ALZ 316L

Alloy Digest ◽  
2001 ◽  
Vol 50 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Carbon Content ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Low Carbon ◽  
Aisi Type ◽  
Type 316L ◽  
Severe Type

Abstract ALZ 316L is a Cr-Ni-Mo steel with a very low carbon content (0.030 max). Its general resistance to corrosion is similar to AISI Type 316 but, because of its low carbon content, it has superior resistance to the formation of harmful carbides that contribute to intergranular corrosion. Its molybdenum content gives it greater resistance to pitting and makes the alloy suitable for uses where corrosive conditions are severe. Type 316L is used widely in many industries such as chemical, food, paper, textile, nuclear, and oil. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: SS-838. Producer or source: ALZ nv.

AK STEEL 316L

Alloy Digest ◽  
2003 ◽  
Vol 52 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Carbon Content ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance ◽  
Aisi Type ◽  
Type 316L

Abstract AK Steel Type 316L is a Cr-Ni-Mo steel with a very low carbon content (0.03 max). Its general resistance to corrosion is similar to AISI Type 316 (see Alloy Digest SS-865, October 2002) but, because of its low carbon content, it has superior resistance to the formation of harmful carbides that contribute to intergranular corrosion. Type 316L is used widely in many industries such as chemical, food, paper, textile, nuclear, and oil. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-872. Producer or source: AK Steel Corporation.

EASTERN STAINLESS TYPE 316L

Alloy Digest ◽  
1984 ◽  
Vol 33 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Carbon Content ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Company ◽  
Aisi Type ◽  
Type 316L ◽  
Molybdenum Steel

Abstract EASTERN STAINLESS Type 316L is a chromium-nickel-molybdenum steel with a very low carbon content (0.03 max.) Its general resistance to corrosion is similar to AISI Type 316 but, because of its low carbon content, it has superior resistance to the formation of harmful carbides that contribute to intergranular corrosion. Type 316L is used widely in many industries such as chemical, food, paper, textile, nuclear and oil. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-439. Producer or source: Eastern Stainless Steel Company.

JESSOP TYPE 316L and 316LM

Alloy Digest ◽  
1989 ◽  
Vol 38 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Intergranular Corrosion ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Company ◽  
Type 316L

Abstract JESSOP TYPE 316L is an extra low carbon variation of Jessop TYPE 316 (See Alloy Digest SS-488, August 1987). It is formulated for resistance to intergranular corrosion in welded or stress relieved structures. JESSOP TYPE 316LM is a more highly alloyed modification of 316L (higher molybdenum and nickel contents) with enhanced pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-509. Producer or source: Jessop Steel Company.

AISI TYPE 431

Alloy Digest ◽  
1988 ◽  
Vol 37 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Carbon Content ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Aisi Type ◽  
Type Stainless Steel

Abstract AISI TYPE Stainless Steel is a quench hardenable grade of relatively low carbon content with some added nickel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-88. Producer or source: Stainless steel mills. Originally published May 1959, revised July 1988.

CRONIFER 2522 LCN

Alloy Digest ◽  
1983 ◽  
Vol 32 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Carbon Content ◽  
Heat Treating ◽  
Low Carbon ◽  
Corrosion Rates ◽  
Temperature Performance ◽  
Molybdenum Steel

Abstract CRONIFER 2522 LCN is a fully austenitic chromium-nickel-molybdenum steel with an extremely low carbon content (0.020% maximum). It contains 0.10-0.14% nitrogen. It is outstanding because of its very low corrosion rates in the Huey test. CRONIFER 2522 LCN is recommended especially for those parts of urea plants that are subjected to the most corrosive conditions. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-430. Producer or source: Vereingte Deutsche Metallwerke AG.

CARLSON ALLOY 904L

Alloy Digest ◽  
2002 ◽  
Vol 51 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Carbon Content ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Intergranular Corrosion ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Low Carbon ◽  
Wide Range

Abstract Carlson Alloy 904L is a 21Cr-24Ni-4.5Mo-1.5Cu low-carbon austenitic alloy that resists corrosion in a wide range of both oxidizing and reducing environments. It has good pitting and crevice-corrosion resistance and eliminates stress-corrosion cracking in most common chloride environments. The alloy resists intergranular corrosion in postwelded or stress-relieved conditions because of its very low carbon content. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-844. Producer or source: G.O. Carlson Inc.

J&L 316L

Alloy Digest ◽  
2004 ◽  
Vol 53 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Carbide Precipitation ◽  
Low Carbon ◽  
Type 316L ◽  
Superior Corrosion Resistance ◽  
Specialty Steel

Abstract Type 316L (UNS S31603) is an austenitic chromium-nickel stainless and heat-resisting steel with superior corrosion resistance to other chromium-nickel steels when exposed to many types of chemical corrodents, as well as marine atmospheres. Carbide precipitation as a result of welding in this low carbon version will be minimized, resulting in less susceptibility to intergranular corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-900. Producer or source: J & L Specialty Steel Inc.

AL 439HP

Alloy Digest ◽  
2001 ◽  
Vol 50 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Carbon Content ◽  
Tensile Properties ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Low Carbon ◽  
Alloy Type ◽  
Intergranular Corrosion Resistance

Abstract AL 439HP is similar to the popular alloy Type 439, except for its very low carbon content. The low carbon content of AL 439HP enhances its formability and intergranular corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-829. Producer or source: Allegheny Ludlum Corporation.

VDM LC-NICKEL 99.2

Alloy Digest ◽  
1996 ◽  
Vol 45 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Carbon Content ◽  
Tensile Properties ◽  
Heat Treating ◽  
Alkaline Media ◽  
Excellent Corrosion Resistance

Abstract VDM LC-Nickel 99.2 is unalloyed nickel which offers excellent corrosion resistance in many alkaline media. The metal also has good mechanical, magnetic, and magnetostrictive properties. It has a reduced carbon content to avoid graphitization at temperatures above 570 deg F (300 deg C). This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-502. Producer or source: VDM Technologies Corporation.

AISI 5117

Alloy Digest ◽  
1980 ◽  
Vol 29 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Chromium Steel ◽  
Low Carbon ◽  
Steel Mills ◽  
Medium Strength

Abstract AISI 5117 is a low-carbon, low-chromium steel for carburizing and other uses. It is recommended for carburizing applications where it is sufficient to have a low-hardenability core of medium strength and toughness combined with a hard, wear-resistant carburized case. It is used without carburizing in the as-rolled, annealed, normalized or quenched-and-tempered condition. It is suitable for use in the automotive, farm-machinery and many other industries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-376. Producer or source: Alloy steel mills and foundries.

Sign in / Sign up

Export Citation Format

Share Document