ATI 2003

Alloy Digest ◽  
2021 ◽  
Vol 70 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
High Strength ◽  
Heat Treating ◽  
Attractive Alternative ◽  
Performance Gap ◽  
High Strength Level ◽  
Type 316L ◽  
Increased Strength

Abstract ATI 2003 (UNS S32003) is a molybdenum-enhanced lean duplex stainless steel (LDSS) that was developed to fill the performance gap between type 316L (UNS S31603) and 2205 duplex (UNS S32205) stainless steels. ATI 2003 has reduced alloy content, which makes it less costly than 2205 duplex, yet ATI 2003 retains the high strength level characteristic of duplex grades. Compared to type 316L, ATI 2003 has increased strength, better corrosion resistance, and greater cost stability. These and other factors make ATI 2003 an attractive alternative for a variety of applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1335. Producer or source: ATI.

CRUCIBLE 174 SXR

Alloy Digest ◽  
2009 ◽  
Vol 58 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Stainless Steels ◽  
Precipitation Hardening ◽  
High Strength ◽  
Heat Treating ◽  
Martensitic Stainless Steels ◽  
Excellent Corrosion Resistance

Abstract Crucible 174 SXR is a premium-quality precipitation-hardening stainless steel designed for use as rifle barrels. It is a modification of Crucible’s 17Cr-4Ni that offers substantially improved machinability without sacrificing toughness. Its excellent corrosion resistance approaches that of a 300 series austenitic stainless steel, while its high strength is characteristic of 400 series martensitic stainless steels. At similar hardness levels, Crucible 174 SXR offers greater toughness than either the 410 or 416 stainless steels which are commonly used for rifle barrels. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming and heat treating. Filing Code: SS-1034. Producer or source: Crucible Service Centers.

PROJECT 70/PROJECT 7000 STAINLESS TYPE 316L

Alloy Digest ◽  
1997 ◽  
Vol 46 (7) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stainless Steels ◽  
316L Stainless Steel ◽  
Heat Treating ◽  
Aisi Type ◽  
Type 316L ◽  
Type 316L Stainless Steel

Abstract Project 70 and Project 7000 Type 316L stainless steels are versions of conventional AISI Type 316L stainless steel having improved machinability, and having higher tensile and creep strengths than conventional 18-8 stainless steels. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-515. Producer or source: Carpenter. Originally published November 1990, revised July 1997.

REMANIT 4401

Alloy Digest ◽  
1996 ◽  
Vol 45 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Elevated Temperatures ◽  
Austenitic Stainless Steels ◽  
High Strength ◽  
Heat Treating ◽  
Good Resistance ◽  
Temperature Performance ◽  
Textile Industries

Abstract Remanit 4401 is a chromium-nickel-molybdenum austenitic stainless steel. The molybdenum (2 to 2.5%) gives it resistance to pitting corrosion, more than most of the standard grades of austenitic stainless steels. This extra measure of corrosion resistance makes this grade particularly suitable for uses involving severe corrosive conditions. The alloy has high strength and good resistance to creep at elevated temperatures. Its many applications include the nuclear, chemical, food, paper, and textile industries. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: SS-664. Producer or source: Thyssen Stahl AG.

AK 420 STAINLESS STEEL

Alloy Digest ◽  
2015 ◽  
Vol 64 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Martensitic Stainless Steels ◽  
Good Corrosion Resistance ◽  
Increased Strength

Abstract AK 420 martensitic stainless steel has good corrosion resistance with increased strength over other 400 martensitic stainless steels. The alloy is magnetic. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1212. Producer or source: AK Steel Corporation.

CARPENTER STAINLESS 22Cr-13Ni-5Mn

Alloy Digest ◽  
1978 ◽  
Vol 27 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Cold Work ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Aisi Type ◽  
Cold Worked

Abstract CARPENTER STAINLESS 22Cr-13Ni-5Mn has very good corrosion resistance in combination with high strength. It has better corrosion resistance than AISI Type 316 stainless steel and approximately twice the yield strength. Carpenter 22Cr-13Ni-5Mn can be machined, cold worked and welded using the same equipment and methods used for the conventional AISI 300 series of stainless steels. It is nonmagnetic as annealed and after severe cold work. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-353. Producer or source: Carpenter.

ELEKTRON AZM

Alloy Digest ◽  
1960 ◽  
Vol 9 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Strength Level ◽  
Extrusion Alloy

Abstract ELEKTRON AZM is a magnesium extrusion alloy having a high strength level. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-45. Producer or source: Magnesium Elektron Ltd.

AISI No. 633

Alloy Digest ◽  
1981 ◽  
Vol 30 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Stainless Steels ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Martensitic Stainless Steels ◽  
Steel Mills ◽  
Temperature Performance ◽  
Structural Applications

Abstract AISI No. 633 is a chromium-nickel-molybdenum stainless steel whose properties can be changed by heat treatment. It bridges the gap between the austenitic and martensitic stainless steels; that is, it has some of the properties of each. Its uses include high-strength structural applications, corrosion-resistant springs and knife blades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-389. Producer or source: Stainless steel mills.

AISI TYPE 303 and 303Se

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI Types 303 and 303 Se austenitic chromium nickel stainless steels to which elements have been added to improve machining and non-seizing characteristics. They are the most readily machinable of all the austenitic chromium nickel grades and are suitable for use in automatic screw machines. They are widely used to minimize seizing and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-126. Producer or source: Stainless steel mills.

ARMCO 21-6-9

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Steel Alloy ◽  
Temperature Performance

Abstract Armco 21-6-9 is an austenitic stainless steel alloy designed for use in applications where a combination of high strength and corrosion resistance is desired. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-125. Producer or source: Armco Inc., Eastern Steel Division.

ALZ 316

Alloy Digest ◽  
1999 ◽  
Vol 48 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating

Abstract ALZ 316 is an austenitic stainless steel with good formability, corrosion resistance, toughness, and mechanical properties. It is the basic grade of the stainless steels, containing 2 to 3% molybdenum. After the 304 series, the molybdenum-containing stainless steels are the most widely used austenitic stainless steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-756. Producer or source: ALZ nv.

Sign in / Sign up

Export Citation Format

Share Document