INCONEL ALLOY 783

Alloy Digest ◽  
2004 ◽  
Vol 53 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Iron Alloy ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Nickel Cobalt ◽  
Three Phase ◽  
Cobalt Iron ◽  
Aging Alloy ◽  
Oxidation Resistant ◽  
Clearance Control

Abstract Inconel Alloy 783 is an oxidation resistant, low expansion, nickel-cobalt-iron alloy with other additions. The alloy is a three-phase aging alloy that is of interest for close clearance control components in the aerospace arena. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: CO-95. Producer or source: Special Metals Corporation. Originally published January 1995, revised February 2004.

AMPCOLOY 570

Alloy Digest ◽  
1980 ◽  
Vol 29 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Cast Iron ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Aluminum ◽  
High Quality ◽  
Glass Making ◽  
Temperature Performance ◽  
Wide Range ◽  
Cobalt Iron

Abstract AMPCOLOY 570 is a cast copper-nickel-aluminum-cobalt-iron alloy specially developed for applications involving severe stresses and high temperatures, such as glass-making molds and plate-glass rolls. It is significantly superior to cast iron which has been commonly used for glass-making molds. Good foundry techniques will yield high-quality castings of Ampcoloy 570 in a wide range of section sizes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-392. Producer or source: Ampco Metal Inc..

INCONEL ALLOY 601GC

Alloy Digest ◽  
1992 ◽  
Vol 41 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Fatigue Life ◽  
Low Cycle Fatigue ◽  
Iron Alloy ◽  
Heat Treating ◽  
Cycle Fatigue ◽  
Inconel Alloy ◽  
Grain Sizes ◽  
Nickel Chromium ◽  
Temperature Performance

Abstract INCONEL ALLOY 601GC is a nickel-chromium-iron alloy with additions of aluminum, zirconium, and nitrogen to resist oxidation and micro-alloy, the last to pin the grain boundaries and prevent grain growth at high temperatures. Maintaining finer grain sizes especially helps low cycle fatigue life. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as heat treating and joining. Filing Code: Ni-410. Producer or source: Inco Alloys International Inc..

INCONEL ALLOY 725

Alloy Digest ◽  
1994 ◽  
Vol 43 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Alloy 625

Abstract INCONEL ALLOY 725 is an age-hardenable alloy that displays high strength along with excellent ductility and toughness. Its corrosion resistance is comparable to alloy 625. Good flattening properties are exhibited in age-hardened tubing. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Ni-445. Producer or source: Inco Alloys International Inc.

NIROMET 46

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Nickel Iron ◽  
Nickel Iron Alloy ◽  
Glass Seals

Abstract Niromet 46 is a 46% nickel-iron alloy having low and controlled coefficient of expansion. It is recommended for metal-to-glass seals and terminal bands in vitreous enameled resistors. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Fe-39. Producer or source: Wilbur B. Driver Company.

INVAR

Alloy Digest ◽  
1964 ◽  
Vol 13 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
Temperature Variations ◽  
Nickel Iron ◽  
Dimensional Changes ◽  
Temperature Performance ◽  
Nickel Iron Alloy

Abstract INVAR is a 36% nickel-iron alloy having the lowest coefficient of expansion, recommended for applications requiring no dimensional changes with temperature variations. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-24. Producer or source: Carpenter.

COPPER ALLOY No. 954

Alloy Digest ◽  
1975 ◽  
Vol 24 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Copper Alloy ◽  
Iron Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Good Resistance ◽  
Excellent Corrosion Resistance ◽  
Aluminum Iron ◽  
Copper Aluminum

Abstract Copper Alloy No. 954 is a copper-aluminum-iron alloy characterized by high strength and hardness, good resistance to fatigue and wear, and excellent corrosion resistance. It is suited for service up to 750 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-292. Producer or source: Copper alloy foundries.

INCONEL ALLOY 722

Alloy Digest ◽  
1965 ◽  
Vol 14 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Nickel Base Alloy ◽  
Inconel Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract INCONEL Alloy 722, formerly Inconel W alloy, is a high strength, high-temperature nickel-base alloy responding to age hardening heat treatments for maximum properties. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-100. Producer or source: Huntington Alloy Products Division, An INCO Company.

MAGNIFER 36K

Alloy Digest ◽  
1996 ◽  
Vol 45 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Electrical Resistance ◽  
Iron Alloy ◽  
Heat Treating ◽  
Soft Magnetic ◽  
Nickel Iron ◽  
Saturation Induction ◽  
Nickel Iron Alloy

Abstract Magnifer 36K is a soft-magnetic nickel-iron alloy with 36% nickel. It has a saturation induction of 1.3 T and a rather high electrical resistance of 0.75 ohm mm2/m. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-110. Producer or source: VDM Technologies Corporation.

INCO ALLOY G-3

Alloy Digest ◽  
1986 ◽  
Vol 35 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Stress Corrosion Cracking ◽  
Heat Affected Zone ◽  
Iron Alloy ◽  
Heat Treating ◽  
Minor Elements ◽  
Nickel Chromium ◽  
Inco Alloy

Abstract INCO Alloy G-3 is a nickel-chromium-iron alloy with additions of molybdenum and copper. Some of the minor elements are controlled to provide increased resistance to weld heat-affected zone corrosion. The alloy has exceptional stress-corrosion cracking resistance in chloride-containing environments. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-341. Producer or source: lnco Alloys International.

INCONEL ALLOY 601

Alloy Digest ◽  
1970 ◽  
Vol 19 (4) ◽  
Keyword(s):  
Solid Solution ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Solid Solution Alloy ◽  
Process Industries ◽  
Inconel Alloy ◽  
Nickel Chromium

Abstract INCONEL Alloy 601 is a nickel-chromium solid-solution alloy with excellent high-temperature properties which make it attractive for many application in aerospace and process industries. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-152. Producer or source: Huntington Alloy Products Division, An INCO Company.

Sign in / Sign up

Export Citation Format

Share Document