MARVAC 18 and 18A

Alloy Digest ◽  
1965 ◽  
Vol 14 (3) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Company ◽  
Iron Base ◽  
Carbon Iron

Abstract Marvac 18 and Marvac 18A are vacuum consumable electrode melted low carbon, iron base alloys capable of nominal yield strengths of 250,000 and 280,000 psi respectively, coupled with excellent toughness and ductility. Both of the alloys respond to a managing heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-175. Producer or source: Latrobe Steel Company.

BRUSH ALLOY 10

Alloy Digest ◽  
1968 ◽  
Vol 17 (5) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Age Hardening ◽  
Resistance Welding Electrodes ◽  
Hardening Heat Treatment

Abstract BRUSH Alloy 10 is a low beryllium, cobalt-bearing copper alloy offering an excellent combination of strength, toughness and conductivity due to an age-hardening heat treatment. It is recommended for springs, clutch rings, resistance welding electrodes and tips, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-187. Producer or source: Brush Beryllium Company.

AISI 5117

Alloy Digest ◽  
1980 ◽  
Vol 29 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Chromium Steel ◽  
Low Carbon ◽  
Steel Mills ◽  
Medium Strength

Abstract AISI 5117 is a low-carbon, low-chromium steel for carburizing and other uses. It is recommended for carburizing applications where it is sufficient to have a low-hardenability core of medium strength and toughness combined with a hard, wear-resistant carburized case. It is used without carburizing in the as-rolled, annealed, normalized or quenched-and-tempered condition. It is suitable for use in the automotive, farm-machinery and many other industries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-376. Producer or source: Alloy steel mills and foundries.

SAE 8115

Alloy Digest ◽  
1973 ◽  
Vol 22 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Nickel Chromium ◽  
Steel Mills ◽  
Medium Strength

Abstract SAE 8115 is a low-carbon nickel-chromium-molybdenum carburizing steel recommended for applications where a core of medium strength and toughness combined with a wear-resistant carburized case is sufficient. It has medium hardenability and can be used without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-292. Producer or source: Alloy steel mills and foundries.

NICROFER 7216LC

Alloy Digest ◽  
2001 ◽  
Vol 50 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract Nicrofer 7216LC is a special low-carbon version of Nicrofer 7216 with carbon at 0.0-25 wt.% maximum. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-568. Producer or source: Krupp VDM.

ALLEGHENY METAL 355

Alloy Digest ◽  
1960 ◽  
Vol 9 (12) ◽  
Keyword(s):  
Heat Treatment ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance

Abstract Allegheny Metal 355 is a chromium-nickel-molybdenum stainless steel to bridge the gap between the 300 and 400 series. It can be precipitation hardened by heat treatment. It is best suited for heavy sections. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-112. Producer or source: Allegheny Ludlum Corporation.

JESSOP TYPE 316L and 316LM

Alloy Digest ◽  
1989 ◽  
Vol 38 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Intergranular Corrosion ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Company ◽  
Type 316L

Abstract JESSOP TYPE 316L is an extra low carbon variation of Jessop TYPE 316 (See Alloy Digest SS-488, August 1987). It is formulated for resistance to intergranular corrosion in welded or stress relieved structures. JESSOP TYPE 316LM is a more highly alloyed modification of 316L (higher molybdenum and nickel contents) with enhanced pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-509. Producer or source: Jessop Steel Company.

AWX STEEL

Alloy Digest ◽  
1971 ◽  
Vol 20 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Yield Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Alloy Steel ◽  
Steel Company

Abstract AWX STEEL is a columbium-bearing low-alloy steel supplied at four yield strength levels where excellent formability and good weldability are required and corrosion resistance is not a great factor. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-269. Producer or source: Alan Wood Steel Company.

UNS H47180

Alloy Digest ◽  
1988 ◽  
Vol 37 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
High Hardenability ◽  
Nickel Chromium ◽  
Steel Mills

Abstract UNS No. H47180 is a low-carbon nickel-chromium-molybdenum carburizing steel recommended for applications requiring a strong, tough core combined with a highly wear-resistant carburized case. It has fairly high hardenability and can be used without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-430. Producer or source: Alloy steel mills and foundries.

SANDMEYER 410S (UNS S41008)

Alloy Digest ◽  
2020 ◽  
Vol 69 (7) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Ferritic Stainless Steel ◽  
High Temperatures ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Company

Abstract Sandmeyer 410S (UNS S41008) is a 13% chromium, ferritic stainless steel. It is a low carbon, non-hardening modification of Type 410 stainless steel. This non-hardening characteristic helps prevent cracking when the alloy is exposed to high temperatures or welded. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1322. Producer or source: Sandmeyer Steel Company.

LESCALLOY UT-19 VAC-ARC

Alloy Digest ◽  
1983 ◽  
Vol 32 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Steel Company ◽  
High Hardenability ◽  
Core Hardness ◽  
Ingot Solidification

Abstract LESCALLOY UT-19 VAC-ARC is a premium quality carburizing steel with high hardenability. It is produced by vacuum are remelting (VAR) to provide a preferred ingot solidification and superior microcleanliness. It is used for aircraft gears, pinions and other carburized parts that require a high minimum core hardness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-394. Producer or source: Latrobe Steel Company.

Sign in / Sign up

Export Citation Format

Share Document