Effects of Lanthanum on Magnetic Behavior and Hardness of Electroless Ni–Fe–P Deposits

2009 ◽  
Vol 100 (5) ◽  
pp. 667-671 ◽  
Author(s):  
Wei-Qing Huang ◽  
Gui-Fang Huang ◽  
Xing Wang ◽  
Chun-Lin Xie ◽  
Bing Liang
Keyword(s):  
Magnetic Behavior ◽  
Electroless Ni

Lorentz electron microscopy of magnetic domains in rapidly solidified and annealed Pt-Co-B alloys

1991 ◽  
Vol 49 ◽  
pp. 784-785
Author(s):  
N. Qiu ◽  
J. E. Wittig
Keyword(s):  
Rapid Solidification ◽  
Ion Beam ◽  
Magnetic Behavior ◽  
High Coercivity ◽  
Magnetic Domains ◽  
Beam Angle ◽  
Tem Analysis ◽  
Intrinsic Coercivity ◽  
Hard Magnets ◽  
Rapidly Solidified

PtCo hard magnets have specialized applications owing to their relatively high coercivity combined with corrosion resistance and ductility. Increased intrinsic coercivity has been recently obtained by rapid solidification processing of PtCo alloys containing boron. After rapid solidification by double anvil splat quenching and subsequent annealing for 30 minutes at 650°C, an alloy with composition Pt42Co45B13 (at.%) exhibited intrinsic coercivity up to 14kOe. This represents a significant improvement compared to the average coercivities in conventional binary PtCo alloys of 5 to 8 kOe.Rapidly solidified specimens of Pt42Co45B13 (at.%) were annealed at 650°C and 800°C for 30 minutes. The magnetic behavior was characterized by measuring the coercive force (Hc). Samples for TEM analysis were mechanically thinned to 100 μm, dimpled to about 30 nm, and ion milled to electron transparency in a Gatan Duomill at 5 kV and 1 mA gun current. The incident ion beam angle was set at 15° and the samples were liquid nitrogen cooled during milling. These samples were analyzed with a Philips CM20T TEM/STEM operated at 200 kV.

STRANGE MAGNETIC BEHAVIOR IN THE LITHIUM-METHYLAMINE SYSTEM

1980 ◽  
Vol 41 (C8) ◽  
pp. C8-45-C8-48
Author(s):  
A. Stacy ◽  
D. C. Johnson ◽  
M. J. Sienko
Keyword(s):  
Magnetic Behavior

Magnetic Properties of xCeO2•(50 − x) PbO•50B2O3 Glasses and Glass Ceramics

2017 ◽  
Vol 13 (1) ◽  
pp. 4486-4494 ◽  
Author(s):  
G.El Damrawi ◽  
F. Gharghar
Keyword(s):  
Magnetic Properties ◽  
Large Scale ◽  
Glass Ceramics ◽  
Magnetic Behavior ◽  
Crystal Formation ◽  
Dual Roles ◽  
Effective Agent ◽  
Ordered Structures ◽  
Essential Change

Cerium oxide in borate glasses of composition xCeO2·(50 − x)PbO·50B2O3 plays an important role in changing both microstructure and magnetic behaviors of the system. The structural role of CeO2 as an effective agent for cluster and crystal formation in borate network is clearly evidenced by XRD technique. Both structure and size of well-formed cerium separated clusters have an effective influence on the structural properties. The cluster aggregations are documented to be found in different range ordered structures, intermediate and long range orders are the most structures in which cerium phases are involved. The nano-sized crystallized cerium species in lead borate phase are evidenced to have magnetic behavior.  The criteria of building new specific borate phase enriched with cerium as ferrimagnetism has been found to keep the magnetization in large scale even at extremely high temperature. Treating the glass thermally or exposing it to an effective dose of ionized radiation is evidenced to have an essential change in magnetic properties. Thermal heat treatment for some of investigated materials is observed to play dual roles in the glass matrix. It can not only enhance alignment processes of the magnetic moment but also increases the capacity of the crystallite species in the magnetic phases. On the other hand, reverse processes are remarked under the effect of irradiation. The magnetization was found to be lowered, since several types of the trap centers which are regarded as defective states can be produced by effect of ionized radiation. 

