scholarly journals Assessment of the quality of groundwater and the Little Wind River in the area of a former uranium processing facility on the Wind River Reservation, Wyoming, 1987 through 2010

2014 ◽  
Author(s):  
Anthony J. Ranalli ◽  
David L. Naftz
Keyword(s):  
Processing Facility ◽  
Wind River Reservation

scholarly journals Business Process Analysis: A case of Primary Shrimp Processor

2018 ◽  
Vol 4 (2) ◽  
pp. 162
Author(s):  
Worakant Yupensuk ◽  
Pornthipa Ongkunaruk
Keyword(s):  
Supply Chain ◽  
Business Process ◽  
Process Analysis ◽  
High Volume ◽  
Control Material ◽  
Business Process Analysis ◽  
Processing Facility ◽  
Increasing Trend ◽  
Shrimp Industry

Shrimp industry is important for Thai economy due to high volume of export. However, there is an increasing trend in shrimp consumption in domestic market as well. Our objective is to study the current supply chain of a medium sized primary shrimp processor in Samut Sakhon province. First, we analyze its business process and identify the problems and propose the improvement. The business process is analyzed by using Integration Definition for Function Modeling (IDEF0) to illustrate major activities in the current situation of primary processing facility. Next, we propose guidelines to improve efficiency in each activity. We found that the temperature control material of shrimp during production is ice since it is convenient and need low investment. In summary, the appropriate material to control the temperature is important to minimize cost and maintain the quality of shrimp. In addition, the proper production processes can increase the productivity. Keywords: Business Process Analysis; IDEF; Shrimp; Supply Chain Management

Bacteriological Profile of Raw, Frozen Chicken Nuggets

2008 ◽  
Vol 71 (3) ◽  
pp. 613-615 ◽  
Author(s):  
SOFRONI EGLEZOS ◽  
GARY A. DYKES ◽  
BIXING HUANG ◽  
NARELLE FEGAN ◽  
ED STUTTARD
Keyword(s):  
Plate Count ◽  
Chicken Nuggets ◽  
E Coli ◽  
Bacteriological Profile ◽  
Processing Facility ◽  
Plate Counts ◽  
The Mean ◽  
Aerobic Plate Count ◽  
Number Of Bacteria

The bacteriological profile of raw, frozen chicken nuggets manufactured at a chicken processing facility in Queensland, Australia, was determined. Chicken nuggets are manufactured by grinding poultry, adding premixes to incorporate spices, forming the meat to the desired size and shape, applying a batter and breading, freezing, and packaging. A total of 300 frozen batches were analyzed for aerobic plate count, Escherichia coli, and Salmonella over a period of 4 years. The mean of the aerobic plate count was 5.4 log CFU/g, and counts at the 90th, 95th, and 99th percentiles were 5.7, 5.9, and 6.5 log CFU/g, respectively. The maximum number of bacteria detected was 6.6 log CFU/g. E. coli prevalence was 47%, and of the positive samples, the mean was 1.9 log CFU/g; counts at the 90th, 95th, and 99th percentiles were 2.3, 2.4, and 2.8 log CFU/g, respectively. The maximum number of E. coli was 2.9 log CFU/g. The Salmonella prevalence was 8.7%, and 57.7% of these isolates were typed as Salmonella subspecies II 4,12,[27]:b:[e,n,x] (Sofia), a low-virulence serotype well adapted to Australian poultry flocks. There was a significant relationship (P < 0.05) between season and both aerobic plate counts and E. coli counts, and no correlation between E. coli counts and Salmonella prevalence. This study provides valuable data on the bacteriological quality of raw, frozen chicken nuggets.

scholarly journals Development of agro-industrial eco-model (aicem) for production of raw coconut jelly sector in Mekong Delta

2019 ◽  
Vol 3 (2) ◽  
pp. 66-74
Author(s):  
Tran Thi Hieu ◽  
Le Thanh Hai ◽  
Tra Van Tung ◽  
Le Quoc Vi ◽  
Nguyen Thi Phuong Thao ◽  
...  
Keyword(s):  
Current Model ◽  
Mekong Delta ◽  
Scientific Basis ◽  
Production Costs ◽  
Production Model ◽  
Treated Wastewater ◽  
Quality Of Water ◽  
Processing Facility ◽  
Set Up

The argo-industrial model producing of closed ecosystem in Mekong Delta is a development in the world. In this paper, the construction method outlined criteria identifys for the agro-industrial production model toward dual-closed ecological direction for coconut jelly processing facility. Set up criteria determines the impacts of production technology, the efficiency of using energy and natural resources, sustainable livelihoods, and the replicability of the model that will affect on the sustainability of the model. The research methodology was based on the results of surveys, investigation, and assessment of current model, and identifying a scientific basis for the set up criteria. Based on that, set up criteria was propose and application for a coconut jelly processing facility for Nguyen Thanh Trung household in Nhon Thanh commnune, Ben Tre city, Ben Tre province and recommend the solution for completed model based on eco-technique and closed matter & energy line. The results of the model meet all the requirements of the set up criteria. The quality of water supply meets the standards for coconut jelly processing. Treated wastewater by aquatic plants system meets the standard for wastewater discharges into the water resource. Water comsumption was saved and reduced the greenhouse gas emissions from burning wood for coconut jelly processing. The production costs were saved, resulting increasing income for household. This is pilot the perfected model to expand to other facilities.

