scholarly journals Pengaruh Standar Lantanum Terhadap Validasi Metode Pengukuran Neodimium dan Serium Menggunakan X-Ray Fluorescence (XRF)

2021 ◽  
Vol 2020 ◽  
pp. 115-122
Author(s):  
Rosika Kriswarini ◽  
Erlina Noerpitasari ◽  
Noviarty Noviarty ◽  
Sutri Indaryati ◽  
Arif Nugroho
Keyword(s):  
X Ray

Space and Time Distribution of Hard X-Ray Emission in a Loop at the Beginning of a Flare

1994 ◽  
Vol 144 ◽  
pp. 275-277
Author(s):  
M. Karlický ◽  
J. C. Hénoux
Keyword(s):  
Time Distribution ◽  
Electron Bombardment ◽  
Spatial Evolution ◽  
Superthermal Electrons ◽  
Flare Loop ◽  
X Ray ◽  
Superthermal Electron ◽  
Flare Loops ◽  
Chromospheric Evaporation ◽  
Temporal And Spatial

AbstractUsing a new ID hybrid model of the electron bombardment in flare loops, we study not only the evolution of densities, plasma velocities and temperatures in the loop, but also the temporal and spatial evolution of hard X-ray emission. In the present paper a continuous bombardment by electrons isotropically accelerated at the top of flare loop with a power-law injection distribution function is considered. The computations include the effects of the return-current that reduces significantly the depth of the chromospheric layer which is evaporated. The present modelling is made with superthermal electron parameters corresponding to the classical resistivity regime for an input energy flux of superthermal electrons of 109erg cm−2s−1. It was found that due to the electron bombardment the two chromospheric evaporation waves are generated at both feet of the loop and they propagate up to the top, where they collide and cause temporary density and hard X-ray enhancements.

Some Problems in Understanding the Solar Corona

1994 ◽  
Vol 144 ◽  
pp. 1-9
Author(s):  
A. H. Gabriel
Keyword(s):  
Solar Corona ◽  
Solar Atmosphere ◽  
Theoretical Modelling ◽  
Total System ◽  
Major Advance ◽  
X Ray ◽  
Proper Perspective ◽  
Space Observations

The development of the physics of the solar atmosphere during the last 50 years has been greatly influenced by the increasing capability of observations made from space. Access to images and spectra of the hotter plasma in the UV, XUV and X-ray regions provided a major advance over the few coronal forbidden lines seen in the visible and enabled the cooler chromospheric and photospheric plasma to be seen in its proper perspective, as part of a total system. In this way space observations have stimulated new and important advances, not only in space but also in ground-based observations and theoretical modelling, so that today we find a well-balanced harmony between the three techniques.

White-Light Coronal Structures: Streamers and CMEs

1994 ◽  
Vol 144 ◽  
pp. 82
Author(s):  
E. Hildner
Keyword(s):  
Emission Line ◽  
Electron Density ◽  
White Light ◽  
Coronal Mass Ejections ◽  
X Rays ◽  
Solar Cycles ◽  
Temperature Function ◽  
X Ray ◽  
Eclipse Observations ◽  
Coronal Structures

AbstractOver the last twenty years, orbiting coronagraphs have vastly increased the amount of observational material for the whitelight corona. Spanning almost two solar cycles, and augmented by ground-based K-coronameter, emission-line, and eclipse observations, these data allow us to assess,inter alia: the typical and atypical behavior of the corona; how the corona evolves on time scales from minutes to a decade; and (in some respects) the relation between photospheric, coronal, and interplanetary features. This talk will review recent results on these three topics. A remark or two will attempt to relate the whitelight corona between 1.5 and 6 R⊙to the corona seen at lower altitudes in soft X-rays (e.g., with Yohkoh). The whitelight emission depends only on integrated electron density independent of temperature, whereas the soft X-ray emission depends upon the integral of electron density squared times a temperature function. The properties of coronal mass ejections (CMEs) will be reviewed briefly and their relationships to other solar and interplanetary phenomena will be noted.

Iron K-Line Emission from X-Ray Binaries

1988 ◽  
Vol 102 ◽  
pp. 47-50
Author(s):  
K. Masai ◽  
S. Hayakawa ◽  
F. Nagase
Keyword(s):  
Accretion Disk ◽  
Radiative Recombination ◽  
Characteristic Temperature ◽  
Line Emission ◽  
Ionization Front ◽  
Continuum Radiation ◽  
X Ray ◽  
Low Mass ◽  
X Ray Binaries

AbstractEmission mechanisms of the iron Kα-lines in X-ray binaries are discussed in relation with the characteristic temperature Txof continuum radiation thereof. The 6.7 keV line is ascribed to radiative recombination followed by cascades in a corona of ∼ 100 eV formed above the accretion disk. This mechanism is attained for Tx≲ 10 keV as observed for low mass X-ray binaries. The 6.4 keV line observed for binary X-ray pulsars with Tx> 10 keV is likely due to fluorescence outside the He II ionization front.

