MITTAL DI-FORM 140T, HB T965

Alloy Digest ◽  
2007 ◽  
Vol 56 (4) ◽  
Keyword(s):  
Tensile Strength ◽  
Yield Strength ◽  
Martensite Phase ◽  
Carbon Steels ◽  
Ferrite Phase ◽  
Dual Phase ◽  
Low Carbon ◽  
Dp Steel ◽  
Low Carbon Steels ◽  
Soft Ferrite

Abstract MITTAL DI-FORM 140T and HB T965 are low carbon steels with dual phase manganese and silicon composition. Dual-phase (DP) steel microstructures typically consist of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The dual-phase grades, including those with high tensile strengths of 965 MPa (140 ksi), that are designed for forming (DI-FORM), also have low yield-strength-to-tensile-strength ratios to improve formability. This datasheet provides information on microstructure and tensile properties as well as deformation and fatigue. It also includes information on forming and surface treatment. Filing Code: SA-566. Producer or source: Mittal Steel USA Flat Products.

MITTAL DI-FORM T780, T980

Alloy Digest ◽  
2007 ◽  
Vol 56 (3) ◽  
Keyword(s):  
Tensile Strength ◽  
Automotive Industry ◽  
High Strength ◽  
Martensite Phase ◽  
Carbon Steels ◽  
Ferrite Phase ◽  
Dual Phase ◽  
Low Carbon ◽  
Advanced High Strength Steel ◽  
Soft Ferrite

Abstract MITTAL DI-FORM T780 and T980 alloys are low-carbon steels with a manganese and silicon composition. Dual-phase (DP) steels are one of the important advanced high-strength steel (AHSS) products developed for the automotive industry. Their microstructure typically consists of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The DI-FORM grades exhibit low yield-to-tensile strength ratios and the name corresponds to the tensile strength. This datasheet provides information on forming. Filing Code: SA-563. Producer or source: Mittal Steel USA Flat Products.

MITTAL DI-FORM T700, HF80Y100T

Alloy Digest ◽  
2007 ◽  
Vol 56 (2) ◽  
Keyword(s):  
Automotive Industry ◽  
High Strength ◽  
Martensite Phase ◽  
Carbon Steels ◽  
Ferrite Phase ◽  
Dual Phase ◽  
Low Carbon ◽  
Advanced High Strength Steel ◽  
Dp Steels ◽  
Soft Ferrite

Abstract MITTAL DI-FORM T700 and HF80Y100T are low-carbon steels with a manganese and silicon composition. Dual-phase (DP) steels are one of the important advanced high-strength steel (AHSS) products developed for the automotive industry. Their microstructure typically consists of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The DI-FORM grades exhibit low yield-to-tensile strengths, and the numeric designation in the name corresponds to the tensile strength. This datasheet provides information on microstructure and tensile properties as well as deformation and fatigue. It also includes information on forming. Filing Code: SA-561. Producer or source: Mittal Steel USA Flat Products.

MITTAL DI-FORM T590, T600

Alloy Digest ◽  
2007 ◽  
Vol 56 (1) ◽  
Keyword(s):  
Tensile Strength ◽  
Automotive Industry ◽  
High Strength ◽  
Martensite Phase ◽  
Ferrite Phase ◽  
Dual Phase ◽  
Bend Strength ◽  
Low Carbon ◽  
Advanced High Strength Steel ◽  
Soft Ferrite

Abstract MITTAL DI-FORM T590 and T600 are low-carbon dual-phase steels containing manganese and silicon. Dual-phase (DP) steels are important advanced high-strength steel (AHSS) products developed for the automotive industry. Their microstructure typically consists of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The DI-FORM grades exhibit low yield-to-tensile strength ratios. The numeric designation in the grade name corresponds to the tensile strength in MPa. This datasheet provides information on microstructure, tensile properties, and bend strength as well as fatigue. It also includes information on forming. Filing Code: SA-558. Producer or source: Mittal Steel USA Flat Products.

MITTAL DI-FORM T500

Alloy Digest ◽  
2006 ◽  
Vol 55 (9) ◽  
Keyword(s):  
Tensile Strength ◽  
Automotive Industry ◽  
Dual Phase Steel ◽  
High Strength ◽  
Martensite Phase ◽  
Ferrite Phase ◽  
Dual Phase ◽  
Advanced High Strength Steel ◽  
Automotive Body ◽  
Soft Ferrite

Abstract Mittal Di-Form T500 is a dual-phase steel intended primarily for exposed outer automotive body panels (door, hoods, and fenders). Dual-phase steels are one of the important advanced high-strength steel products developed for the automotive industry. Their microstructure typically consists of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The Di-Form grades exhibit low yield-to-tensile strength ratios and the name corresponds to the tensile strength. This datasheet provides information on tensile properties as well as deformation and fatigue. It also includes information on forming and joining. Filing Code: SA-556. Producer or source: Mittal Steel USA Flat Products.

