BRUSH ALLOY 390

Alloy Digest ◽  
2004 ◽  
Vol 53 (3) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Fracture Toughness ◽  
Thermal Management ◽  
Elevated Temperatures ◽  
Electrical Contact ◽  
High Strength ◽  
Harsh Environments ◽  
Relaxation Resistance ◽  
Temperature Performance ◽  
Higher Power

Abstract Brush Alloy 390 was specifically designed for high-power applications and provides a combination of high strength and high conductivity. Increasing power requirements drive the need for lower conductor resistance to reduce joule heating. This alloy has a high thermal conductivity that is critical to thermal management. Higher power requirements create harsh environments and higher operating temperatures. Alloy 390 provides excellent stress-relaxation resistance at elevated temperatures, which increases electrical contact reliability. This datasheet provides information on composition, physical properties, and elasticity as well as fracture toughness, deformation, and fatigue. It also includes information on high temperature performance. Filing Code: CU-712. Producer or source: Brush Wellman Inc.

WIELAND-K88

Alloy Digest ◽  
2005 ◽  
Vol 54 (12) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Stress Relaxation ◽  
Copper Alloy ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Relaxation Resistance ◽  
Temperature Performance ◽  
Very High

Abstract Wieland K-88 is a copper alloy with very high electrical and thermal conductivity, good strength, and excellent stress relaxation resistance at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CU-738. Producer or source: Wieland Metals Inc.

LESCALLOY 718 VAC-ARC

Alloy Digest ◽  
1965 ◽  
Vol 14 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Precipitation Hardening ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Steel Company ◽  
Temperature Performance ◽  
Nickel Base ◽  
Super Alloy

Abstract LESCALLOY 718 VacArc is a precipitation hardening nickel-base super alloy designed for service at elevated temperatures up to 1300 F where high strength coupled with good ductility and corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-102. Producer or source: Latrobe Steel Company.

CIRCLE LIN

Alloy Digest ◽  
1961 ◽  
Vol 10 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Resistance To Oxidation ◽  
Nickel Base

Abstract CIRCLE LIN is a heat and corrosion resisting cast nickel-base alloy having high strength and resistance to oxidation at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-67. Producer or source: Lebanon Steel Foundry.

PANDEX VAC ARC

Alloy Digest ◽  
1961 ◽  
Vol 10 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Precipitation Hardening ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract PANDEX VAC ARC is a precipitation hardening, austenitic, heat resisting alloy designed for service at elevated temperatures where high strength and good corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-115. Producer or source: Latrobe Steel.

COOPER ALLOY PH-55A

Alloy Digest ◽  
1973 ◽  
Vol 22 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Elevated Temperatures ◽  
Erosion Resistance ◽  
High Hardness ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Wear Properties ◽  
Temperature Performance

Abstract COOPER Alloy PH-55A comprises three grades each of which offers a different combination of corrosion resistance, high hardness, high strength and machinability. They were developed to meet the combined requirements of high corrosion, abrasion and erosion resistance. They maintain their corrosion and wear properties at elevated temperatures (1000 to 1400 F). This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: SS-109. Producer or source: Cooper Alloy Corporation. Originally published November 1960, revised September 1973.

MST 3AL-5CR

Alloy Digest ◽  
1965 ◽  
Vol 14 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Strength Properties ◽  
Temperature Performance ◽  
Plate Forging

Abstract MST 3AL-5CR is a double melted titanium base alloy available in either ingot, bar, rod, plate, forging, or extrusion form. It possesses good creep and high strength properties at room and elevated temperatures to 800 deg. F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-4. Producer or source: Mallory-Sharon Titanium Corporation. Originally published June 1954, revised March 1965.

MST 5Al-2.5 Sn

Alloy Digest ◽  
1959 ◽  
Vol 8 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Titanium Alloy ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract MST 5A1-2.5 Sn is a titanium alloy combining good weldability and high strength at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-21. Producer or source: Mallory-Sharon Metals Company.

JESSOP H46

Alloy Digest ◽  
1957 ◽  
Vol 6 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Type Stainless Steel

Abstract JESSOP H46 is a ferritic type stainless steel having high strength at elevated temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-56. Producer or source: Wm. Jessop & Sons Ltd.

ANVILOY 1150

Alloy Digest ◽  
2000 ◽  
Vol 49 (11) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
High Strength ◽  
High Temperature Strength ◽  
Sintered Alloy ◽  
Bend Strength ◽  
Tool Steels ◽  
Temperature Performance

Abstract Anviloy 1150 is tungsten-bearing sintered alloy of high density and high strength. It is a PM product and one of a series of alloys with densities 50% greater than that of lead. Anviloy 1150 is a material developed specifically for its high-temperature strength and excellent thermal conductivity. It is used to best advantage in place of lower-conductivity, high-temperature tool steels. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as machining and joining. Filing Code: W-16. Producer or source: CMW Inc. Originally published February 1970, revised November 2000.

UNS R54521

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract UNS No. R 54521 is the weldable high-strength titanium-base alloy. It combines high strength at elevated temperatures with excellent welding characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-91. Producer or source: Titanium mills.

Sign in / Sign up

Export Citation Format

Share Document