gas Atomization ◽  
Powder Metal ◽  
Mill Product

Abstract BioBlu 27 alloy is a wrought powder metallurgy product produced by vacuum induction melting (VIM) followed by gas atomization and hot isostatic pressing or by VIM plus electroslag remelting (ESR) to produce 100% billets. The finished mill product is supplied in the annealed, hotworked, or warm-worked condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and powder metal forms. Filing Code: CO-119. Producer or source: Carpenter Specialty Alloys.

Sign in / Sign up

Export Citation Format

Share Document