Enhancement of Injection Molding Consistency by Adjusting Velocity/Pressure Switching Time Based on Clamping Force

2019 ◽  
Vol 34 (5) ◽  
pp. 564-572 ◽  
Author(s):  
J.-Y. Chen ◽  
C.-Y. Liu ◽  
M.-S. Huang
Keyword(s):  
Injection Molding ◽  
Switching Time ◽  
Clamping Force ◽  
Velocity Pressure

Ultrasonic measurement of clamping force for injection molding machine

2019 ◽  
Vol 39 (4) ◽  
pp. 388-396 ◽  
Author(s):  
Peng Zhao ◽  
Yao Zhao ◽  
Jianfeng Zhang ◽  
Junye Huang ◽  
Neng Xia ◽  
...  
Keyword(s):  
Injection Molding ◽  
Measurement Method ◽  
Large Scale ◽  
Force Measurement ◽  
Low Cost ◽  
Ultrasonic Method ◽  
Injection Molding Process ◽  
Propagation Time ◽  
Clamping Force ◽  
Molding Process

AbstractAn online and feasible clamping force measurement method is important in the injection molding process and equipment. Based on the sono-elasticity theory, anin situclamping force measurement method using ultrasonic technology is proposed in this paper. A mathematical model is established to describe the relationship between the ultrasonic propagation time, mold thickness, and clamping force. A series of experiments are performed to verify the proposed method. Experimental findings show that the measurement results of the proposed method agree well with those of the magnetic enclosed-type clamping force tester method, with difference squares less than 2 (MPa)2and errors bars less than 0.7 MPa. The ultrasonic method can be applied in molds of different thickness, injection molding machines of different clamping scales, and large-scale injection cycles. The proposed method offers advantages of being highly accurate, highly stable, simple, feasible, non-destructive, and low-cost, providing significant application prospects in the injection molding industry.

scholarly journals Tie-Bar Elongation Based Filling-To-Packing Switchover Control and Prediction of Injection Molding Quality

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1168 ◽  
Author(s):  
Jian-Yu Chen ◽  
Chun-Ying Liu ◽  
Ming-Shyan Huang
Keyword(s):  
Injection Molding ◽  
Pressure Sensors ◽  
Clamping Force ◽  
Cavity Pressure ◽  
Testing Specimen ◽  
Injection Speed ◽  
Novel Approach ◽  
Pressure Profiles ◽  
Molded Parts ◽  
Short Shot

Filling-to-packing switchover (also called V/P switchover) is critical for assuring injection molding quality. An improper V/P switchover setting may result in various defects of injection-molded parts, such as excessive residual stress, flash, short shot, and warpage, etc. To enhance a consistent molding quality, recent V/P switchover approaches adopt cavity pressure profiles requiring sensors embedded in mold cavities, which is invasive to mold cavities and more expensive. Instead of using cavity pressure sensors, by working with the most popular screw position switchover control, this study hereby proposes a novel approach of tuning V/P switchover timing using a tie-bar elongation profile. In this investigation, a dumbbell testing specimen mold is applied to verify the feasibility of the method proposed. The results show that the mold filling and packing stages can be observed along the tie-bar elongation profile, detected by mounting strain gauges on the tie bars. Also, the characteristics of the cavity pressure are similar to those of the tie-bar elongation profile under a proper clamping force condition. Moreover, the varying process parameter settings which include injection speed, V/P switchover point, and holding pressure, can be reflected in these profiles. By extracting their characteristics, the application of the V/P switchover is proved to be realistic. This research conducted an experiment to verify the proposed V/P switchover decision method based on the tie-bar elongation profile. The result showed that the fluctuation of the part’s weight corresponding to a slight change of the barrel’s temperature from 210 °C to 215 °C can be successfully controlled with this method. Besides, the maximum clamping force increment extracted from the tie-bar elongation profile was found to be a good indicator for online monitoring of the reground material variation.

Design and Motion Simulation of the Clamping Mechanism of Micro-Structure Injection Molding Machine

2014 ◽  
Vol 945-949 ◽  
pp. 670-675 ◽  
Author(s):  
Bai Ge Chou ◽  
Heng Zhi Cai ◽  
Gang Zhou ◽  
Ya Jun Zhang ◽  
Jian Zhuang
Keyword(s):  
Injection Molding ◽  
Kinetic Characteristic ◽  
Clamping Force ◽  
Molding Machine ◽  
Micro Structure ◽  
Injection Molding Machine ◽  
Micron Size ◽  
Lqr Controller ◽  
And Control ◽  
Micro Structures

Micro-structure injection molding machine is mainly used for processing the plastic products in micron-size or with micro-structures. This paper focuses on the design and control of the clamping mechanism of micro-structure injection molding machine. Firstly, the deformation of the clamping mechanism was analyzed. The simulation results shows that the clamping force is 5.0051×105N, and it’s bigger than the design value 500kN. Secondly, the kinetic characteristic of the clamping was simulated by ADAMS software. The curves of the displacement, velocity, clamping force of moving platen were analyzed. Thirdly, the control model of clamping mechanism was established. And the LQR controller was designed and simulated by Matlab. The rise time is 0.010s, the settling time is 0.026s and the steady-state is 0.307m.

scholarly journals Optimization on the Injection Molding Propypopylene Parameters Using Central Composite Design for Minimizing Defects

2020 ◽  
Vol 55 (2) ◽  
Author(s):  
Moh. Hartono ◽  
Pratikto ◽  
Purnomo B. Santoso ◽  
Sugiono
Keyword(s):  
Injection Molding ◽  
Central Composite Design ◽  
Injection Pressure ◽  
Holding Time ◽  
Clamping Force ◽  
Molding Process ◽  
Injection Speed ◽  
Injection Temperature ◽  
Central Composite ◽  
Plastic Products

This study aims to simultaneously forecast and investigate the optimization process characterization of the design of controlled parameters in the injection process of polypropylene molding including injection pressure combination, clamping force, injection temperature, injection speed, and holding time, and their interaction to produce qualified plastic by minimizing defects. The experimental methods used the central composite design of response surface method with five factors and a variety of levels. This method is more effective because it is an improvement on and a development from previous studies—especially those related to the plastic molding process. Additionally, it can simultaneously predict and optimize the obtaining of the highest quality plastic products as well as minimizing defects. The results are in the form of a combination of control level factors and interactions among the factors that generate the robust output of plastic products with minimum defects. Moreover, the optimum settings of the parameters provides a global solution at an injection temperature of 275°C, injection pressure of 75 bar, injection speed of 98%, clamping force of 88 tons, and a holding time of 8 seconds to generate a response to product probability defects by 0.0062. The benefit is that it can reveal the behavior and characteristics of parameter design and their interactions in the plastic injection molding process to produce qualified plastics and minimize product defects.

Multi-objective optimization in plastic injection molding to reduce weldline and clamping force

2021 ◽  
Vol 2021.58 (0) ◽  
pp. B016
Author(s):  
Satoko SUYAMA ◽  
Satoshi KITAYAMA ◽  
Masahiro TAKANO ◽  
Yusuke YAMAZAKI ◽  
Yoshikazu KUBO ◽  
...  
Keyword(s):  
Injection Molding ◽  
Plastic Injection Molding ◽  
Clamping Force ◽  
Multi Objective Optimization ◽  
Multi Objective ◽  
Plastic Injection
Sign in / Sign up

Export Citation Format

Share Document