scholarly journals Assessment of the Demand of Critical Materials for Fuel Cell Micro CHP for Households in Germany

2018 ◽  
Vol 20 (4) ◽  
pp. 758-766
Keyword(s):  
Fuel Cells ◽  
Energy Supply ◽  
Raw Materials ◽  
Quality Of Data ◽  
Household Energy ◽  
Potential Market ◽  
Potential Applicability ◽  
Technological Developments ◽  
Alternative Sources ◽  
Decentralized Energy

<p>Due to the pressing necessity of switching to alternative sources of energy, fuel cells (FC) for household applications have emerged as an alternative for decentralized energy supply. Despite the advancement on technological developments, concerns on the availability of critical raw materials required for the fabrication of these technologies may limit their implementation. This document analyses the demand of platinum for mass implementation of stationary fuel cells for household energy supply in Germany, through an analysis of the potential market, lifecycle of the product, material demands, and material flows. Different scenarios show that improving recycling rates and extending operation lifetime can help to mitigate the material needs even in the most demanding scenarios and reach material reuse targets. Methods and results can also be applied for other regions where FC have this potential applicability. Quality of data and its effects on the results need also to be further analyzed.</p>

PERSPECTIVE DEVELOPMENT OF WORLD PRODUCTION OF FEEDS FOR AQUACULTURE: ALTERNATIVE SOURCES OF RAW MATERIALS

2017 ◽  
pp. 67-78
Author(s):  
Lina Yurievna Lagutkina
Keyword(s):  
Raw Materials ◽  
Limiting Factors ◽  
Current Status ◽  
Feed Production ◽  
The World ◽  
Market Trends ◽  
Alternative Sources ◽  
World Industry ◽  
First Time ◽  
A Current

The author of the article discloses the prospects of development of the world feed production for aquaculture based on the analysis of key innovative technological and market trends. The author specifies that shortage, high cost, low ecological compatibility of traditional raw materials - fish flour - are among major limiting factors in the development of production of feeds for aquaculture. This fact, in turn, limits sustainable development of aquaculture both in Russia, and in the world in general. The article presents the overview of a current status of the world industry of feed production in aquaculture, where the regional situation is studied, as well. For the first time, there is given the outlook of innovative technologies in feed production based on the alternative sources of protein (on the example of projects of leading aquabiotechnological companies) which will determine industry’s objectives for the mid-term perspective.

On the diagnostics of Adonis L. species (Ranunculaceae) of the Russian flora

2020 ◽  
pp. 3-14
Author(s):  
Aleksandr Luferov
Keyword(s):  
Raw Materials ◽  
Natural Populations ◽  
Structural Features ◽  
Biologically Active ◽  
Scientific Medicine ◽  
Diagnostic Features ◽  
Plant Raw Materials ◽  
Similar Chemical ◽  
Chemical Studies ◽  
Alternative Sources

The article provides brief information about cardiotonic, sedative, cytostatic, diuretic, and antibacterial effects of biologically active compounds of Adonis L. (Ranunculaceae) species. Chemical studies allowed to identify the cardiac glycosides, or cardenolides: or cardenolides: adontoxin, adonitol, adonitoxigenin, acetyldigitoxin and others. In scientific medicine, it is currently allowed to use Adonis vernalis L. Other types of Adonis have a similar chemical composition and are offered as substitutes for this official species, for example, Adonis apennina L. Many Adonis species have limited natural resources, and in some regions are rare, requiring conservation of their natural populations. The search for alternative sources of medicinal plant raw materials, based on this, is relevant. The experimental part of our research was carried out using the morphological and geographical method with the involvement of information on ecology and phenology. For the first time summarizes the diagnostic features of Adonis flora of Russian flora. Previously unknown structural features (shape and size of anthers) were identified that characterize the subgenera Adonanthe and Adonis. Taxonomic study of the genus Adonis of the Russian flora allowed us to determine its species composition, clarify its systematic affiliation, and nomenclature synonyms. 9 species were identified. Of these, 6 are perennials belonging to the subgenus Adonanthe, section Consiligo, which includes 2 subsections: Amurenses (2 species) and Vernales, which is differentiated into 2 rows: Apenninae (2 species) and Vernales (2 species). Subgenus Adonis is represented by 2 sections: Adonis (1 species) and Lophocarpa with sections Aestivales (1 species) and Dentatae (1 species). For all the considered species and varieties, the main distribution areas are given. A key has been compiled to determine the wild Adonis species distributed in Russia.

