AVESTA POLARIT 430 Ti

Alloy Digest ◽  
2001 ◽  
Vol 50 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Stress Corrosion Cracking ◽  
Chloride Ion ◽  
High Temperature Strength ◽  
Good Resistance ◽  
Aqueous Corrosion ◽  
Resistance To Oxidation ◽  
Aqueous Corrosion Resistance

Abstract Avesta Polarit 430 Ti is a ferritic stainless steel with good high-temperature strength and an optimal weldability and formability. The alloy is not susceptible to chloride-ion stress-corrosion cracking, has good resistance to oxidation, and very good aqueous corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and joining. Filing Code: SS-837. Producer or source: AvestaPolarit AB.

ACI TYPE HA

Alloy Digest ◽  
1974 ◽  
Vol 23 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Oil Refinery ◽  
Good Resistance ◽  
Temperature Performance ◽  
Resistance To Oxidation ◽  
Iron Chromium

Abstract Type HA is an air-hardening iron-chromium-molybdenum alloy containing sufficient chromium to provide good resistance to oxidation at temperatures up to about 1200 F. Castings of type HA alloy are used widely in oil refinery service and in the glass industry. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-301. Producer or source: Stainless steel foundries.

AL 2003

Alloy Digest ◽  
2002 ◽  
Vol 51 (12) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Stress Corrosion Cracking ◽  
Chloride Ion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Phase Balance

Abstract The AL 2003 alloy is a nitrogen-enhanced leaner nickel and molybdenum alloy than the duplex stainless steel AL 2205, but is similar in both phase balance and mechanical properties. Applications include areas where resistance to both general and chloride-ion stress-corrosion cracking is important. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-869. Producer or source: Allegheny Ludlum Corporation.

SANICRO 30

Alloy Digest ◽  
1966 ◽  
Vol 15 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Stress Corrosion Cracking ◽  
Heat Treating ◽  
Good Resistance ◽  
Temperature Performance ◽  
Resistance To Stress

Abstract SANICRO-30 is a vacuum melted chromium-nickel stainless steel having good resistance to stress-corrosion cracking, creep and oxidation. It is recommended for heat treating and petrochemical equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-189. Producer or source: Sandvik.

NICROFER 7216 H

Alloy Digest ◽  
1997 ◽  
Vol 46 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Iron Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Nickel Chromium ◽  
Solution Treated ◽  
Resistance To Oxidation ◽  
Resistance To Stress

Abstract Nicrofer 7216 H is a solution-treated nickel-chromium-iron alloy with good resistance to oxidation, carburization, and nitriding; good resistance to stress-corrosion cracking; and good resistance to dry chlorine and hydrogen chloride. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-520. Producer or source: VDM Technologies Corporation.

NICROFER 7216

Alloy Digest ◽  
1996 ◽  
Vol 45 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Iron Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Nickel Chromium ◽  
Resistance To Oxidation ◽  
Resistance To Stress

Abstract Nicrofer 7216 is a nickel-chromium-iron alloy, with good resistance to oxidation, carburization, and nitriding; good resistance to stress-corrosion cracking; and good resistance to dry chlorine and hydrogen chloride. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-518. Producer or source: VDM Technologies Corporation.

AK STEEL NITRONIC 30

Alloy Digest ◽  
2013 ◽  
Vol 62 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Stainless Steels ◽  
Abrasion Resistance ◽  
Atmospheric Corrosion ◽  
High Strength ◽  
Good Resistance ◽  
Temperature Performance

Abstract AK Steel Nitronic 30 has good wet abrasion resistance, good resistance to aqueous and atmospheric corrosion, high strength, economy, and improved stress-corrosion cracking resistance over common 18-8 stainless steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming and joining. Filing Code: SS-1138. Producer or source: AK Steel Corporation.

CARLSON 330

Alloy Digest ◽  
1992 ◽  
Vol 41 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Temperature Strength ◽  
Corrosion Resistant ◽  
Nickel Chromium ◽  
Resistance To Oxidation ◽  
Chromium Stainless Steel

Abstract Carlson Alloy 330 is a heat and corrosion resistant austenitic nickel chromium stainless steel. It has good high temperature strength combined with resistance to oxidation and carburization. The alloy is popular in the heat treating industry. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: SS-537. Producer or source: G.O. Carlson Inc..

J&L TYPE 309

Alloy Digest ◽  
2003 ◽  
Vol 52 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Good Combination ◽  
Resistance To Oxidation ◽  
Cold Worked ◽  
Specialty Steel

Abstract Type 309 (UNS S30900) is an austenitic chromium-nickel stainless steel widely used for elevated-temperature services. It has a good combination of oxidation resistance and corrosion-resisting properties. The alloy is essentially nonmagnetic when annealed and become slightly magnetic when cold worked. It is intended primarily for high-temperature applications at 816 deg C (1500 deg F) or higher where resistance to oxidation and/or corrosion is required. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-896. Producer or source: J & L Specialty Steel Inc.

AK STEEL 441

Alloy Digest ◽  
2006 ◽  
Vol 55 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Ferritic Stainless Steel ◽  
High Temperature Oxidation ◽  
High Temperature Strength ◽  
Temperature Oxidation ◽  
Temperature Performance

Abstract AK Steel 441 has good high-temperature strength, an equiaxed microstructure, and good high-temperature oxidation resistance. The alloy is a niobium-bearing ferritic stainless steel. This datasheet provides information on composition, hardness, and tensile properties as well as deformation. It also includes information on high temperature performance and corrosion resistance as well as forming and joining. Filing Code: SS-965. Producer or source: AK Steel.

MANIFLEX-FM

Alloy Digest ◽  
1974 ◽  
Vol 23 (2) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Heat Treating ◽  
Combustion Products ◽  
High Temperature Strength ◽  
Automotive Engines ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract MANIFLEX-FM is a free-machining chromium-nickel austenitic stainless steel which offers excellent high-temperature strength and hardness with good corrosion resistance to combustion products. It is widely used exhaust components in automotive engines. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-291. Producer or source: Carpenter.

Sign in / Sign up

Export Citation Format

Share Document