Immunoferritin localization of intracellular antigens in positively stained frozen sections

1978 ◽  
Vol 36 (2) ◽  
pp. 168-169
Author(s):  
K. T. Tokuyasu
Keyword(s):  
Surface Tension ◽  
Water Surface ◽  
Thin Layers ◽  
The Other ◽  
Positive Staining ◽  
Frozen Sections ◽  
The Past ◽  
Ultrathin Frozen Sections ◽  
Definition Of

During the past investigations of immunoferritin localization of intracellular antigens in ultrathin frozen sections, we found that the degree of negative staining required to delineate u1trastructural details was often too dense for the recognition of ferritin particles. The quality of positive staining of ultrathin frozen sections, on the other hand, has generally been far inferior to that attainable in conventional plastic embedded sections, particularly in the definition of membranes. As we discussed before, a main cause of this difficulty seemed to be the vulnerability of frozen sections to the damaging effects of air-water surface tension at the time of drying of the sections.Indeed, we found that the quality of positive staining is greatly improved when positively stained frozen sections are protected against the effects of surface tension by embedding them in thin layers of mechanically stable materials at the time of drying (unpublished).

Lithography below 100 nm

1983 ◽  
Vol 41 ◽  
pp. 96-99
Author(s):  
L. D. Jackel
Keyword(s):  
Spatial Distribution ◽  
Electron Beam ◽  
Electron Scattering ◽  
Electron Beam Lithography ◽  
Substrate Material ◽  
Local Electron ◽  
Electron Dose ◽  
Positive Resist ◽  
Exposure Process

Most production electron beam lithography systems can pattern minimum features a few tenths of a micron across. Linewidth in these systems is usually limited by the quality of the exposing beam and by electron scattering in the resist and substrate. By using a smaller spot along with exposure techniques that minimize scattering and its effects, laboratory e-beam lithography systems can now make features hundredths of a micron wide on standard substrate material. This talk will outline sane of these high- resolution e-beam lithography techniques.We first consider parameters of the exposure process that limit resolution in organic resists. For concreteness suppose that we have a “positive” resist in which exposing electrons break bonds in the resist molecules thus increasing the exposed resist's solubility in a developer. Ihe attainable resolution is obviously limited by the overall width of the exposing beam, but the spatial distribution of the beam intensity, the beam “profile” , also contributes to the resolution. Depending on the local electron dose, more or less resist bonds are broken resulting in slower or faster dissolution in the developer.

Convergent Beam Electron Diffraction

1978 ◽  
Vol 36 (3) ◽  
pp. 304-315
Author(s):  
G. Lehmpfuhl
Keyword(s):  
Electron Diffraction ◽  
Diffraction Pattern ◽  
Crystal Surface ◽  
Diffraction Spot ◽  
Crystal Thickness ◽  
Large Area ◽  
Electron Microscopic ◽  
Additional Information ◽  
Microscopic Investigations

Introduction In electron microscopic investigations of crystalline specimens the direct observation of the electron diffraction pattern gives additional information about the specimen. The quality of this information depends on the quality of the crystals or the crystal area contributing to the diffraction pattern. By selected area diffraction in a conventional electron microscope, specimen areas as small as 1 µ in diameter can be investigated. It is well known that crystal areas of that size which must be thin enough (in the order of 1000 Å) for electron microscopic investigations are normally somewhat distorted by bending, or they are not homogeneous. Furthermore, the crystal surface is not well defined over such a large area. These are facts which cause reduction of information in the diffraction pattern. The intensity of a diffraction spot, for example, depends on the crystal thickness. If the thickness is not uniform over the investigated area, one observes an averaged intensity, so that the intensity distribution in the diffraction pattern cannot be used for an analysis unless additional information is available.

Observability of Very Thick Specimen by Using Transmission Scanning Electron Microscope

1971 ◽  
Vol 29 ◽  
pp. 26-27
Author(s):  
K. Shibatomi ◽  
T. Yamanoto ◽  
H. Koike
Keyword(s):  
Electron Microscope ◽  
Image Quality ◽  
Scanning Electron Microscope ◽  
Chromatic Aberration ◽  
Image Contrast ◽  
Objective Lens ◽  
Thick Specimen ◽  
Transmission Electron ◽  
Scanning Electron

In the observation of a thick specimen by means of a transmission electron microscope, the intensity of electrons passing through the objective lens aperture is greatly reduced. So that the image is almost invisible. In addition to this fact, it have been reported that a chromatic aberration causes the deterioration of the image contrast rather than that of the resolution. The scanning electron microscope is, however, capable of electrically amplifying the signal of the decreasing intensity, and also free from a chromatic aberration so that the deterioration of the image contrast due to the aberration can be prevented. The electrical improvement of the image quality can be carried out by using the fascionating features of the SEM, that is, the amplification of a weak in-put signal forming the image and the descriminating action of the heigh level signal of the background. This paper reports some of the experimental results about the thickness dependence of the observability and quality of the image in the case of the transmission SEM.

The Current Situation in Chemical Stabilization of Biological Materials

1972 ◽  
Vol 30 ◽  
pp. 132-133
Author(s):  
John H. Luft
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
Osmium Tetroxide ◽  
Molecular Level ◽  
Cross Linking ◽  
Chemical Stabilization ◽  
Specimen Preparation ◽  
Sufficient Condition ◽  
Radio Telescopes

With information processing devices such as radio telescopes, microscopes or hi-fi systems, the quality of the output often is limited by distortion or noise introduced at the input stage of the device. This analogy can be extended usefully to specimen preparation for the electron microscope; fixation, which initiates the processing sequence, is the single most important step and, unfortunately, is the least well understood. Although there is an abundance of fixation mixtures recommended in the light microscopy literature, osmium tetroxide and glutaraldehyde are favored for electron microscopy. These fixatives react vigorously with proteins at the molecular level. There is clear evidence for the cross-linking of proteins both by osmium tetroxide and glutaraldehyde and cross-linking may be a necessary if not sufficient condition to define fixatives as a class.

Sign in / Sign up

Export Citation Format

Share Document