Processing of Polyetherimide/Cloisite 30B Nanocomposite by Vibration Casting Method

2014 ◽  
Vol 29 (5) ◽  
pp. 635-640 ◽  
Author(s):  
M. Dwivedi ◽  
K. K. Gaur ◽  
S. Alam ◽  
N. Bhatnagar ◽  
A. K. Ghosh
Keyword(s):  
Casting Method ◽  
Cloisite 30B ◽  
Vibration Casting

Formulation and Evaluation of Chitosan-Polyaniline Nanocomposites for Controlled Release of Anticancer Drug Doxorubicin

2018 ◽  
Vol 8 (2) ◽  
Author(s):  
Dillip Kumar Behera ◽  
Kampal Mishra ◽  
Padmolochan Nayak
Keyword(s):  
Tensile Strength ◽  
Drug Release ◽  
Nanocomposite Films ◽  
Casting Method ◽  
Sustained Drug Release ◽  
In Vitro Drug Release ◽  
Clay Particles ◽  
Solution Casting Method ◽  
Nanoclay Content

In this present work, chitosan (CS) crosslink with polyaniline (PANI) with montmorilonite (MMT) called as (CSPANI/MMT) and CS crosslink with PANI without MMT called as (CS-PANI) were prepared by employing the solution casting method. Further the formation of nanocomposites CS-PANI/MMT and CS-PANI were investigated using XRD, FTIR, SEM and tensile strength. Water uptake and swelling ratio of the CS-PANI and CS-PANI/MMT were found to decrease with increase in concentration of clay. Mechanical properties of the CS-PANI and CS-PANI/MMT were assessed in terms of tensile strength and extensibility using texture analyzer. Increase in tensile strength and reduction in extensibility was reported with increase in the nanoclay content. In vitro drug release study on CS-PANI and CS-PANI/MMT indicated pronounced sustained release of doxorubicin by the incorporation of clay particles in the CS polymer matrix. Overall CSPANI/MMT nanocomposite films exhibited improved mechanical and sustained drug release properties than CS-PANI.

Fabrication and Characterization of MMCs Using Stir Casting Method

2014 ◽  
Vol 4 (3) ◽  
pp. 27-32
Author(s):  
Jeevan Singh Bisht ◽  
◽  
Akshay Dvivedi ◽  
Apurbba Kumar Sharma ◽  
◽  
...  
Keyword(s):  
Stir Casting ◽  
Casting Method ◽  
Fabrication And Characterization

Effect of Cloisite 30B nanoclay on the mechanical properties of HDPE nanocomposites

2017 ◽  
Vol 59 (4) ◽  
pp. 355-360 ◽  
Author(s):  
Natarajan Venkatesan ◽  
Govindasamy Bhavani Bhaskar ◽  
Sudhakar Rajesh ◽  
Kaliyaperumal Pazhanivel ◽  
Suresh Sagadevan
Keyword(s):  
Mechanical Properties ◽  
Cloisite 30B

APPLICATIONS OF CHITOSAN-SULFATHIAZOLE AS ANTIMICROBIAL AGENT

2018 ◽  
Vol 28 (2) ◽  
pp. 429-432
Author(s):  
Dilyana Zvezdova
Keyword(s):  
Wound Healing ◽  
Antibacterial Activity ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Antimicrobial Agent ◽  
Defense Mechanisms ◽  
Solvent Casting ◽  
Casting Method ◽  
Gram Negative ◽  
Positively Charged

Chitosan, a hydrophilic biopolymer industrially obtained by N-deacetylation of chitin, can be applied as an antimicrobial agent. It highlights the applications of chitosan as an antimicrobial agent against fungi, bacteria, and viruses and as an elicitor of plant defense mechanisms. A series of novel chitosan-sulfathiazole nanocomposite (CSFZ) films were prepared by using solvent casting method for wound healing application. Fourier transform infrared spectroscopy (FTIR) was employed to ascertain the interaction between negatively charged sulfathiazole and positively charged chitosan. Moreover, the antibacterial activity of the films was investigated against gram positive and gram negative microorganisms. It was found that all CSFZ films showed good inhibitory activity against all the tested bacteria as compared to control. The above analysis suggested that the CSFZ films could be used as potential candidates for wound healing application.

