PERALUMAN 300

Alloy Digest ◽  
2017 ◽  
Vol 66 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Aluminum Association ◽  
Cold Worked ◽  
Wrought Aluminum

Abstract PERALUMAN 300 is a 5754 aluminum alloy in the wrought aluminum-magnesium family (5000 or 5xxx series). It is closely related to the alloys 5154 and 5454 (Aluminum Association designations that only differ in the second digit are variations on the same alloy). Of the three 5x54 alloys, 5754 is the least alloyed (highest composition % of aluminum), but only by a small amount. It is used in similar applications. As wrought alloy, it can be formed by rolling, extrusion, and forging, but not casting. It can be cold worked to produce tempers with a higher strength but a lower ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance and surface qualities as well as forming, machining, and joining. Filing Code: Al-454. Producer or source: Lamineries Matthey SA.

ALUMINUM 6053

Alloy Digest ◽  
1979 ◽  
Vol 28 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Wrought Aluminum

Abstract ALUMINUM 6053 is a wrought aluminum alloy that can be hardened and strengthened by aging. It is characterized by moderate strength, good formability and excellent resistance to corrosion. This alloy is used widely for rivets. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-131. Producer or source: Various aluminum companies. Originally published November 1963, revised June 1979.

AA 7178

Alloy Digest ◽  
1990 ◽  
Vol 39 (8) ◽  
Keyword(s):  
Heat Treatment ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Wrought Aluminum

Abstract AA 7178 is a wrought aluminum alloy containing zinc, magnesium and copper capable of heat treatment to yield strengths of typically 73-75 ksi. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-306. Producer or source: Various aluminum companies.

ALCAN B33S

Alloy Digest ◽  
1967 ◽  
Vol 16 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Aluminum Company

Abstract Alcan B33S is an aluminum alloy recommended for architectural shapes requiring hard, corrosion resistant, colored finishes. It contains enough magnesium to render it heat treatable. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Al-170. Producer or source: Aluminum Company of Canada Ltd.

ANACONDA ALLOY 268

Alloy Digest ◽  
1982 ◽  
Vol 31 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Cold Working ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Wide Range ◽  
Copper Zinc ◽  
Cold Worked

Abstract ANACONDA Alloy 268 is a copper-zinc alloy with excellent cold-working properties; it can be cold worked by all the conventional fabrication processes. Its corrosion resistance is excellent-to-good in most environments. This alloy has a wide range of applications including items such as springs, bathroom fixtures, automotive radiators, lamp sockets and sanitary traps. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-442. Producer or source: Anaconda American Brass Company.

AMBRALOY 928

Alloy Digest ◽  
1958 ◽  
Vol 7 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
General Corrosion ◽  
Copper Aluminum

Abstract AMBRALOY-928 is a copper-aluminum alloy having high strength, hardness and excellent resistance to general corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, machining, and joining. Filing Code: Cu-69. Producer or source: American Brass Company.

KAISER ALUMINUM ALLOY 6033

Alloy Digest ◽  
2003 ◽  
Vol 52 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Alloy 6061

Abstract Kaiser Aluminum alloy 6033 has improved machinability over alloy 6061 with an addition of bismuth. The alloy also has a good anodizing response and higher strength than alloy 6061. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-386. Producer or source: Tennalum, A Division of Kaiser Aluminum.

COPPER ALLOY No. C43400

Alloy Digest ◽  
1984 ◽  
Vol 33 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Ductility ◽  
Copper Zinc ◽  
Cold Worked

Abstract Copper Alloy No. C43400 is a copper-zinc-tin alloy that can be cold worked readily by all conventional processes. It has moderate strength and good ductility. This alloy is used typically for electrical switch parts, contacts and relay springs. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-488. Producer or source: Brass mills.

COPPER ALLOY No. C61000

Alloy Digest ◽  
1983 ◽  
Vol 32 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Aluminum Bronze ◽  
Good Resistance ◽  
Medium Strength ◽  
Cold Worked ◽  
Strength Medium

Abstract Copper Alloy No. C61000 is an aluminum bronze containing nominally 92% copper and 8% aluminum. It is characterized by medium strength, medium ductility and a good capacity for being hot formed or cold worked. It has good resistance to corrosion. Its many uses include shafts, pump parts and bolts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: Cu-458. Producer or source: Copper and copper alloy mills.

BRIDGEPORT 54

Alloy Digest ◽  
1964 ◽  
Vol 13 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Erosion Resistance ◽  
Heat Treating ◽  
Good Strength ◽  
High Corrosion ◽  
Copper Zinc ◽  
Strength And Ductility

Abstract Bridgeport 54 is a copper-zinc-aluminum alloy having high corrosion and erosion resistance combined with good strength and ductility. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Cu-141. Producer or source: Bridgeport Brass Company.

KAISER ALUMINUM ALLOY 6262

Alloy Digest ◽  
1999 ◽  
Vol 48 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Automotive Parts

Abstract Kaiser Aluminum alloy 6262 (Tennalum alloy 6262) is an Al-Mg-Si-Cu-Cr-Pb-Bi alloy with characteristic good machinability and corrosion resistance and a good acceptance of coatings (anodize response). It is typically used in automotive parts, fittings, building hardware, and valve components. This datasheet provides information on composition, physical properties, tensile properties, and shear strength as well as fatigue. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-361. Producer or source: Tennalum, A Division of Kaiser Aluminum.

Sign in / Sign up

Export Citation Format

Share Document