NICROFER 3127 LC

Alloy Digest ◽  
1984 ◽  
Vol 33 (6) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Stainless Steel ◽  
Heat Treating ◽  
General Corrosion ◽  
Low Carbon ◽  
Gas Wells ◽  
Good Resistance ◽  
Temperature Performance ◽  
Sour Gas

Abstract NICROFER 3127 LC is a fully austenitic extra-low-carbon stainless steel to which has been added approximately 3% molybdenum and 1% copper. It is characterized by (1) Good resistance to general corrosion, (2) Excellent resistance to pitting, crevice and intergranular corrosion and to stress-corrosion cracking, and (3) Good mechanical properties. Its many uses include equipment for producing phosphoric acid by the wet method, equipment for handling sulfuric acid contaminated with chlorides, handling seawater and use in deep sour gas wells. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-446. Producer or source: Vereingte Deutsche Metallwerke AG.

SANDVIK SAF 2205

Alloy Digest ◽  
1987 ◽  
Vol 36 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
General Corrosion ◽  
Low Carbon ◽  
Temperature Performance ◽  
Resistance To Stress ◽  
Saf 2205

Abstract SANDVIK SAF 2205 is an extra-low carbon, ferritic-austenitic stainless steel. It has high resistance to stress-corrosion cracking; pitting; service and general corrosion. It has roughly twice the yield strength of austenitic stainless grades and it has good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-487. Producer or source: Sandvik.

SANDVIK SAF 2304

Alloy Digest ◽  
1987 ◽  
Vol 36 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Resistance ◽  
Temperature Performance ◽  
Resistance To Stress

Abstract SANDVIK SAF 2304 is a duplex (ferritic-austenitic) stainless steel of extra-low carbon content. Its yield strength is about double that of austenitic stainless steels and it has very good resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-483. Producer or source: Sandvik.

SANDVIK SANICRO 28

Alloy Digest ◽  
1984 ◽  
Vol 33 (3) ◽  
Keyword(s):  
Stainless Steel ◽  
Heat Exchangers ◽  
Heat Treating ◽  
Steel Alloy ◽  
Low Carbon ◽  
Gas Wells ◽  
Temperature Performance ◽  
Sanicro 28 ◽  
Corrosive Environments ◽  
Sour Gas

Abstract SANDVIK Sanicro 28 is an all-purpose low-carbon stainless steel alloy for service in highly corrosive environments. It has exceptionally high resistance to various types of corrosive attack and has good weldability. Among its numerous applications are evaporator tubes in the production of phosphoric acid; down-hole tubulars in deep, sour gas wells; piping and heat-exchanger tubes in sulfuric acid service and seawater cooled heat exchangers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-442. Producer or source: Sandvik. See also Alloy Digest SS-831, September 2001.

ALLVAC 13-8

Alloy Digest ◽  
2002 ◽  
Vol 51 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Precipitation Hardening ◽  
Cold Working ◽  
High Strength ◽  
Heat Treating ◽  
General Corrosion ◽  
Single Treatment ◽  
Good Resistance ◽  
Temperature Performance ◽  
Very High

Abstract Allvac 13-8 has good fabricability and can be age hardened by a single treatment in the range 510-620 deg C (950-1150 deg F). Cold working prior to aging enhances the aging. This martensitic precipitation-hardening stainless steel has very good resistance to general corrosion and stress-corrosion cracking. It develops very high strength and exhibits good transverse ductility and toughness in heavy sections. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-866. Producer or source: Allvac Metals Company.

ALLVAC 13-8 SUPER TOUGH

Alloy Digest ◽  
2003 ◽  
Vol 52 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Precipitation Hardening ◽  
Cold Working ◽  
Charpy Impact ◽  
Heat Treating ◽  
General Corrosion ◽  
Single Treatment ◽  
Good Resistance ◽  
Temperature Performance ◽  
Impact Energies

Abstract Allvac 13-8 Super Tough alloy is a modification of the standard Allvac 13-8 alloy. (See Alloy Digest SS-866, November 2002.) It has good fabricability and can be age hardened by a single treatment in the range 510 to 621 deg C (950 to 1150 deg F). Cold working prior to aging enhances the aging. These properties supplement the superior fracture toughness and Charpy impact energies. This martensitic precipitation-hardening stainless steel has very good resistance to general corrosion and stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-876. Producer or source: Allvac.

ALLEGHENY STAINLESS TYPE 434

Alloy Digest ◽  
1974 ◽  
Vol 23 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Continuous Service ◽  
Oxidation Resistant ◽  
Corrosive Environments

Abstract ALLEGHENY STAINLESS TYPE 434 is a low-carbon ferritic stainless steel with good corrosion resistance to mildly corrosive environments and the atmosphere. It is oxidation resistant at temperatures up to 1600 F for intermittent service and up to 1450-1500 F for continuous service. It is used for automotive trim and other exterior environments. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-292. Producer or source: Allegheny Ludlum Corporation.

CRONIFER 2328

Alloy Digest ◽  
1982 ◽  
Vol 31 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Good Resistance ◽  
High Chromium ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
High Nickel

Abstract CRONIFER 2328 is a titanium-stabilized, high-chromium and high-nickel austenitic stainless steel with additions of molybdenum and copper. It exhibits good corrosion resistance against sulfuric and phosphoric acids. Also, it has good resistance against pitting and stress-corrosion cracking. Cronifer 2328 is used widely in the chemical industry for equipment and for the storage and transportation of various acids and solutions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-411. Producer or source: Vereingte Deutsche Metallwerke AG.

UNILOY 430

Alloy Digest ◽  
1982 ◽  
Vol 31 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Elevated Temperature ◽  
Stainless Steels ◽  
Heat Treating ◽  
Storage Tanks ◽  
Good Resistance ◽  
Temperature Performance ◽  
Temperature Scaling

Abstract UNILOY 430 is a medium-chromium (17%) non-hardening, ferritic stainless steel. Of the AISI 400 series stainless steels, Uniloy 430 most nearly resembles the 18% chromium-8% nickel stainless steels in fabrication and service. It has excellent resistance to corrosion and good resistance to elevated-temperature scaling. Its many uses include architectural trim, nitric acid storage tanks and kitchen appliances. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-408. Producer or source: Cyclops.

AISI TYPE 416 and 416Se

Alloy Digest ◽  
1964 ◽  
Vol 13 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type ◽  
Type Stainless Steel

Abstract AISI Types 416 and 416Se are free-maching grades of the low-carbon chromium type stainless steel. The former contains sulfur while the latter contains selenium to produce the free-cutting characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-162. Producer or source: Stainless steel mills.

OUTOKUMPU MODA 410S/4000

Alloy Digest ◽  
2020 ◽  
Vol 69 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Resistance ◽  
Temperature Performance ◽  
Corrosive Environments

Abstract Outokumpu Moda 410S/4000 is a 13% Cr, ferritic stainless steel that is used in applications requiring good resistance to mildly corrosive environments. It is a low carbon, non-hardening modification of Type 410 stainless steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1329. Producer or source: Outokumpu Oyj.

Sign in / Sign up

Export Citation Format

Share Document