Punch-shear tests and size effects for evaluating the shear strength of machinable ceramics

2004 ◽  
Vol 95 (5) ◽  
pp. 372-376 ◽  
Author(s):  
Yiwang Bao ◽  
Haibin Zhang ◽  
Yanchun Zhou
Keyword(s):  
Shear Strength ◽  
Size Effects ◽  
Shear Tests

scholarly journals The Shear Strength Characteristics of Frozen Coarse Granular Debris

1984 ◽  
Vol 30 (106) ◽  
pp. 348-357 ◽  
Author(s):  
W.G. Nickling ◽  
L. Bennett
Keyword(s):  
Shear Strength ◽  
Normal Load ◽  
Strength Characteristics ◽  
Shear Tests ◽  
Critical Limit ◽  
Load Rate ◽  
Polycrystalline Ice ◽  
Saturated Sample ◽  
The Difference ◽  
Ice Content

AbstractThe effect of ice content and normal load on the shear strength characteristics of a frozen coarse granular debris was investigated. 31 shear tests were carried out in a modified shearbox allowing a sample temperature of (–1.0 ± 0.2)° C and a load rate of 9.63 × 10−4 cm/min. The tests showed that as the ice content of the frozen debris was increased from 0% (under-saturated) to 25% (saturated), sample shear strength was markedly increased. In contrast, sample shear strength was reduced as ice content was increased from 25% (saturated) to 100% (supersaturated). The changes in shear strength with increasing ice content were attributed directly to changes in internal friction and the cohesive effects of the pore ice. The shear tests also indicate that shear strength increases with increasing normal load up to a critical limit. Above this limit, dilatancy is suppressed causing the shear strength to decrease or remain relatively constant with increased normal load.The stress-strain curves of the 31 tests indicated that samples with higher ice contents tended to reach peak strength (τP) with less displacement during shear. Moreover, the difference between τp and τr (residual strength) was lowest for pure polycrystalline ice and highest for ice-saturated samples. The Mohr-Coulomb failure envelopes displayed very distinctive parabolic curvilinearity. The degree of curvature is thought to be a function of ice creep at low normal loads and particle fracture and crushing at high normal loads.

scholarly journals An Experimental Study on a Composite Bonding Structure for Steel Bridge Deck Pavements

2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Xiaoguang Zheng ◽  
Qi Ren ◽  
Huan Xiong ◽  
Xiaoming Song
Keyword(s):  
Tensile Strength ◽  
Shear Strength ◽  
Epoxy Resin ◽  
Bonding Strength ◽  
Bridge Deck ◽  
Steel Bridge ◽  
Shear Tests ◽  
Bonding Structure ◽  
Asphalt Overlay ◽  
Strength Tests

As one of the major contributors to the early failures of steel bridge deck pavements, the bonding between steel and asphalt overlay has long been a troublesome issue. In this paper, a novel composite bonding structure was introduced consisting of epoxy resin micaceous iron oxide (EMIO) primer, solvent-free epoxy resin waterproof layer, and ethylene-vinyl acetate (EVA) hot melt pellets. A series of strength tests were performed to study its mechanical properties, including pull-off strength tests, dumbbell tensile tests, lap shear tests, direct tension tests, and 45°-inclined shear tests. The results suggested that the bonding structure exhibited fair bonding strength, tensile strength, and shear strength. Anisotropic behaviour was also observed at high temperatures. For epoxy resin waterproof layer, the loss of bonding strength, tensile strength, and shear strength at 60°C was 70%, 35%, and 39%, respectively. Subsequent pavement performance-oriented tests included five-point bending tests and accelerated wheel tracking tests. The impacts of bonding on fatigue resistance and rutting propagation were studied. It was found that the proposed bonding structure could provide a durable and well-bonded interface and was thus beneficial to prolong the fatigue lives of asphalt overlay. The choice of bonding materials was found irrelevant to the ultimate rutting depth of pavements. But the bonding combination of epoxy resin waterproof and EVA pellets could delay the early-stage rutting propagation.

scholarly journals A Comparison between Interlaminar and In-plane Shear Strength of Unidirectional Glass Fibre-epoxy

