The Effect of a Uniform Stationary Temperature Field on the Stress-Strain State of Elastomers under Static Large Deformations

2019 ◽  
Vol 54 (8) ◽  
pp. 1240-1249
Author(s):  
B. A. Zhukov
Keyword(s):  
Temperature Field ◽  
Strain State ◽  
Large Deformations ◽  
Stress Strain ◽  
Stationary Temperature Field ◽  
Stress Strain State

Simulating the stress–strain state of a thin plate after a thermal shock

2021 ◽  
Author(s):  
A. V. Sedelnikov ◽  
S. V. Glushkov ◽  
V. V. Serdakova ◽  
M. A. Evtushenko ◽  
E. S. Khnyryova
Keyword(s):  
Temperature Field ◽  
Thermal Shock ◽  
Thin Plate ◽  
Strain State ◽  
Stress Strain ◽  
Homogeneous Plate ◽  
Stress Strain State ◽  
The Impact ◽  
Elastic Elements

The paper is devoted to simulating the impact of a thermal shock on a thin homogeneous plate in the ANSYS package. The assessment of the stress–strain state is carried out and the dynamics of changes in the temperature field of the plate is determined. The obtained results were compared with the data of other authors and can be used when taking into account the thermal shock of large elastic elements of spacecraft.

scholarly journals Specific features of thermal deforming of composite inductors during magnetic-pulse processing of materials

2021 ◽  
pp. 127-130
Author(s):  
Galina Ottovna Anishchenko ◽  
Vladimir Ivanovich Konokhov ◽  
Denis Vladimirovich Lavinsky
Keyword(s):  
Electromagnetic Field ◽  
Temperature Field ◽  
Strain State ◽  
Nonlinear Effects ◽  
Magnetic Pulse ◽  
The Finite Element Method ◽  
Stress Strain ◽  
Pulse Processing ◽  
Stress Strain State ◽  
Field Temperature

The problem of taking into account a non-stationary inhomogeneous temperature field in the analysis of the stress-strain state of inductor systems for magnetic-pulse processing of materials is considered. It follows from the analysis of open information sources that the problem of analyzing a non-stationary temperature field arising from the presence of a non-uniform electromagnetic field and its effect on deformation has been sufficiently studied in relation to induction heating. At the same time, during other operations of magnetic-pulse processing of materials, heating of equipment can cause additional deformations of a significant magnitude, which, in turn, can lead to a loss of equipment performance due to destruction or irreversible deformation. A general approach to the analysis of such problems is proposed, which involves the determination of the spatial-temporal distributions of the quantitative characteristics of the electromagnetic field, temperature field and stress-strain state. The necessity of using numerical methods for carrying out such an analysis has been substantiated. The most effective numerical method is the finite element method, which makes it possible to analyze the unsteady electromagnetic field, temperature field, and stress-strain state within the same calculation scheme. In this case, within the framework of the finite element method, iterative schemes can be created that allow taking into account nonlinear effects. Here, nonlinear effects can be due to the dependence of the mechanical and electro-physical properties of the material on temperature, the plastic nature of deformation, and the need to take into account contact phenomena. The results of complex analysis for a composite single-turn inductor with a dielectric band are presented. The features of contact interaction were taken into account by introducing layers of contact finite elements. The stress-strain state of the inductor is estimated for two variants of the materials used: copper and non-magnetic steel.    

scholarly journals Measuring the Temperature and Stress-Strain States of a Tube Sample under the Local Stochastic Temperature Pulsations

2019 ◽  
Vol 10 (1) ◽  
pp. 53-60
Author(s):  
S. M. Dmitriev ◽  
R. R. Ryazapov ◽  
A. V. Mamaev ◽  
A. E. Sobornov ◽  
A. V. Kotin ◽  
...  
Keyword(s):  
Temperature Field ◽  
Nuclear Power ◽  
Strain State ◽  
Technical Problem ◽  
Coolant Flow ◽  
Stress Strain ◽  
Spectral Correlation ◽  
Stress Strain State ◽  
Study Results ◽  
Temperature Pulsations

