AISI 1151

Alloy Digest ◽  
1985 ◽  
Vol 34 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Transverse Direction ◽  
Longitudinal Direction ◽  
Heat Treating ◽  
Automatic Machine ◽  
Steel Mills ◽  
High Production

Abstract AISI 1151 is a resulfurized carbon steel containing nominally 0.85% manganese and a range of 0.08-0.13% sulfur to make it free machining. Its ductility and toughness are reasonably good in the longitudinal direction but are low in the transverse direction. It is recommended highly for high-production automatic machine products. Its uses include axles and shafts, spindles, gears, bolts and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-103. Producer or source: Carbon steel mills.

AISI 1146

Alloy Digest ◽  
1984 ◽  
Vol 33 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Transverse Direction ◽  
Longitudinal Direction ◽  
Heat Treating ◽  
Automatic Machine ◽  
Steel Mills ◽  
High Production ◽  
Ball Joints

Abstract AISI 1146 is a resulfurized carbon steel containing nominally 0.85% manganese and a range of 0.08-0.13% sulfur to make it free machining. It has relatively low hardenability. Its ductility and toughness are fairly good in the longitudinal direction but are low in the transverse direction. It is recommended highly for high-production automatic machine products. Among its many uses are axles and shafts, screws, spindles, ball joints, gears, bolts and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-102. Producer or source: Carbon steel mills.

AISI 1140

Alloy Digest ◽  
1984 ◽  
Vol 33 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Transverse Direction ◽  
Longitudinal Direction ◽  
Heat Treating ◽  
Automatic Machine ◽  
Steel Mills ◽  
Light Duty ◽  
High Production ◽  
Machining Characteristics

Abstract AISI 1140 is resulfurized carbon steel. It contains nominally 0.85% manganese and a range of 0.08-0.13% sulfur to furnish tree machining characteristics. Its hardenability is relatively low. Its ductility and toughness are fairly good in the longitudinal direction but tend to be low in the transverse direction. It is recommended highly for high-production automatic-machine products. Among its many applications are splined shafts, screws, bolts, light-duty gears and tool holders. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-101. Producer or source: Carbon steel mills.

AISI 1141

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Carbon Steel ◽  
Transverse Direction ◽  
Longitudinal Direction ◽  
Heat Treating ◽  
Automatic Machine ◽  
Steel Mills ◽  
Light Duty ◽  
High Production ◽  
Ball Joints ◽  
Machining Characteristics

Abstract AISI 1141 is a resulfurized carbon steel containing nominally 1.50% manganese and 0.08-0.13% sulfur to give it free-machining characteristics. It has relatively low hardenability. Its ductility and toughness are fairly good in the longitudinal direction but tend to be low in the transverse direction. It is highly recommended for high-production automatic-machine products. Among its many uses are screws, bolts, ball joints, spindles and light-duty gears. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-93. Producer or source: Carbon steel mills.

AISI 1132

Alloy Digest ◽  
1973 ◽  
Vol 22 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Manganese Alloy ◽  
Steel Mills ◽  
High Production

Abstract AISI 1132 is a relatively tough, manganese alloy steel characterized by its free-machining qualities. It is recommended especially for high production machine products. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-53. Producer or source: Carbon steel mills.

AISI 1137

Alloy Digest ◽  
1983 ◽  
Vol 32 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Transverse Direction ◽  
Longitudinal Direction ◽  
Heat Treating ◽  
Automatic Machine ◽  
Steel Mills ◽  
High Production ◽  
Tie Rods ◽  
Machining Characteristics

Abstract AISI 1137 is a resulfurized carbon steel containing nominally 1.50% manganese and 0.08-0.13% sulfur to provide free-machining characteristics. It is recommended especially for high-production automatic machine products. AISI 1137 has relatively low hardenability. In the longitudinal direction its ductility and toughness are fairly good but in the transverse direction they tend to be low. Its many uses include spline shafts, mine-car axles and shafts, gears, bolts, tool holders and tie-rods. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-97. Producer or source: Carbon steel mills.

AISI 1144

Alloy Digest ◽  
1983 ◽  
Vol 32 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Transverse Direction ◽  
Longitudinal Direction ◽  
Heat Treating ◽  
Automatic Machine ◽  
Steel Mills ◽  
High Production ◽  
The Many ◽  
Ball Joints

Abstract AISI 1144 is a resulfurized carbon steel containing nominally 1.50% manganese and 0.24-0.33% sulfur to provide a free-machining steel. It is recommended especially for high-production automatic machine products. It has relatively low hardenability. Its ductility and toughness are reasonably good in the longitudinal direction, but they tend to be low in the transverse direction. The many uses of AISI 1144 include mine-car axles and shafts, screws, propeller shafts, ball joints, bushings, bolts and gears. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-98. Producer or source: Carbon steel mills.

AISI 1139

Alloy Digest ◽  
1980 ◽  
Vol 29 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Steel Mills ◽  
High Production ◽  
Machining Characteristics

Abstract AISI 1139 is a carbon steel containing 1.35-1.65% manganese and 0.13-0.20% sulfur to furnish free-machining characteristics. It is recommended especially for high-production machined products. Among its many applications are splined shafts, screws, arbors, tool holders and propeller shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-82. Producer or source: Carbon steel mills.

SAE 1050

Alloy Digest ◽  
1986 ◽  
Vol 35 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Induction Hardening ◽  
Heat Treating ◽  
Steel Mills ◽  
Strength And Toughness

Abstract SAE 1050 is a water- and oil-hardening grade of carbon steel recommended for applications where a shallow-hardening steel of moderate strength and toughness suffices. It is commonly used for parts where induction hardening is employed and may be used in the austempered condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: CS-110. Producer or source: Carbon steel mills.

AISI 1017

Alloy Digest ◽  
1986 ◽  
Vol 35 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Manganese Content ◽  
Heat Treating ◽  
The Core ◽  
Steel Mills ◽  
Cold Workability

Abstract AISI 1017 is a carbon steel with a relatively low manganese content (0.30-0.60%); this contributes to relatively low hardenability in all applications and increased ductility with decreased hardness and strength in the core of carburized material and in uncarburized uses. It combines good hot and cold workability, good machinability and good weldability. Typical applications are carburized parts, bolts, trusses and cold-extruded parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-109. Producer or source: Carbon steel mills.

AISI 1117

Alloy Digest ◽  
1983 ◽  
Vol 32 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Surface Treatment ◽  
Manganese Content ◽  
Heat Treating ◽  
The Core ◽  
Steel Mills ◽  
Wide Range

Abstract AISI 1117 is a resulfurized carbon steel for use where a free-machining carburizing steel is required. Its manganese content (nominally 1.15%) provides some increase in hardenability in all applications and increased hardness and strength in uncarburized uses and in the core of carburized parts. Its applications include a wide range of components of components and parts for machinery and structures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-96. Producer or source: Carbon steel mills.

Sign in / Sign up

Export Citation Format

Share Document