Blank Design and Fiber Orientation Distribution During Compression Molding of GMT

1999 ◽  
Vol 14 (4) ◽  
pp. 350-357 ◽  
Author(s):  
L. Zhang ◽  
G. Dai
Keyword(s):  
Fiber Orientation ◽  
Orientation Distribution ◽  
Compression Molding ◽  
Blank Design ◽  
Fiber Orientation Distribution

Effect of Fiber Orientation on the Tensile Strength in Fiber-Reinforced Polymeric Composite Materials

2005 ◽  
Vol 297-300 ◽  
pp. 2897-2902 ◽  
Author(s):  
Jin Woo Kim ◽  
Jung Ju Lee ◽  
Dong Gi Lee
Keyword(s):  
Tensile Strength ◽  
Composite Material ◽  
Fiber Orientation ◽  
Polymeric Composite ◽  
Orientation Distribution ◽  
Fiber Content ◽  
Fiber Reinforced ◽  
Composite Sheet ◽  
Content Ratio ◽  
Fiber Orientation Distribution

The study for strength calculation of one way fiber-reinforced composites and the study measuring precisely fiber orientation distribution were presented. However, because the DB that can predict mechanical properties of composite material and fiber orientation distribution by the fiber content ratio was not constructed, we need the systematic study for that. Therefore, in this study, we investigated what effect the fiber content ratio and fiber orientation distribution have on the strength of composite sheet after making fiber reinforced polymeric composite sheet by changing fiber orientation distribution with the fiber content ratio. The result of this study will become a guide to design data of the most suitable parts design or fiber reinforced polymeric composite sheet that uses the fiber reinforced polymeric composite sheet in industry spot, because it was conducted in terms of developing products. We studied the effect the fiber orientation distribution has on tensile strength of fiber reinforced polymeric composite material and achieved this results below. We can say that the increasing range of the value of fiber reinforced polymeric composite’s tensile strength in the direction of fiber orientation is getting wider as the fiber content ratio increases. It shows that the value of fiber reinforced polymeric composite’s tensile strength in the direction of fiber orientation 90° is similar with the value of polypropylene’s intensity when fiber orientation function is J= 0.7, regardless of the fiber content ratio. Tensile strength of fiber reinforced polymeric composite is affected by the fiber orientation distribution more than by the fiber content ratio.

Development of the layered structure in a double-gated glass fiber-reinforced polypropylene injection molding: Experimental and simulated results

2018 ◽  
Vol 37 (14) ◽  
pp. 945-959 ◽  
Author(s):  
MC Quintana ◽  
MP Frontini
Keyword(s):  
Glass Fiber ◽  
Layered Structure ◽  
Fiber Orientation ◽  
Flow Direction ◽  
Weld Line ◽  
Orientation Distribution ◽  
Simulation Software ◽  
Distribution Data ◽  
Melt Temperature ◽  
Fiber Orientation Distribution

The present study aims to experimentally validate numerical simulation of fiber orientation distribution performed by molding simulation software Moldex3D in a double-gated injection-molded glass fiber-filled (40 wt%) polypropylene box, by making a detailed comparison of predicted and experimentally measured fiber orientation distribution data. The modeling approach evaluated in this work consists in the implementation of the Folgar–Tucker rotary diffusion model with the invariant-based optimal fitting closure approximation for the fourth-order orientation tensor. The specimen used has a weld line in the center and sharp corners. This investigation characterizes in detail the development of the through-thickness layered structure at distinctive locations of the specimen. The sensitivity of fiber orientation distribution and the layered structure to changes upon injection time and melt temperature is also evaluated. The boxes display the typical layered laminate structure, with fibers aligned in the main flow direction near the walls (shell layer) and less oriented in the middle plane (core layer). The boxes injected at the lowest melt temperature display an additional skin layer. Unfortunately, simulation fails in predicting the five layers structure developed under these latter conditions. The grade of fiber orientation is deemed to be independent of process parameters but not the layered structure.

Sign in / Sign up

Export Citation Format

Share Document