Diagnostics of Gold Laser Plasmas

1988 ◽  
Vol 102 ◽  
pp. 357-360
Author(s):  
J.C. Gauthier ◽  
J.P. Geindre ◽  
P. Monier ◽  
C. Chenais-Popovics ◽  
N. Tragin ◽  
...  
Keyword(s):  
Experimental Results ◽  
Pure Gold ◽  
Electronic Temperature ◽  
X Ray ◽  
Laser Plasmas ◽  
Collisional Radiative Model ◽  
Radiative Model

AbstractIn order to achieve a nickel-like X ray laser scheme we need a tool to determine the parameters which characterise the high-Z plasma. The aim of this work is to study gold laser plasmas and to compare experimental results to a collisional-radiative model which describes nickel-like ions. The electronic temperature and density are measured by the emission of an aluminium tracer. They are compared to the predictions of the nickel-like model for pure gold. The results show that the density and temperature can be estimated in a pure gold plasma.

Axial Observation of X-Ray Spectra from a Beam-Foil Source

1988 ◽  
Vol 102 ◽  
pp. 339-342
Author(s):  
J.M. Laming ◽  
J.D. Silver ◽  
R. Barnsley ◽  
J. Dunn ◽  
K.D. Evans ◽  
...  
Keyword(s):  
Spectral Resolution ◽  
Heavy Ion ◽  
Ion Beams ◽  
Beam Axis ◽  
Doppler Broadening ◽  
X Ray ◽  
Beam Foil

AbstractNew observations of x-ray spectra from foil-excited heavy ion beams are reported. By observing the target in a direction along the beam axis, an improvement in spectral resolution, δλ/λ, by about a factor of two is achieved, due to the reduced Doppler broadening in this geometry.

Observed and Theoretical Spectra in the 10–100Å Interval

1988 ◽  
Vol 102 ◽  
pp. 259-261
Author(s):  
W.A. Brown ◽  
M.E. Bruner ◽  
L.W. Acton
Keyword(s):  
Sounding Rocket ◽  
Full Spectrum ◽  
X Ray

AbstractThe soft x-ray spectra recorded in two sounding rocket flights in 1982 and 1985 are compared with with predicted spectra. The poster presents the processed densitometer trace of the full spectrum together with the new spectrum from the 1985 experiment. This note compares the intensities of the lines with predictions.

Quaternary structure of Limulus polyphemus hemocyanin

1978 ◽  
Vol 36 (2) ◽  
pp. 176-177
Author(s):  
T. Wichertjes ◽  
E.J. Kwak ◽  
E.F.J. Van Bruggen
Keyword(s):  
Electron Microscopy ◽  
Functional Properties ◽  
Horseshoe Crab ◽  
Temperature Jump ◽  
Quaternary Structure ◽  
Crystallographic Analysis ◽  
Limulus Polyphemus ◽  
Oxygen Binding ◽  
X Ray ◽  
Intact Molecule

Hemocyanin of the horseshoe crab (Limulus polyphemus) has been studied in nany ways. Recently the structure, dissociation and reassembly was studied using electron microscopy of negatively stained specimens as the method of investigation. Crystallization of the protein proved to be possible and X-ray crystallographic analysis was started. Also fluorescence properties of the hemocyanin after dialysis against Tris-glycine buffer + 0.01 M EDTA pH 8.9 (so called “stripped” hemocyanin) and its fractions II and V were studied, as well as functional properties of the fractions by NMR. Finally the temperature-jump method was used for assaying the oxygen binding of the dissociating molecule and of preparations of isolated subunits. Nevertheless very little is known about the structure of the intact molecule. Schutter et al. suggested that the molecule possibly consists of two halves, combined in a staggered way, the halves themselves consisting of four subunits arranged in a square.

Chemical partitioning of elements in Ni-base MC-carbide reinforced eutetic superalloys

1983 ◽  
Vol 41 ◽  
pp. 250-251
Author(s):  
E. F. Koch ◽  
E. L. Hall ◽  
S. W. Yang
Keyword(s):  
Alloy Composition ◽  
Volume Fraction ◽  
Lattice Mismatch ◽  
Turbine Blades ◽  
Eutectic Alloys ◽  
Alloy Matrix ◽  
X Ray ◽  
Gas Turbine Blades ◽  
Analytical Electron ◽  
Analytical Electron Microscope

The plane-front solidified eutectic alloys consisting of aligned tantalum monocarbide fibers in a nickel alloy matrix are currently under consideration for future aircraft and gas turbine blades. The MC fibers provide exceptional strength at high temperatures. In these alloys, the Ni matrix is strengthened by the precipitation of the coherent γ' phase (ordered L12 structure, nominally Ni3Al). The mechanical strength of these materials can be sensitively affected by overall alloy composition, and these strength variations can be due to several factors, including changes in solid solution strength of the γ matrix, changes in they γ' size or morphology, changes in the γ-γ' lattice mismatch or interfacial energy, or changes in the MC morphology, volume fraction, thermal stability, and stoichiometry. In order to differentiate between these various mechanisms, it is necessary to determine the partitioning of elemental additions between the γ,γ', and MC phases. This paper describes the results of such a study using energy dispersive X-ray spectroscopy in the analytical electron microscope.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Sign in / Sign up

Export Citation Format

Share Document