MITTAL HI FORM HF70Y80T

Alloy Digest ◽  
2006 ◽  
Vol 55 (12) ◽  
Keyword(s):  
Tensile Strength ◽  
Dual Phase Steel ◽  
Martensite Phase ◽  
Ferrite Phase ◽  
High Yield ◽  
Dual Phase ◽  
High Yield Strength ◽  
Steel Microstructure ◽  
Automotive Body ◽  
Soft Ferrite

Abstract MITTAL HI FORM HF 70Y80T is a dual-phase steel with 550 MPa tensile strength used for automotive body structures. The dual-phase steel microstructure typically consists of a soft ferrite phase with dispersed islands of a hard martensite phase. The martensite phase is substantially stronger than the ferrite phase. The dual-phase 550 MPa grades are high yield strength to tensile strength ratio alloys for improved structural behavior. This datasheet provides information on tensile properties as well as deformation. It also includes information on forming. Filing Code: SA-557. Producer or source: Mittal Steel USA Flat Products.

scholarly journals Microstructural Characterization and Corrosion-Resistance Behavior of Dual-Phase Steels Compared to Conventional Rebar

Crystals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1068
Author(s):  
Hany S. Abdo ◽  
Asiful H. Seikh ◽  
Biplab Baran Mandal ◽  
Jabair A. Mohammed ◽  
Sameh A. Ragab ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Galvanic Corrosion ◽  
Microstructural Characterization ◽  
Carbon Steels ◽  
Dual Phase ◽  
Low Carbon ◽  
Dp Steel ◽  
Dp Steels ◽  
Superior Corrosion Resistance ◽  
Corrosive Environments

Dual-phase (DP) steels consist of a ferritic matrix dispersed with some percentage of martensite, which gives the material a good combination of strength and ductility, along with the capacity to absorb energy and enhanced corrosion protection properties. The purpose of this work was to study the microstructural and corrosion behavior (mainly pitting and galvanic corrosion) of DP steel compared with that of conventional rebar. To obtain DP steel, low-carbon steels were heat-treated at 950 °C for 1 h and then intercritically annealed at 771 °C for 75 min, followed by quenching in ice-brine water. The corrosion rates of DP steel and standard rebar were then measured in different pore solutions. Macro- and microhardness tests were performed for both steels. It was found that DP steels exhibited a superior corrosion resistance and strength compared to standard rebar. The reported results show that DP steels are a good candidate for concrete reinforcement, especially in aggressive and corrosive environments.

scholarly journals Change in Yield Strength of Ultra Low Carbon Steels with Cr Addition

2010 ◽  
Vol 96 (4) ◽  
pp. 162-171 ◽  
Author(s):  
Yoshimasa Funakawa ◽  
Takumi Ujiro
Keyword(s):  
Yield Strength ◽  
Carbon Steels ◽  
Low Carbon ◽  
Low Carbon Steels ◽  
Cr Addition

Effect of manganese bands on austenite formation of low carbon steels in dual phase steel manufacture

2020 ◽  
Author(s):  
Bharath Bandi ◽  
Joost van Krevel ◽  
Sukalpan Nandi ◽  
Zulfiqar Husain ◽  
Prakash Srirangam
Keyword(s):  
Dual Phase Steel ◽  
Carbon Steels ◽  
Austenite Formation ◽  
Dual Phase ◽  
Low Carbon ◽  
Low Carbon Steels

Effects of the Morphology and Distribution of Ferrite and Martensite on Mechanical Properties of Dual-Phases Steel

2013 ◽  
Vol 631-632 ◽  
pp. 404-411
Author(s):  
Jia Guo ◽  
Guo Sen Zhu ◽  
Zhi Qiang Yao ◽  
Jie Liu ◽  
Yu Du ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Toughness ◽  
Yield Strength ◽  
Acicular Ferrite ◽  
Dual Phase Steel ◽  
Dual Phase ◽  
Dual Phase Steels ◽  
Dp Steel

The ingots were rolled by 550 mills in laboratory to obtain dual-phase steels. The influence of the morphology and distribution of ferrite and martensite on mechanical properties of dual-phase steel was investigated. The results indicated that some amount of acicular ferrite transformed in DP steel is available for decreasing the size and homogenizing the distribution of martensite in ferrite base. Meanwhile, the values of yield strength, tensile strength and impact toughness increases apparently, the value of elongation decreases to 22.5% .

Sign in / Sign up

Export Citation Format

Share Document