SANDVIK 310/T22

Alloy Digest ◽  
1994 ◽  
Vol 43 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Composite Tube ◽  
Design Load ◽  
Inside Diameter ◽  
Superheater Tube ◽  
310 Stainless Steel ◽  
Outside Diameter ◽  
Load Carrier

Abstract SANDVIK 310/T22 is a composite tube consisting of Type 310 stainless steel for corrosion resistance on the outside diameter and having T22 (21/4 Cr-1Mo) to A213 on the inside diameter to act as the superheater tube and design load carrier. This datasheet provides information on composition. It also includes information on forming and joining. Filing Code: SA-477. Producer or source: Sandvik.

SANDVIK 3R12/4L7

Alloy Digest ◽  
1996 ◽  
Vol 45 (7) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Black Liquor ◽  
Heat Treating ◽  
304L Stainless Steel ◽  
Design Load ◽  
Recovery Boilers ◽  
Major Application ◽  
Outside Diameter

Abstract Sandvik 3R12/4L7 is a composite tube consisting of type 304L stainless steel for corrosion resistance on the outside diameter and having carbon steel (A210 Gr. A1) as the inside component for both water wetted service and the design load. The major application is tubing to handle the corrosive conditions in black liquor recovery boilers. This datasheet provides information on composition, physical properties, microstructure as well as fatigue. It also includes information on forming, heat treating, and joining. Filing Code: SA-482. Producer or source: Sandvik.

NiAl precipitation in Fe-12w/o Cr-5w/o Ni-4w/o Al

1983 ◽  
Vol 41 ◽  
pp. 202-203
Author(s):  
L.E. Murr ◽  
J.S. Dunning ◽  
S. Shankar
Keyword(s):  
Solid Solution ◽  
Stainless Steel ◽  
Stainless Steels ◽  
Alloy Composition ◽  
Chromium Content ◽  
Scale Up ◽  
Optical Metallography ◽  
Property Evaluation ◽  
310 Stainless Steel ◽  
Microstructural Studies

Aluminum additions to conventional 18Cr-8Ni austenitic stainless steel compositions impart excellent resistance to high sulfur environments. However, problems are typically encountered with aluminum additions above about 1% due to embrittlement caused by aluminum in solid solution and the precipitation of NiAl. Consequently, little use has been made of aluminum alloy additions to stainless steels for use in sulfur or H2S environments in the chemical industry, energy conversion or generation, and mineral processing, for example.A research program at the Albany Research Center has concentrated on the development of a wrought alloy composition with as low a chromium content as possible, with the idea of developing a low-chromium substitute for 310 stainless steel (25Cr-20Ni) which is often used in high-sulfur environments. On the basis of workability and microstructural studies involving optical metallography on 100g button ingots soaked at 700°C and air-cooled, a low-alloy composition Fe-12Cr-5Ni-4Al (in wt %) was selected for scale up and property evaluation.

On Corrosion Resistance Of Austenitic Stainless Steel Clad Layer on a Low Alloy Steel

2018 ◽  
Vol 32 (3) ◽  
pp. 20
Author(s):  
Manas Kumar Saha ◽  
Ritesh Hazra ◽  
Ajit Mondal ◽  
Santanu Das
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Alloy Steel ◽  
Low Alloy Steel ◽  
Clad Layer

ACI HW

Alloy Digest ◽  
1957 ◽  
Vol 6 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Cyclic Heating ◽  
Nickel Base Alloy ◽  
Type Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract Type HW is a nickel-base alloy containing chromium and iron. It is austenitic, non-magnetic, and has exceptionally high resistance to corrosion, cyclic heating, and oxidation. It is of the 60 Ni-12Cr type alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-37. Producer or source: Stainless steel foundries. Revised as Alloy Digest Ni-449, April 1994.

UGIMA 4404 HM

Alloy Digest ◽  
2013 ◽  
Vol 62 (9) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Purpose ◽  
Corrosion Resistant

Abstract Ugima 440 HM is a general-purpose, corrosion resistant austenitic stainless steel with added molybdenum (300 series with 2–2.5% Mo). It features improved machinability compared with 4404 or 316L. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1156. Producer or source: Schmolz + Bickenbach USA Inc..

CTS-BD30P ALLOY

Alloy Digest ◽  
2013 ◽  
Vol 62 (8) ◽  
Keyword(s):  
Stainless Steel ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Martensitic Stainless Steel ◽  
Heat Treating ◽  
Powder Metal ◽  
High Concentration ◽  
Vanadium Carbides

Abstract Carpenter CTS-BD30P alloy is a powder metal processed, air-hardening, martensitic stainless steel that offers corrosion resistance comparable with Type 440C stainless, combined with excellent toughness and wear resistance attributed to a high concentration of vanadium carbides. The Carpenter CTS family of alloys is used for many blade applications. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as heat treating and powder metal forms. Filing Code: SS-1154. Producer or source: Carpenter Specialty Alloys.

ATI 441 ALLOY

Alloy Digest ◽  
2013 ◽  
Vol 62 (7) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Exhaust System ◽  
Low Carbon ◽  
Temperature Performance ◽  
System Components ◽  
Low Nitrogen

Abstract ATI 441 is a low-carbon and low-nitrogen ferritic stainless steel with 18 Cr and columbium. The alloy is typically used for exhaust system components. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming. Filing Code: SS-1150. Producer or source: Allegheny Technologies Inc..

ATI 409HP

Alloy Digest ◽  
2013 ◽  
Vol 62 (2) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Carbon Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
Temperature Performance ◽  
End Use ◽  
Oxidation And Corrosion

Abstract ATI 409HP (UNS S40900) ferritic stainless steel was introduced by ATI Allegheny Ludlum to provide improved oxidation and corrosion resistance for automotive exhaust systems in comparison to carbon steel. The alloy was designated "MF-1", indicating its end use: automotive mufflers. The good fabricability of this alloy, combined with its basic corrosion resistance and economy have significantly broadened the utility of ATI 409HP stainless steel. ATI 409HP consists of four grades: UNS S40900, S40910, S40920, and S40930. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, machining, and joining. Filing Code: SS-1135. Producer or source: Allegheny Technologies Inc..

KUBOTA ALLOY HD

Alloy Digest ◽  
2011 ◽  
Vol 60 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Steel Casting ◽  
Casting Alloy

Abstract Kubota Alloy HD (UNS J93005) is a heat-resisting stainless steel casting alloy suitable for long-term service at temperatures up to 1095 deg C (2000 deg F). The nearest wrought equivalent is type 327. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on corrosion resistance as well as casting and joining. Filing Code: SS-1110. Producer or source: Kubota Metal Corporation, Fahramet Division.

ALLEGHENY LUDLUM TYPE 420

Alloy Digest ◽  
2000 ◽  
Vol 49 (8) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Wear And Corrosion ◽  
Wear And Corrosion Resistance ◽  
Chromium Stainless Steel

Abstract Allegheny Ludlum Type 420 is a hardenable, straight-chromium stainless steel with wear and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-801. Producer or source: Allegheny Ludlum Corporation.

Sign in / Sign up

Export Citation Format

Share Document