AVESTAPOLARIT LDX 2101

Alloy Digest ◽  
2002 ◽  
Vol 51 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Tensile Properties ◽  
Nickel Content ◽  
Heat Treating ◽  
Structural Materials ◽  
Duplex Steel ◽  
Load Carrying ◽  
Construction Purpose

Abstract AvestaPolarit LDX 2101 is a lean duplex steel for construction purpose. The alloy has low nickel content, but is balanced with manganese and nitrogen. Applications include exposed load-carrying structural materials for bridges as well as rebar for many construction uses. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as heat treating and joining. Filing Code: SS-863. Producer or source: AvestaPolarit AB.

MAGNIFER 8105, 8105 So

Alloy Digest ◽  
2001 ◽  
Vol 50 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Content ◽  
Heat Treating ◽  
Soft Magnetic ◽  
Magnetic Alloys ◽  
Soft Magnetic Alloys ◽  
Recording Heads ◽  
High Nickel

Abstract Magnifer 8105 and 8105 So are soft magnetic alloys with a high nickel content. Typical applications for 8105 are recording heads, while 8105 So has additional applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-575. Producer or source: Krupp VDM GmbH.

NIROSTA 4303

Alloy Digest ◽  
2009 ◽  
Vol 58 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Deep Drawing ◽  
Nickel Content ◽  
Heat Treating

Abstract Nirosta 4303 is a modification of Nirosta 4301 with higher nickel content. It is often used for precision deep-drawing applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1043. Producer or source: ThyssenKrupp Nirosta GmbH.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

INCONEL ALLOY 725

Alloy Digest ◽  
1994 ◽  
Vol 43 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Alloy 625

Abstract INCONEL ALLOY 725 is an age-hardenable alloy that displays high strength along with excellent ductility and toughness. Its corrosion resistance is comparable to alloy 625. Good flattening properties are exhibited in age-hardened tubing. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Ni-445. Producer or source: Inco Alloys International Inc.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

NIROMET 46

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Nickel Iron Alloy ◽  
Glass Seals

Abstract Niromet 46 is a 46% nickel-iron alloy having low and controlled coefficient of expansion. It is recommended for metal-to-glass seals and terminal bands in vitreous enameled resistors. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-39. Producer or source: Wilbur B. Driver Company.

UNS C36000

Alloy Digest ◽  
1988 ◽  
Vol 37 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Speed ◽  
Heat Treating ◽  
Screw Machine ◽  
Trade Names ◽  
Machine Work

Abstract UNS NO. C36000 is a leaded brass suitable for high-speed screw-machine work. It has many uses such as hardware, gears and pinions. Its trade names include free-turning brass, free-cutting yellow brass and high-leaded brass. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-536. Producer or source: Brass mills.

COPPER ALLOY No. 411

Alloy Digest ◽  
1975 ◽  
Vol 24 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Small Addition

Abstract Copper Alloy No. 411 is brass with a small addition of tin. It has good formability, weldability and corrosion resistance and is recommended for such applications as bearings, bushings, jewelry and stamped hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-296. Producer or source: Brass mills.

OM-METAL

Alloy Digest ◽  
1974 ◽  
Vol 23 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Water System ◽  
Heat Treating ◽  
Brass Alloy ◽  
Corrosion Resistant

Abstract OM-METAL is a new, corrosion-resistant brass alloy. It has excellent resistance to dezincification which makes it highly suitable for water-system applications, decorative parts and marine fittings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-279. Producer or source: American Smelting and Refining Company.

Sign in / Sign up

Export Citation Format

Share Document