UGIMA 4570, UGIMA 303UX

Alloy Digest ◽  
1998 ◽  
Vol 47 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Melting Point ◽  
Physical Properties ◽  
Heat Treating ◽  
Computer Numerical Control ◽  
Numerical Control ◽  
Cutting Condition ◽  
Cnc Lathe ◽  
Machine Work

Abstract UGIMA 4570 is a resulfurized grade with calcium added. The steelmaking is carefully controlled and produces a composition with low-melting-point oxides, which produce a lubricating effect during machining. Gains in the cutting condition of 30 to 70% are typical on computer numerical control (CNC) lathe or classical machine work. The alloy is similar to UGIMA NSU but contains additional copper. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-713. Producer or source: Ugine-Savoie. Originally published April 1998, revised October 1998.

UGIMA NSU, UGIMA 303

Alloy Digest ◽  
1998 ◽  
Vol 47 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Melting Point ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Computer Numerical Control ◽  
Numerical Control ◽  
Cutting Conditions ◽  
Cnc Lathe ◽  
Machine Work

Abstract UGIMA NSU and UGIMA 303 are the same grades designated differently for the European and North American markets, respectively. They are resulfurized grades with calcium added. Carefully controlled steelmaking results in a composition with oxides that have a low melting point and produce a lubricating effect during machining. Gains in the cutting conditions of 25 to 50% are typical on computer numerical control (CNC) lathe or classical machine work. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-709. Producer or source: Ugine-Savoie. Originally published March 1998, revised September 1998.

UNS C36000

Alloy Digest ◽  
1988 ◽  
Vol 37 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Speed ◽  
Heat Treating ◽  
Screw Machine ◽  
Trade Names ◽  
Machine Work

Abstract UNS NO. C36000 is a leaded brass suitable for high-speed screw-machine work. It has many uses such as hardware, gears and pinions. Its trade names include free-turning brass, free-cutting yellow brass and high-leaded brass. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-536. Producer or source: Brass mills.

CRM MOLYBDENUM-50 RHENIUM

Alloy Digest ◽  
1970 ◽  
Vol 19 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Powder Metallurgy ◽  
Melting Point ◽  
Physical Properties ◽  
Heat Treating ◽  
Electrical Contacts ◽  
High Melting ◽  
High Melting Point ◽  
Temperature Performance

Abstract CRM MOLYBDENUM-50 RHENIUM is a high-melting-point alloy for applications such as electronics tube components, electrical contacts, thermionic converters, thermocouples, heating elements and rocket thrusters. All products are produced by powder metallurgy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mo-11. Producer or source: Chase Brass & Copper Company Inc..

UGIMA 4404, UGIMA 316L

Alloy Digest ◽  
1998 ◽  
Vol 47 (12) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Melting Point ◽  
Physical Properties ◽  
Melting Process ◽  
Heat Treating ◽  
Aisi 316L

Abstract UGIMA 4404 (UGIMA 316L) is identical to UGINE 4404 (AISI 316L) in analysis, corrosion resistance, mechanical properties, and forging and welding ability, but not with respect to machinability. A specific melting process creates inclusions of malleable oxides with a low melting point. The inclusions improve machinability by 20-30% compared with AISI 316L (1.4404) stainless steel. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-735. Producer or source: Ugine-Savoie.

COPPER ALLOY No. 350

Alloy Digest ◽  
1974 ◽  
Vol 23 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Speed ◽  
Heat Treating ◽  
Screw Machine ◽  
Machine Work

Abstract COPPER ALLOY No. 350 is a medium-leaded brass containing 0.8-1.4 lead. Its machinability is 70% of that of free-cutting brass. It is suitable for use in high-speed screw machine work and has many uses such as lock parts, templates, nuts and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-277. Producer or source: Brass mills.

STERLING SILVER

Alloy Digest ◽  
1985 ◽  
Vol 34 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Melting Point ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precious Metals ◽  
Heat Treating ◽  
Industrial Applications ◽  
Standard Grade ◽  
Thermal Conductivities

Abstract Sterling Silver (Silversmiths grade) contains a minimum of 92.50% silver; the standard grade contains a minimum of 92.10% silver. Historically the remainder was unrestricted but copper was (and is) used because it is more desirable, in general, than other metals. Also, copper is a more effective hardener than other metals that have been considered; however, copper lowers the melting point substantially and lowers the electrical and thermal conductivities appreciably. Sterling Silver is used for flat and hollow tableware, various items of jewelry and special industrial applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, and joining. Filing Code: Ag-11. Producer or source: Precious Metals Producers.

TD-NICKEL

Alloy Digest ◽  
1965 ◽  
Vol 14 (7) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Melting Point ◽  
Physical Properties ◽  
Temperature Stability ◽  
Heat Treating ◽  
High Temperature Stability ◽  
Temperature Performance

Abstract TD-NICKEL is a dispersion hardened nickel alloy offering high-temperature stability and useful mechanical properties virtually to the melting point of the base metal. It is easy to fabricate. It is capable of operating for long periods of time at high temperatures without degradation of mechanical properties. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-103. Producer or source: E. I. DuPont de Nemours & Company Inc..

AMPCOLOY 668 Alloy

Alloy Digest ◽  
1964 ◽  
Vol 13 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Hot Working ◽  
High Quality ◽  
Screw Machine ◽  
Machine Work

Abstract Ampcoloy 668 Alloy is a leaded manganese bronze recommended for high quality screw machine work. It is a high strength, free-machining alloy that has good hot working characteristics. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: Cu-140. Producer or source: Ampco Metal Inc..

MUELLER COPPER 1470

Alloy Digest ◽  
1982 ◽  
Vol 31 (7) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Screw Machine ◽  
Resistance Approach ◽  
Machined Parts ◽  
Machining Characteristics ◽  
Machine Work

Abstract MUELLER COPPER 1470 is a high-conductivity copper to which sulfur has been added to provide free-machining characteristics. Thus it is well suited for screw-machine work. Its electrical conductivity and corrosion resistance approach those of copper but it has higher strength and better machinability. Among its many specific applications are plumbing fittings, electrical connectors, screws, cold-heated and machined parts and cold forgings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-440. Producer or source: Mueller Brass Company.

COPPER ALLOY No. 370

Alloy Digest ◽  
1976 ◽  
Vol 25 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Speed ◽  
Heat Treating ◽  
Screw Machine ◽  
Machine Work

Abstract Copper Alloy No. 370 is a medium-leaded brass (formerly known as Free-Cutting Muntz metal) with good machinability. It is suitable for high-speed screw machine work and is used for a wide variety of products such as gears, nuts and washers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-311. Producer or source: Brass mills.

Sign in / Sign up

Export Citation Format

Share Document