STUDY OF EXTERNAL MASS TRANSFER DURING DRYING OF BERRY RAW MATERIALS TAKING INTO THE SHRINKAGE PHENOMENON

2019 ◽  
Author(s):  
А.В. АКУЛИЧ ◽  
Л.А. ГОСТИНЩИКОВА
Keyword(s):  
Mass Transfer ◽  
Energy Supply ◽  
Raw Materials ◽  
Mass Transfer Rate ◽  
Experimental Studies ◽  
Volume Shrinkage ◽  
External Mass Transfer ◽  
Transfer Coefficients ◽  
Ir Radiation ◽  
Criterial Equations

Исследованы закономерности внешнего массообмена при сушке ягодного сырья для различных способов энергоподвода. Установлено, что ягоды при сушке подвержены значительной объемной (72–81%) и линейной (35–43%) усадке, которую необходимо учитывать при расчете коэффициентов массоотдачи. Объекты исследования – ягоды черники, красной и черной смородины. Проведены экспериментальные исследования по сушке ягодного сырья при конвективном и конвективном с ИК-излучением способах энергоподвода. Исследования проведены при скорости сушильного агента хса1,2 м/с и температуре tса 70°С. Получены критериальные уравнения внешнего массоообмена при сушке ягод для периода постоянной скорости, учитывающие объемную усадку. Определено, что при сушке с конвективным энергоподводом объемная усадка при одном и том же значении критерия Рейнольдса оказывает на 12–20% большее влияние на интенсивность массоообмена для красной смородины по сравнению с черникой и черной смородиной. При сушке с конвективным энергоподводом, ИК-излучением и предварительным прокалыванием объемная усадка наиболее существенно влияет на массообмен для черной смородины, протекающий в 1,5–1,8 раза интенсивнее по сравнению с черникой и красной смородиной. Полученные критериальные уравнения могут быть использованы при расчете и проектировании установок для сушки ягодного сырья. The laws of external mass transfer during drying of berry raw materials for various methods of energy supply are investigated. It is established that the berries during drying are subject to significant volumetric (72–81%) and surface (35–43%) shrinkage, which must be taken into account when calculating the mass transfer coefficients. The objects of the study were various berries: blueberries, red and black currants. Experimental studies have been carried out on the drying of selected berries both in the case of convective and convective methods with IR radiation. Investigations were carried out at a drying agent velocity хса1,2 m/s and its temperature tca70°С. The criterion equations of external mass transfer during drying of berries for a period of constant speed, taking into account the volume shrinkage, are obtained. It was determined that during drying with convective energy supply, volume shrinkage with the same value of the Reynolds criterion on 12–20% has a greater effect on the mass transfer rate for red currants. When drying with convective energy supply, IR radiation and preliminary piercing, the volume shrinkage most significantly affects the mass transfer for black currants, which is 1,5–1,8 times more intense than blueberries and red currants. The obtained criterial equations can be used in the calculation and design of berries dryers.

Synthesis of Eco-friendly Nano-Structured Biosurfactants from Vegetable Oil Sources and Characterization of Their Interfacial Properties for Cosmetic Applications

MRS Advances ◽  
2018 ◽  
Vol 4 (07) ◽  
pp. 377-384 ◽  
Author(s):  
DaNan Yea ◽  
SeonHui Jo ◽  
JongChoo Lim
Keyword(s):  
Raw Materials ◽  
Coconut Oil ◽  
Interfacial Properties ◽  
Interfacial Property ◽  
Solution Stability ◽  
H Nmr ◽  
Wetting Property ◽  
Potential Applicability ◽  
Ft Ir

ABSTRACTIn this study, 3 types of zwitterionic phospholipid biosurfactants LDP(S), CDP(S) and CTDP(S) were prepared from 3 different raw materials such as rapeseed oil, coconut oil and cottonseed oil respectively. The structure of the resulting phospholipid biosurfactants was elucidated by FT-IR, 1H NMR and 13C NMR spectroscopies and their interfacial properties have been examined such as CMC, static surface tension, wetting property, solution stability, and foam property. Interfacial property measurement and prescription test in cosmetic formulation prepared with the newly synthesized biosurfactants revealed that CDP(S) biosurfactant possesses excellent mildness and superior interfacial properties, indicating the potential applicability in cosmetic product formulations.

