ANACONDA ALLOY 443

Alloy Digest ◽  
1981 ◽  
Vol 30 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Heat Exchanger ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Resistance ◽  
Brass Alloy ◽  
Good Ductility ◽  
Long Time ◽  
Salt Waters

Abstract ANACONDA Alloy 443 is a brass alloy commonly known as ARSENICAL ADMIRALTY 443 because the addition of nominally 0.04% arsenic greatly inhibits its corrosion by dezincification. It stands up extremely well against corrosion by fresh, brackish or salt waters ranging from slightly acid to slightly alkaline. It also prossesses good resistance to corrosion by waters containing sulfides. It has moderate strength and good ductility. For a long time, this alloy has been considered a standard for condenser and heat-exchanger tubes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-422. Producer or source: Anaconda American Brass Company.

AMBRALOY 687

Alloy Digest ◽  
1970 ◽  
Vol 19 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Heat Exchanger ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Brass Alloy

Abstract AMBRALOY-687 is an aluminum brass alloy containing arsenic as an inhibitor to dezincification. It is recommended for condenser and heat exchanger tubes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-213. Producer or source: Anaconda American Brass Company. See also Alloy Digest Cu-459, June 1983.

COPPER ALLOY No. C51100

Alloy Digest ◽  
1981 ◽  
Vol 30 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Good Ductility ◽  
Bridge Bearing ◽  
Phosphorus Alloy

Abstract Copper Alloy No. C51100 is a copper-tin-phosphorus alloy with relatively high tensile and yield strengths, good ductility and good resistance to corrosion. It can be fabricated by a number of conventional processes. Its many applications include bridge bearing plates, numerous hardware uses such as bellows, clutch disks, fasteners, springs and textile machinery. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-412. Producer or source: Copper and copper alloy mills.

MUELLER ALLOY 2700

Alloy Digest ◽  
1983 ◽  
Vol 32 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Good Resistance ◽  
Brass Alloy ◽  
Medium Strength ◽  
Copper Zinc ◽  
Cold Worked

Abstract MUELLER Alloy 2700 is a medium-strength copper-zinc (brass) alloy with good ductility. It has good resistance to corrosion and excellent cold-working characteristics. It can be cold worked by the conventional fabrication processes. Its many applications include products made from wire for automotive, electrical, architectural and hardware uses. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-456. Producer or source: Mueller Brass Company.

MUELLER ALLOY 2740

Alloy Digest ◽  
1983 ◽  
Vol 32 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Good Resistance ◽  
Brass Alloy ◽  
Medium Strength ◽  
Copper Zinc ◽  
Cold Worked

Abstract MUELLER ALLOY 2740 is a medium-strength copper-zinc (brass) alloy with good ductility and toughness. It has excellent cold-working characteristics and good resistance to corrosion. It can be cold worked by conventional processes and procedures. Mueller Alloy 2740 finds its chief use in plumbing brass goods and trap tube. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-468. Producer or source: Mueller Brass Company.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

OM-METAL

Alloy Digest ◽  
1974 ◽  
Vol 23 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Water System ◽  
Heat Treating ◽  
Brass Alloy ◽  
Corrosion Resistant

Abstract OM-METAL is a new, corrosion-resistant brass alloy. It has excellent resistance to dezincification which makes it highly suitable for water-system applications, decorative parts and marine fittings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-279. Producer or source: American Smelting and Refining Company.

COPPER ALLOY No. C84200

Alloy Digest ◽  
1982 ◽  
Vol 31 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Lead Alloy ◽  
Good Resistance ◽  
Copper Zinc ◽  
Pipe Fittings ◽  
Strength And Ductility

Abstract Copper Alloy No. C84200 is a free-cutting copper-zinc-tin-lead alloy. It is characterized by good casting properties, moderate strength and ductility, good machinability and good resistance to corrosion. Formerly used named (not recommended) are 101, Leaded Semi-Red Brass and 80-5-2.5-12.5. Typical applications are pipe fittings, bushings, locknuts and unions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-446. Producer or source: Copper alloy foundries. See also Alloy Digest Cu-450, December 1982.

COPPER ALLOY No. C93500

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C93500 is a cast bronze containing nominally 9% lead and 5% tin. It has excellent machinability, low strength and good resistance to corrosion. It is used for corrosion-resistant castings, small bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-439. Producer or source: Copper alloy foundries.

ALLVAC AC718

Alloy Digest ◽  
1991 ◽  
Vol 40 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Vacuum Arc ◽  
Vacuum Induction Melting ◽  
Induction Melting ◽  
Good Ductility

Abstract Allvac 718 is produced by vacuum induction melting followed by vacuum arc or electroslag consumable remelting. Th alloy has excellent strength and good ductility up to 1300 F (704 C). It also has excellent cryogenic properties. It has unique welding characteristics. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-394. Producer or source: Allvac Inc..

RA 600

Alloy Digest ◽  
1967 ◽  
Vol 16 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Good Resistance ◽  
Good Oxidation Resistance ◽  
Nickel Base

Abstract RA-600 is a nickel-base chromium alloy having good oxidation resistance to 2150 F, and good resistance to carburizing and nitriding atmospheres. It is recommended for furnace construction and equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-120. Producer or source: Rolled Alloys Inc..

Sign in / Sign up

Export Citation Format

Share Document