1994 ◽  
Vol 3 (2) ◽  
pp. 096369359400300 ◽  
Author(s):  
Michael R. Wisnom ◽  
M. I. Jones
Keyword(s):  
Shear Strength ◽  
Cross Section ◽  
Glass Fibre ◽  
Shear Tests ◽  
Plane Shear ◽  
Short Beam ◽  
Unidirectional Glass ◽  
Beam Shear

Short beam shear tests have been carried out on square cross-section specimens cut from a 32 ply plate. By rotating the beams through 90° both interlaminar and in-plane strength can be measured with identical specimens. The in-plane shear strength was found to be at least 10% higher than the interlaminar strength.

scholarly journals Using Post-Harvest Waste to Improve Shearing Behaviour of Loess and Its Validation by Multiscale Direct Shear Tests

2019 ◽  
Vol 9 (23) ◽  
pp. 5206 ◽  
Author(s):  
Wen-Chieh Cheng ◽  
Zhong-Fei Xue ◽  
Lin Wang ◽  
Jian Xu
Keyword(s):  
Shear Stress ◽  
Shear Strength ◽  
Strain Hardening ◽  
Gradual Increase ◽  
Small Scale ◽  
Optimal Dosage ◽  
Direct Shear ◽  
Shear Tests ◽  
Post Harvest ◽  
Direct Shear Tests

Loess and PHW (post-harvest waste) are easily accessible in the Chinese Loess Plateau and have been widely applied to construction of residential houses that have been inhabited for decades under the effect of freeze-thaw cycles. Although many researchers have recognised that the addition of fibers to loess soil is effective in preventing soil erosion and stabilising slopes, a consensus on this claim has not been reached yet. This study investigates the shearing behaviour of the loess-PHW mixture using small-scale and large-scale direct shear (SSDS and LSDS) tests. Four typical shear stress versus horizontal displacement curves from the multiscale direct shear tests are recognised where one is featured with strain-softening shape and the other three with a strain-hardening shape. Two out of the three curves with strain-hardening shape show a gradual increase in the shear stress at additional and larger displacements, respectively, in which some factor starts to have an influence on the shearing behaviour. Comparisons of the shear strength measured in SSDS and LSDS are made, indicating that there are differences between SSDS and LSDS. The effect of PHW addition on shear strength is assessed in order to determine the optimal dosage. The improvement of shear strength is attributed to the effect of particle inter-locking, resulting from the addition of PHW to loess specimens, and takes effect as the water content surpassed a threshold, i.e., >14%, that facilitates particle rearrangement. Particle-box interaction behaviour is assessed at the same time, and the findings satisfactorily address the main cause of the gradual increase in shear stress following the curve inflection point. The improved shearing behaviour proves the ability of the loess-PHW mixture to resist the seepage force and consequently stratum erosion.

The Shear Strength Characteristics of Frozen Coarse Granular Debris

1984 ◽  
Vol 30 (106) ◽  
pp. 348-357 ◽  
Author(s):  
W.G. Nickling ◽  
L. Bennett
Keyword(s):  
Shear Strength ◽  
Normal Load ◽  
Strength Characteristics ◽  
Shear Tests ◽  
Critical Limit ◽  
Load Rate ◽  
Polycrystalline Ice ◽  
Saturated Sample ◽  
The Difference ◽  
Ice Content

Abstract The effect of ice content and normal load on the shear strength characteristics of a frozen coarse granular debris was investigated. 31 shear tests were carried out in a modified shearbox allowing a sample temperature of (–1.0 ± 0.2)° C and a load rate of 9.63 × 10−4 cm/min. The tests showed that as the ice content of the frozen debris was increased from 0% (under-saturated) to 25% (saturated), sample shear strength was markedly increased. In contrast, sample shear strength was reduced as ice content was increased from 25% (saturated) to 100% (supersaturated). The changes in shear strength with increasing ice content were attributed directly to changes in internal friction and the cohesive effects of the pore ice. The shear tests also indicate that shear strength increases with increasing normal load up to a critical limit. Above this limit, dilatancy is suppressed causing the shear strength to decrease or remain relatively constant with increased normal load. The stress-strain curves of the 31 tests indicated that samples with higher ice contents tended to reach peak strength (τP) with less displacement during shear. Moreover, the difference between τp and τr (residual strength) was lowest for pure polycrystalline ice and highest for ice-saturated samples. The Mohr-Coulomb failure envelopes displayed very distinctive parabolic curvilinearity. The degree of curvature is thought to be a function of ice creep at low normal loads and particle fracture and crushing at high normal loads.