scholarly journals A market-oriented database design for critical material research

2021 ◽  
Vol 1 (1) ◽  
pp. 34-49
Author(s):  
Ruby T. Nguyen ◽  
◽  
Ange-Lionel Toba ◽  
Michael H. Severson ◽  
Ethan M. Woodbury ◽  
...  
Keyword(s):  
Supply Chain ◽  
Raw Materials ◽  
Raw Material ◽  
Easy Access ◽  
Material Research ◽  
Supply Chain Risk ◽  
Quality Of Data ◽  
Critical Material ◽  
Market Focus ◽  
End Use

<abstract> <p>Material databases are important tools to provide and store information from material research. Rising concerns about supply-chain risks to raw materials presents a need to incorporate raw-material market and end-use application data, beyond basic chemical and physical properties, into a material database. One key challenge for researchers working on critical materials is information scarcity and inconsistency. This paper introduces, as a result of a two-year project, a critical-material commodity database (CMCD) incorporated with a low-code web-based platform that allows easy access for users and simple updates for the authors. The main goal of this project was to educate material scientists on the applications having the most impact on the supply chain and current industrial specifications/markets for each application. The objective was to provide material researchers with harmonized information so that they could gain a better understanding of the market, focus their technologies on an application with a high potential for commercialization, and better contribute to supply-chain risk reduction. While the goal was met with high receptivity, several limitations stemmed from query design, distribution platform, and quality of data source. To overcome some of these limitations and expand on CMCD's potential, we are building a public webpage with an improved interface, better data organization, and higher extensibility.</p> </abstract>

scholarly journals SPECIFIC FEATURES OF DECENTRALIZED ENERGY-SUPPLY SYSTEMS BASED ON TRANSFORMER-TYPE HEATER ELEMENTS

2012 ◽  
Vol 1 (10) ◽  
pp. 18-22 ◽  
Author(s):  
Vyacheslav M. Kuzmin ◽  
◽  
Alexander V. Serikov ◽  
Irina P. Stepanova ◽  
◽  
...  
Keyword(s):  
Energy Supply ◽  
Transformer Type ◽  
Decentralized Energy ◽  
Supply Systems ◽  
Energy Supply Systems

scholarly journals UTILIZATION OF WATER YAM (Dioscorea alata) AS A SOURCE OF ETHANOL

2021 ◽  
Vol 46 (1) ◽  
Author(s):  
A.M. Hashimi
Keyword(s):  
Raw Materials ◽  
Primary Alcohol ◽  
Raw Material ◽  
Dioscorea Alata ◽  
Fermentable Sugar ◽  
Iodine Solution ◽  
Indigenous Production ◽  
Job Opportunity ◽  
Alternative Sources ◽  
Water Yam

Ethanol (C2H5OH) is a primary alcohol which can be produced by fermentation, using any of the sources of carbohydrates such as sugarcane, cassava, grains and yam tubers among others. Production of ethanol fermented from renewable sources for fuel and fuel additives are known as bioethanol. Since the need of bioethanol is increasing, the production of bioethanol must be increased using cheaper and eco friendly raw materials. This study was conducted, using cheaper and eco friendly raw materials; water yam (Dioscorea alata) as alternative sources for ethanol production. The starch that was produced from water yam was hydrolysed into fermentable sugar, using acid hydrolysis. The fermentable sugar was converted into ethanol by fermentation process at pH 4.5 using fermenting brewer's yeast (Saccharomyces calsbergensis). Starch, glucose and ethanol which were obtained were analysed for physicochemical properties. Findings revealed that the starch sample obtained gave a blue-black colouration on addition of few drops of iodine solution. This confirmed that the carbohydrate content was mainly starch. On calculation of viability, findings further showed that water yam is a good raw material for production of ethanol, therefore indigenous production of ethanol obtained from water yam is economically viable and recommended. This will save the country from lot of money spends annually on the importation of ethanol and it can also provide job opportunity for many wandering and unemployed Nigerians.

Sign in / Sign up

Export Citation Format

Share Document