Provding a high level of durability of heat exchange equipment of water-cooled reactors under local stochastic temperature pulsations is an important scientific and technical problem for the nuclear power industry. Temperature pulsations produced by mixing non-isothermal coolant flows with high temperature gradient are most dangerous. This work is an experimental study of temperature and stress-strain state of a tube sample under local stochastic temperature pulsations caused by mixing of coolant flows.To solve the problems posed, aY-junction with «counter injection» was built, which was included in the thermal-hydraulic research facility. The design of theY-junction allows study of the thermal-hydraulic characteristics and durability of tube samples made of austenitic steel of 60 × 5 мм. Some tube samples had developed for measuring the temperature, stress-strain state of tube material and temperature field of coolant flow in mixing zone of single-phase coolants with different temperatures. Measuring tube samples were equipped with micro thermocouples and strain gauges.The experimental data of temperature pulsations, time-averaged temperature field in the coolant flow and on the outer surface of the sample were obtained, and statistical and spectral correlation characteristics of temperature pulsations were analyzed. According to results of measuring the relative strain, values of stresses were calculated.Devices and research techniques are developed. The combination of coolant flows parameters that provide thermal load of the metal surface at the highest level of stress intensity amplitude was obtained. The study results are used to verify the method for evaluating fatigue of reactor installations materials under stochastic temperature pulsations.

scholarly journals Dynamic inverse piezo-effect problem for a long piezoceramic thermoelastic cylinder

2021 ◽  
Vol 47 (4) ◽  
pp. 57-68
Author(s):  
M. A. Kalmova
Keyword(s):  
Temperature Field ◽  
Strain State ◽  
Piezoelectric Effect ◽  
Potential Difference ◽  
Electric Load ◽  
Piezoceramic Cylinder ◽  
Stress Strain ◽  
Inverse Piezoelectric Effect ◽  
Stress Strain State ◽  
Dynamic Inverse

Objective. The objective of this work is to solve an unrelated dynamic problem of thermoelectroelasticity for a long hollow piezoceramic cylinder under the action of an electric load on its surfaces in the form of a potential difference.Methods. The mathematical formulation of the considered problem of thermoelectroelasticity includes a system of non-selfadjoint differential equations. At the first stage, the authors consider the associated inverse piezoelectric effect problem without taking into account the influence of the temperature field, and at the next stage, study the hyperbolic heat conduction problem (Lord–Shulman theory) for a given (defined) electroelastic field.Result. A new closed solution to the dynamic inverse piezoelectric effect problem for a long piezoceramic thermoelastic cylinder is constructed. The case of the action of a dynamic electric load in the form of a potential difference on its front surfaces is considered. The ambient temperature and the law of convection heat transfer (3-kind boundary condition) are set. The calculated relations obtained using the generalized method of finite integral transformations allow determining the stress-strain state and thermoelectric fields induced in a piezoceramic element under an arbitrary electrical external influence.Conclusion. The constructed solution allows determining the stress-strain state and electric field in a piezoceramic cylinder, as well as analyzing the effect of the induced temperature field on the electroelastic state of the system under consideration using the hyperbolic Lord–Shulman theory of thermal conductivity. Analysis of the numerical results allows concluding that there are insignificant energy losses associated with heating the electroelastic system. The developed calculation algorithm is used in the design of non-resonant and resonant piezoelectric measuring devices.

Deteriorated Heat Transfer Influence On the Stress-Strain State of SMR SCWR Fuel Bundles

2021 ◽  
Author(s):  
Yaroslav Dubyk ◽  
Vladislav Filonov ◽  
Yuliia Filonova ◽  
Olexander Kovalenko
Keyword(s):  
Heat Transfer ◽  
Temperature Field ◽  
Strain State ◽  
Numerical Data ◽  
Maximum Temperature ◽  
Strength Analysis ◽  
Stress Strain ◽  
Stress Strain State ◽  
Experimental Profile ◽  
Axial Profile

Abstract The analysis of deteriorated heat transfer (DHT) influence on the stress-strain state of a perspective core of Small Modular Reactors with Supercritical Water (SMR SCWR) fuel assemblies is carried out, based on experimental and numerical data. Experimental data for 3- and 7-rod assemblies of 600 mm height with twisting spacer screws, on which deterioration heat transfer regimes were observed. The analysis of the stress-strain state was performed for two cases of temperature field. In the first variant, the temperature field is estimated using Computational Fluid Dynamics (CFD) with low-Re effects accounting, which allows obtaining the maximum temperature, but incorrectly estimates the axial profile. In the second case, an experimental profile with an averaged tangential temperature value is considered. Strength analysis is performed using the developed numerical-analytical mechanical model of the rod assembly. Obtained results make it possible to establish what is more important for assessing the safety of perspective reactors: a conservative estimate of the maximum wall temperature or its local distribution.

Sign in / Sign up

Export Citation Format

Share Document