scholarly journals Hydration Heat and Autogenous Shrinkage of High-Strength Mass Concrete

2009 ◽  
Vol 8 (2) ◽  
pp. 509-516 ◽  
Author(s):  
Gyuyong Kim ◽  
Euibae Lee ◽  
Kyungmo Koo
Keyword(s):  
Autogenous Shrinkage ◽  
High Strength ◽  
Hydration Heat ◽  
Mass Concrete

Properties of Autogenous Shrinkage in High-Strength Mass Concrete According to Hydration Heat Velocity

2011 ◽  
Vol 311-313 ◽  
pp. 1993-1999
Author(s):  
Kyung Mo Koo ◽  
Gyu Yong Kim ◽  
Hiroyuki Miyauchi ◽  
Yeon Woo Kang
Keyword(s):  
Autogenous Shrinkage ◽  
High Strength ◽  
Hydration Heat ◽  
Early Age ◽  
Mass Concrete ◽  
Close Relationship

The early-age properties and relationships between hydration heat and autogenous shrinkage in high-strength mass concrete are investigated through analysis of the history curves of hydration heat and autogenous shrinkage. To reduce the hydration heat velocity, micro encapsulated retarder (MR) that could retard cement reaction was applied. In the result of research, the hydration temperature and hydration heat velocity of high-strength mass concrete can be decreased with the reduction of size specimen and use of the retarder. A close relationship could be found between the hydration temperature and autogenous shrinkage; the higher the hydration heat velocity, the higher the autogenous shrinkage velocity and the greater the ultimate autogenous shrinkage.

Analysis of hydration heat and autogenous shrinkage of high-strength mass concrete

2011 ◽  
Vol 63 (5) ◽  
pp. 377-389 ◽  
Author(s):  
Gyu-Yong Kim ◽  
Eui-Bae Lee ◽  
Jeong-Soo Nam ◽  
Kyung-Mo Koo
Keyword(s):  
Autogenous Shrinkage ◽  
High Strength ◽  
Hydration Heat ◽  
Mass Concrete

scholarly journals Autogenous Shrinkage, Strength, and Hydration Heat of Ultra-High-Strength Paste Incorporating Nano-Zirconium Dioxide

2020 ◽  
Vol 12 (22) ◽  
pp. 9372
Author(s):  
Guang-Zhu Zhang ◽  
Han-Seung Lee ◽  
Xiao-Yong Wang
Keyword(s):  
Relative Humidity ◽  
Room Temperature ◽  
Autogenous Shrinkage ◽  
High Strength ◽  
Hydration Heat ◽  
Experimental Device ◽  
Hydration Reaction ◽  
Hydration Products ◽  
Internal Relative Humidity ◽  
Two Stages

Ultra-high-strength paste (UHSP) combined with nanomaterials has been extensively studied. However, the research on nano-ZrO2 is limited. In this study, UHSP with various nano-ZrO2 contents is analyzed. The motivation of this study is to clarify the effects of nano-ZrO2 on the hydration products, strength, autogenous shrinkage, and hydration heat of UHSPs. The water-to-binder ratio (w/b) of the specimens is 0.2. The nano-ZrO2 content is 0, 1.5, and 3 wt.%. The strength is measured at the age of 3, 7, and 28 days. The hydration heat is measured from the mixing stage to 3 days. The hydration products are analyzed by X-ray diffraction (XRD) and thermogravimetric analysis (TG). The autogenous shrinkage is measured from the mixing stage for 7 days using a new experimental device. The new experimental device can measure autogenous shrinkage, internal relative humidity, and internal temperature simultaneously. The following conclusions can be drawn based on the experimental studies: (1) Two stages were noticed in the autogenous shrinkage of UHSPs: a variable-temperature stage and a room-temperature stage. The cut-off point of these two stages occurred in roughly 1.5 days. Furthermore, in the room-temperature stage, there was a straight-line relationship between the autogenous shrinkage and internal relative humidity. (2) With the increase of the nano-ZrO2 amount, the compressive strength at 3 days, 7 days, and 4 weeks increased. (3) With the nano-ZrO2 increasing, the flow decreased. (4) With the nano-ZrO2 increasing, the hydration heat increased due to the physical nucleation effect of the nano-ZrO2. Furthermore, the nano-ZrO2 used in this study was chemically inert and did not take part in the cement hydration reaction based on the XRD, differential thermal, and TG data. This paper is of great significance for the development of high-strength cementitious materials doped with nano-ZrO2.

scholarly journals Properties of Autogenous Shrinkage according to Hydration Heat Velocity of High Strength Concrete Considering Mass Member

2012 ◽  
Vol 12 (4) ◽  
pp. 369-376
Author(s):  
Kyung-Mo Koo ◽  
Gyu-Yong Kim ◽  
Sung-Hyun Hong ◽  
Jeong-Soo Nam ◽  
Kyoung-Su Shin ◽  
...  
Keyword(s):  
High Strength Concrete ◽  
Autogenous Shrinkage ◽  
High Strength ◽  
Hydration Heat ◽  
Strength Concrete

scholarly journals The Hydration, Mechanical, Autogenous Shrinkage, Durability, and Sustainability Properties of Cement–Limestone–Slag Ternary Composites

2021 ◽  
Vol 13 (4) ◽  
pp. 1881
Author(s):  
Mei-Yu Xuan ◽  
Yi Han ◽  
Xiao-Yong Wang
Keyword(s):  
Compressive Strength ◽  
Electrical Resistivity ◽  
Experimental Studies ◽  
Autogenous Shrinkage ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Hydration Heat ◽  
Granulated Blast Furnace Slag ◽  
Binder Ratio

This study examines the hydration–mechanical–autogenous shrinkage–durability–sustainability properties of ternary composites with limestone filler (LF) and ground-granulated blast furnace slag (BFS). Four mixtures were prepared with a water/binder ratio of 0.3 and different replacement ratios varying from 0 to 45%. Multiple experimental studies were performed at various ages. The experimental results are summarized as follows: (1) As the replacement levels increased, compressive strength and autogenous shrinkage (AS) decreased, and this relationship was linear. (2) As the replacement levels increased, cumulative hydration heat decreased. At the age of 3 and 7 days, there was a linear relationship between compressive strength and cumulative hydration heat. (3) Out of all mixtures, the ultrasonic pulse velocity (UPV) and electrical resistivity exhibited a rapid increase in the early stages and tended to slow down in the latter stages. There was a crossover of UPV among various specimens. In the later stages, the electrical resistivity of ternary composite specimens was higher than plain specimens. (4) X-ray diffraction (XRD) results showed that LF and BFS have a synergistic effect. (5) With increasing replacement ratios, the CO2 emissions per unit strength reduced, indicating the sustainability of ternary composites.

Sign in / Sign up

Export Citation Format

Share Document