C-103

Alloy Digest ◽  
2000 ◽  
Vol 49 (11) ◽  
Keyword(s):  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Density Ratio ◽  
High Strength ◽  
Niobium Alloy ◽  
Temperature Performance ◽  
Temperature Applications

Abstract Alloy C-103 is a niobium alloy with a high strength/density ratio for elevated temperature applications. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, machining, and joining. Filing Code: CB-25. Producer or source: ATI Wah Chang, Allegheny Technologies.

CARPENTER VACUMELTROL 41

Alloy Digest ◽  
1973 ◽  
Vol 22 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Range ◽  
Temperature Performance ◽  
Temperature Applications

Abstract CARPENTER VACUMELTROL 41 is a precipitation-hardenable alloy designed for severely stressed high-temperature applications. It possesses high strength in the 1200-1800 F temperature range. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-197. Producer or source: Carpenter.

MAGNESIUM HZ32A

Alloy Digest ◽  
1959 ◽  
Vol 8 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Chemical Company ◽  
Temperature Performance ◽  
Temperature Applications

Abstract MAGNESIUM HZ 32A is a magnesium-base alloy containing thorium, zirconium and zinc. It is recommended for elevated temperature applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Mg-42. Producer or source: Dow Chemical Company, Magnesium Department.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

SILNIC BRONZE

Alloy Digest ◽  
1960 ◽  
Vol 9 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Silicon Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Nickel Silicon

Abstract SILNIC BRONZE is a copper-nickel-silicon alloy having high strength, high conductivity and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-90. Producer or source: Chase Brass & Copper Company Inc..

ACCURATE METAL

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Copper Nickel Alloy

Abstract ACCURATE METAL is a copper-nickel alloy having high strength, ductility and corrosion resistance. It was especially designed for exacting electronic and electrical applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Cu-207. Producer or source: Connecticut Metals Corporation.

FLYLITE ZRE-1

Alloy Digest ◽  
1952 ◽  
Vol 1 (2) ◽  
Keyword(s):  
Compressive Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
Heat Treating ◽  
Jet Engine ◽  
Temperature Performance ◽  
Engine Components ◽  
Temperature Applications

Abstract Flylite ZRE-1 is a creep resistant magnesium-base alloy primarily designed for jet engine components and other high temperature applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as creep. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Mg-2. Producer or source: Howard Foundry Company.

MUELLER ALLOY 6741

Alloy Digest ◽  
1971 ◽  
Vol 20 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Wear Characteristics ◽  
Bearing Strength ◽  
Temperature Performance ◽  
Bearing Alloy

Abstract MUELLER ALLOY No. 6741 (formerly 600 Alloy) is a high-strength bearing alloy intended for use in applications requiring a combination of outstanding wear characteristics and high bearing strength. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-235. Producer or source: Mueller Brass Company.

MONEL ALLOY 502

Alloy Digest ◽  
1970 ◽  
Vol 19 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract MONEL alloy 502, a modification of MONEL alloy K-500, provides improved machinability. It maintains high strength up to about 800 F and has good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-157. Producer or source: Huntington Alloy Products Division.

KUBOTA KNC-03

Alloy Digest ◽  
2010 ◽  
Vol 59 (1) ◽  
Keyword(s):  
Compressive Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Temperature Performance ◽  
Resistance To Oxidation

Abstract Kubota KNC-03 is a grade with a combination of high strength and excellent resistance to oxidation. These properties make this alloy suitable for long-term service at temperature up to 1250 deg C (2282 deg F). This datasheet provides information on physical properties, hardness, elasticity, tensile properties, and compressive strength as well as creep. It also includes information on high temperature performance as well as casting and joining. Filing Code: Ni-676. Producer or source: Kubota Metal Corporation, Fahramet Division. See also Alloy Digest Ni-662, April 2008.

ALUFONT-3

Alloy Digest ◽  
1956 ◽  
Vol 5 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Sand Casting ◽  
Casting Alloy ◽  
Temperature Performance

Abstract ALUFONT-3 is a heat treatable aluminum sand casting alloy having good machinability with fair castability. It is a high strength casting alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: Al-40. Producer or source: Aluminium Industrie Atkiengesellschaft.

Sign in / Sign up

Export Citation Format

Share Document