Research on Shear Bearing Capacity and Sliding Performance of Modified Mortar Isolation Sliding Layer for Rural Construction

2015 ◽  
Vol 777 ◽  
pp. 185-189
Author(s):  
Jun Lin Guo ◽  
Kang Yuan ◽  
Ling Ling Zhang
Keyword(s):  
Shear Strength ◽  
Low Grade ◽  
Horizontal Shear ◽  
Shear Tests ◽  
Isolation Technique ◽  
Deformation Limit ◽  
Sliding Isolation ◽  
Shear Bearing Capacity ◽  
Working Performance ◽  
Rural Construction

This paper studied the cracking and sliding working performance of modified mortar isolation sliding layer in a sliding isolation technique suitable for the rural construction. The technology realizes the sliding isolation by setting the up and down ring beams at the outdoor ground bonded by low-grade modified mortar and the shear deformation limit by setting rubber beams. Through the compression-shear tests on different grades of modified mortar which mixed with graphite and talc, the horizontal shear strength of different modified mortars have been acquired. the friction performances of different modified mortars have been Compared by the friction coefficient tests,. Through calculating, the sliding performances of modified mortar layer under the seismic actions of different seismic fortification intensities have been achieved. The research shows that the modified mortar sliding layer has well sliding performance, and it is able to meet the demand of sliding isolation of the rural construction.

scholarly journals Tensile and Shear Mechanical Characteristics of Longmaxi Shale Laminae Dependent on the Mineral Composition and Morphology

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2977
Author(s):  
Lihui Li ◽  
Beixiu Huang ◽  
Xiaolin Huang ◽  
Ming Wang ◽  
Xiao Li
Keyword(s):  
Shear Strength ◽  
Friction Angle ◽  
Fracture Morphology ◽  
Shear Tests ◽  
Fracture Surface Roughness ◽  
Lower Silurian ◽  
Angle Fracture ◽  
Longmaxi Shale ◽  
Tensile Fracturing ◽  
Shear Behaviors

Laminae are well developed in shale and generally influence fracture propagation during hydraulic fracturing. Hence, comprehensively understanding the tension and shear behaviors of shale laminae is crucial. There have been limited systematic studies thus far on the tensile and shear strength as well as fracture morphology of shale laminae. In this study, the Lower Silurian Longmaxi Shale (China) was investigated via Brazilian tensile and angle-varied plate shear tests. Five lamina types were tested, i.e., calcite (Cal), pyrite (Py), organic-enriched (Oc), the interface between Cal and Oc (Cal-Oc), and the interface between Py and Oc (Py-Oc) laminae. Results showed that the tensile strength was in the range 0.43–8.22 MPa, mainly in the order of Cal > Py > Cal-Oc > Py-Oc > Oc. The modes of fracture morphology were highly related to the occurrence, continuity, and mineralogy fillings of laminae. Shear strength parameters were within the range 22.50–29.64 MPa for cohesion and 37.29–43.60° for internal friction angle. Fracture surface roughness was strongly related to its cohesion. Calcite laminae considerably influenced the tensile fracturing of shale, suggesting that the geometry and properties of calcite lamina should receive more attention during the design of shale gas exploration.

Shear Strength of Sand–Clay Interfaces Through Large-Scale Direct Shear Tests

2020 ◽  
Vol 45 (5) ◽  
pp. 4343-4357
Author(s):  
Zhong-Liang Zhang ◽  
Zhen-Dong Cui ◽  
Ling-Zi Zhao
Keyword(s):  
Shear Strength ◽  
Large Scale ◽  
Direct Shear ◽  
Shear Tests ◽  
Direct Shear Tests
Sign in / Sign up

Export Citation Format

Share Document