Error determination of hidden flows by hydrostatic weighing in parts obtained by casting

2020 ◽  
pp. 339-342
Author(s):  
M.S. Razumov ◽  
P.V. Glazkov ◽  
V.S. Kochergin ◽  
A.S. Byshkin
Keyword(s):  
Theoretical Calculations ◽  
Casting Defects ◽  
Casting Method ◽  
Error Determination ◽  
Hydrostatic Weighing ◽  
Weighing Method ◽  
Hydrostatic Weighing Method

The existing methods for detecting of casting defects and their disadvantages are considered. Hydrostatic weighing method is proposed for detecting of hidden fl aws by comparing the reference and calculated densities of the casting, method for calculating of the error is recommended. The adequacy of theoretical calculations is verifi ed experimentally

Morphology and Mechanical Properties of Polyethylene Terephthalate/Ethylene Propylene Diene Monomer (PET/EPDM) in the Presence of Nanoclay

2020 ◽  
Vol 57 (3) ◽  
pp. 249-259
Author(s):  
Baifen Liu ◽  
Mohammad Mirjalili ◽  
Peiman Valipour ◽  
Sajad Porzal ◽  
shirin Nourbakhsh
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Thermal Destruction ◽  
Processing Temperature ◽  
Tem Analysis ◽  
Maximum Stiffness ◽  
Cloisite 30B ◽  
Nano Clay ◽  
The Matrix ◽  
Sample Maximum

This research deals with the mechanical properties, microstructure, and interrelations of triple nanocomposite based on PET/EPDM/Nanoclay. These properties were examined in different percentages of PET/EPDM blend with compatibilizer (Styrene-Ethylene/Butylene-Styrene)-G-(Maleic anhydrate) (SEBS-g-MAH). Results showed that the addition of 15% SEBS-g-MAH improved the toughness and impact strength of this nanocomposite. SEM micrographs indicated the most stable fuzzy microstructure in a 50/50 mixture of scattered phases of EPDM/SEBS-g-MAH. The effects of percentages of 1, 3, 5, 7 nanoclay Cloisite 30B (C30B) on the improvement of the properties were evaluated. With the addition of nano clay, the toughness and impact strength was reduced. Thermal destruction of nanoclay in processing temperature led to the decreasing dispersion of clay plates in the matrix and a reduction in the distances of nano clay plates in the composite compared to pure nano clay. XRD and TEM analysis was used to demonstrate the results. By adding 1% of nanoclay to the optimal sample, maximum stiffness, and Impact strength, among other nanocomposites, was achieved.

Investigation of the Structure and Magnetic Properties of Bulk Amorphous FeCoYB Alloy

2017 ◽  
Vol 68 (9) ◽  
pp. 2162-2165 ◽  
Author(s):  
Katarzyna Bloch ◽  
Mihail Aurel Titu ◽  
Andrei Victor Sandu
Keyword(s):  
Magnetic Field ◽  
Magnetic Properties ◽  
Hyperfine Field ◽  
Irreversible Processes ◽  
Magnetization Process ◽  
Casting Method ◽  
The Core ◽  
Injection Casting ◽  
Core Losses ◽  
Microstructural Studies

The paper presents the results of structural and microstructural studies for the bulk Fe65Co10Y5B20 and Fe63Co10Y7B20 alloys. All the rods obtained by the injection casting method were fully amorphous. It was found on the basis of analysis of distribution of hyperfine field induction that the samples of Fe65Co10Y5B20 alloy are characterised with greater atomic packing density. Addition of Y to the bulk amorphous Fe65Co10Y5B20 alloy leads to the decrease of the average induction of hyperfine field value. In a strong magnetic field (i.e. greater than 0.4HC), during the magnetization process of the alloys, where irreversible processes take place, the core losses associated with magnetization and de-magnetization were investigated.

Fabrication of Silica/PMMA Composite Based Superhydrophobic Coating by Drop Casting Method

2020 ◽  
Vol 12 (2) ◽  
pp. 02023-1-02023-4
Author(s):  
Sanjay S. Latthe ◽  
◽  
Rajaram S. Sutar ◽  
A. K. Bhosale ◽  
Vishnu S. Kodag ◽  
...  
Keyword(s):  
Superhydrophobic Coating ◽  
Casting Method
Sign in / Sign up

Export Citation Format

Share Document