Preparation of IR and Microwave Absorbing Barium Ferrite Material by Electroless Ni-P Plating

2009 ◽  
Vol 24 (1) ◽  
pp. 97-102
Author(s):  
Xiao-Wei WU ◽  
Yu-Jie FENG ◽  
Han WEI ◽  
Yan-Kun LIU
Keyword(s):  
Barium Ferrite ◽  
Ferrite Material ◽  
Microwave Absorbing ◽  
Electroless Ni

Structural, Morphological and Magnetic Characterization of Sm-substituted Ni-Zn Ferrite

2020 ◽  
Vol 10 (2) ◽  
pp. 152-156 ◽  
Author(s):  
Muhammad Hanif bin Zahari ◽  
Beh Hoe Guan ◽  
Lee Kean Chuan ◽  
Afiq Azri bin Zainudin
Keyword(s):  
Magnetic Properties ◽  
Rare Earth ◽  
Saturation Magnetization ◽  
Sol Gel ◽  
Magnetic Behavior ◽  
Rare Earth Ions ◽  
Ion Concentration ◽  
Zn Ferrite ◽  
Auto Combustion ◽  
Combustion Technique

Background: Rare earth materials are known for its salient electrical insulation properties with high values of electrical resistivity. It is expected that the substitution of rare earth ions into spinel ferrites could significantly alter its magnetic properties. In this work, the effect of the addition of Samarium ions on the structural, morphological and magnetic properties of Ni0.5Zn0.5SmxFe2-xO4 (x=0.00, 0.02, 0.04, 0.06, 0.08, 0.10) synthesized using sol-gel auto combustion technique was investigated. Methods: A series of Samarium-substituted Ni-Zn ferrite nanoparticles (Ni0.5Zn0.5SmxFe2-xO4 where x=0.00, 0.02, 0.04, 0.06, 0.08, 0.10) were synthesized by sol-gel auto-combustion technique. Structural, morphological and magnetic properties of the samples were examined through X-Ray Diffraction (XRD), Field-Emission Scanning Electron Microscope (FESEM) and Vibrating Sample Magnetometer (VSM) measurements. Results: XRD patterns revealed single-phased samples with spinel cubic structure up to x= 0.04. The average crystallite size of the samples varied in the range of 41.8 – 85.6 nm. The prepared samples exhibited agglomerated particles with larger grain size observed in Sm-substituted Ni-Zn ferrite as compared to the unsubstituted sample. The prepared samples exhibited typical soft magnetic behavior as evidenced by the small coercivity field. The magnetic saturation, Ms values decreased as the Sm3+ concentration increases. Conclusion: The substituted Ni-Zn ferrites form agglomerated particles inching towards more uniform microstructure with each increase in Sm3+ substitution. The saturation magnetization of substituted samples decreases with the increase of samarium ion concentration. The decrease in saturation magnetization can be explained based on weak super exchange interaction between A and B sites. The difference in magnetic properties between the samples despite the slight difference in Sm3+ concentrations suggests that the properties of the NiZnFe2O4 can be ‘tuned’, depending on the present need, through the substitution of Fe3+ with rare earth ions.

Impact of Barium in Improving Corrosion Resistance and Properties of Electroless Ni–Ba–B Alloy Deposits

2019 ◽  
Vol 26 (7) ◽  
pp. 979-988 ◽  
Author(s):  
Sareh Rahmani ◽  
Abdollah Omrani ◽  
Sayed Reza Hosseini
Keyword(s):  
Corrosion Resistance ◽  
Electroless Ni

Time-dependent corrosion behavior of electroless Ni–P coating in H2S/Cl− environment

2021 ◽  
Vol 46 (21) ◽  
pp. 11849-11864
Author(s):  
Longyi Li ◽  
Jun Wang ◽  
Jie Xiao ◽  
Jing Yan ◽  
Hongyuan Fan ◽  
...  
Keyword(s):  
Corrosion Behavior ◽  
Time Dependent ◽  
Electroless Ni
Sign in / Sign up

Export Citation Format

Share Document