scholarly journals The miscibility of Calcium Silicate Perovskite and Bridgmanite: A single phase perovskite in hot, iron-rich regions

2020 ◽  
Author(s):  
Joshua Muir ◽  
Feiwu Zhang
Keyword(s):  
Calcium Silicate ◽  
Single Phase ◽  
Calcium Silicate Perovskite

Phosphate recovery from wastewater using calcium silicate hydrate (C-S-H): sonochemical synthesis and properties

2019 ◽  
Vol 5 (1) ◽  
pp. 131-139 ◽  
Author(s):  
Zhihao Zhang ◽  
Xuejiang Wang ◽  
Jianfu Zhao
Keyword(s):  
Calcium Silicate ◽  
Calcium Silicate Hydrate ◽  
Room Temperature ◽  
Single Phase ◽  
Sonochemical Method ◽  
Sonochemical Synthesis ◽  
Phosphate Recovery

We developed a novel sonochemical method for the synthesis of single-phase C-S-H at room temperature and investigated the structure and phosphate recovery properties of C-S-H.

Influence of Heat Treatments on Microstructures in an Fe-Co-V Alloy

1974 ◽  
Vol 32 ◽  
pp. 512-513
Author(s):  
S. Mahajan ◽  
M. R. Pinnel ◽  
J. E. Bennett
Keyword(s):  
Single Phase ◽  
Alloy Composition ◽  
Supersaturated Solid Solution ◽  
Cell Formation ◽  
Heat Treatments ◽  
Air Cooling ◽  
Iced Brine ◽  
Transmission Electron ◽  
The Matrix ◽  
Bcc Structure

The microstructural changes in an Fe-Co-V alloy (composition by wt.%: 2.97 V, 48.70 Co, 47.34 Fe and balance impurities, such as C, P and Ni) resulting from different heat treatments have been evaluated by optical metallography and transmission electron microscopy. Results indicate that, on air cooling or quenching into iced-brine from the high temperature single phase ϒ (fcc) field, vanadium can be retained in a supersaturated solid solution (α2) which has bcc structure. For the range of cooling rates employed, a portion of the material appears to undergo the γ-α2 transformation massively and the remainder martensitically. Figure 1 shows dislocation topology in a region that may have transformed martensitically. Dislocations are homogeneously distributed throughout the matrix, and there is no evidence for cell formation. The majority of the dislocations project along the projections of <111> vectors onto the (111) plane, implying that they are predominantly of screw character.

Raman And Fluorescence Spectra Observed in Laser Microprobe Measurements of Several Compositions in the Ln-Ba-Cu-O System

1990 ◽  
Vol 48 (2) ◽  
pp. 278-279
Author(s):  
Edgar S. Etz ◽  
Thomas D. Schroeder ◽  
Winnie Wong-Ng
Keyword(s):  
Fluorescence Spectra ◽  
Single Phase ◽  
X Ray Diffraction ◽  
Ceramic Powders ◽  
Conventional Solid State Reaction ◽  
X Ray ◽  
Raman Microprobe ◽  
Methods Of Synthesis ◽  
Compositional Homogeneity ◽  
Processing Techniques

We are investigating by Raman microprobe measurements the superconducting and related phases in the LnBa2Cu3O7-x (for x=0 to 1) system where yttrium has been replaced by several of the lanthanide (Ln = Nd,Sm,Eu,Ho,Er) elements. The aim is to relate the observed optical spectra (Raman and fluorescence) to the compositional and structural properties of these solids as part of comprehensive materials characterization. The results are correlated with the methods of synthesis, the processing techniques of these materials, and their superconducting properties. Of relevance is the substitutional chemistry of these isostructural systems, the differences in the spectra, and their microanalytical usefulness for the detection of impurity phases, and the assessment of compositional homogeneity. The Raman spectra of most of these compounds are well understood from accounts in the literature.The materials examined here are mostly ceramic powders prepared by conventional solid state reaction techniques. The bulk samples are of nominally single-phase composition as determined by x-ray diffraction.

Observation of pseudo 10-fold symmetry in the ordered iron-zinc delta phase

1992 ◽  
Vol 50 (1) ◽  
pp. 36-37
Author(s):  
L. A. Giannuzzi ◽  
A. S. Ramani ◽  
P. R. Howell ◽  
H. W. Pickering ◽  
W. R. Bitler
Keyword(s):  
Single Phase ◽  
X Ray Diffraction ◽  
Rich Region ◽  
Average Cell ◽  
X Ray ◽  
Delta Phase ◽  
Cell Dimensions ◽  
Δ Phase ◽  
Morphological Differences ◽  
Concentration Discontinuity

The δ phase is a Zn-rich intermetallic, having a composition range of ∼ 86.5 - 92.0 atomic percent Zn, and is stable up to 665°C. The stoichiometry of the δ phase has been reported as FeZn7 and FeZn10 The deviation in stoichiometry can be attributed to variations in alloy composition used by each investigator. The structure of the δ phase, as determined by powder x-ray diffraction, is hexagonal (P63mc or P63/mmc) with cell dimensions a = 1.28 nm, c = 5.76 nm, and 555±8 atoms per unit cell. Later work suggested that the layer produced by hot-dip galvanizing should be considered as two distinct phases which are characterized by their morphological differences, namely: the iron-rich region with a compact appearance (δk) and the zinc-rich region with a columnar or palisade microstructure (δp). The sub-division of the δ phase was also based on differences in diffusion behavior, and a concentration discontinuity across the δp/δk boundary. However, work utilizing Weisenberg photographs on δ single crystals reported that the variation in lattice parameters with composition was small and hence, structurally, the δk phase and the δp phase were the same and should be thought of as a single phase, δ. Bastin et al. determined the average cell dimensions to be a = 1.28 nm and c = 5.71 nm, and suggested that perhaps some kind of ordering process, which would not be observed by x-ray diffraction, may be responsible for the morphological differences within the δ phase.

A TEM study of the influence of microstructure on the superplastic behavior of a U-5.8 wt.% Nb alloy

1986 ◽  
Vol 44 ◽  
pp. 568-569
Author(s):  
G. Mackiewicz Ludtka
Keyword(s):  
Grain Size ◽  
Heating Rate ◽  
Phase Field ◽  
Single Phase ◽  
Superplastic Behavior ◽  
Two Phase ◽  
Single Phase Field

Historically, metals exhibit superplasticity only while forming in a two-phase field because a two-phase microstructure helps ensure a fine, stable grain size. In the U-5.8 Nb alloy, superplastici ty exists for up to 2 h in the single phase field (γ1) at 670°C. This is above the equilibrium monotectoid temperature of 647°C. Utilizing dilatometry, the superplastic (SP) U-5.8 Nb alloy requires superheating to 658°C to initiate the α+γ2 → γ1 transformation at a heating rate of 1.5°C/s. Hence, the U-5.8 Nb alloy exhibits an anomolous superplastic behavior.

Sign in / Sign up

Export Citation Format

Share Document