scholarly journals Influence of titanium and bio-fertilizers on some agronomic and physiological attributes of triticale exposed to cadmium stress

2017 ◽  
Vol 19 (3) ◽  
pp. 458-463 ◽  
Keyword(s):  
Superoxide Dismutase ◽  
Grain Yield ◽  
Cadmium Stress ◽  
Grain Weight ◽  
Nano Particles ◽  
Nano Particle ◽  
Sod Activity ◽  
Significant Difference ◽  
Four Levels ◽  
1000 Grain Weight

To evaluate the effects of titanium and bio-fertilizers on some agronomic and physiological properties of triticale grown in cadmium (Cd) contaminated soil, a glasshouse experiment was conducted based on a completely randomized design with three replications. The treatments were arranged in a 4×4 factorial experiment with four levels of titanium (control, bulk titanium, 0.01%, and 0.02% titanium nano-particles) and four levels of bio-fertilizers (no bio-fertilizer, Azotobacter chroococcum, Azospirillum brasilense and Azorhizobium caulinodans). The Cd contamination increased Cd accumulation in the leaves and seeds and also enhanced antioxidant enzymes activity. Cadmium stress decreased grain yield, 1000-grain weight and chlorophyll. Titanium nano-particle (0.02%) caused the maximum increase in grain yield, 1000-grain weight, leaf Cd, seed Cd, chlorophyll content. Superoxide dismutase (SOD) and catalase (CAT) activity increased due to titanium application but malondialdehyde (MDA) contented decreased. Although, there was no significant difference between control and bulk titanium treatments in terms of SOD activity. The effect of 0.02% nano-particle in increasing SOD activity was more pronounced than 0.01% treatment. In addition, CAT activity was more affected by titanium nano-particles than bulk titanium. Furthermore, Azorhizobium increased grain yield, 1000-grain weight, leaf Cd, seed Cd and chlorophyll while decreased superoxide dismutase and catalase enzyme activity.

scholarly journals Zinc, a micronutrient and its effect to performance of BARI gom30

2020 ◽  
Vol 8 (2) ◽  
pp. 137
Author(s):  
Salamun Gismy ◽  
Md. Romij Uddin ◽  
Md. Sohanur Rahman ◽  
Fakhar Uddin Talukder ◽  
Md. Shafiul Islam Rion
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Block Design ◽  
Maximum Yield ◽  
Grain Weight ◽  
Spike Length ◽  
Control Treatment ◽  
Straw Yield ◽  
Four Levels ◽  
1000 Grain Weight

To evaluate the effect of Zinc fertilizer on performance of wheat cv. BARI gom30, an experiment was carried out at Agronomy Field Laboratory, Bangladesh Agricultural University, Mymensingh, from November 2015 to March 2016. The experiment comprised four levels of Zinc (Zn) viz., 0, 1.5, 2 and 2.5 kg/ha. The experiment was laid out in a randomized complete block design with three replications. Application of Zinc (Zn) plant height, number of total tillers/plant, number of effective tillers/plant, spike length, number of fertile spikelets/spike numbers of sterile spikelets/spike number of grains/ spike, grain yield and straw yield were found significant. But there was no significant effect of the treatment on 1000-grain weight. The highest number of total tiller/plant (4.42), number of effective tillers/plant (3.92), number of grains/spike (47.70), 1000-grain weight (47.73 g), grain yield (5.06 t/ha), straw yield (6.21 t/ha) was obtained from 2 kg Zn/ha. The highest plant height (94.08 cm), spike length (9.92 cm), number of fertile spikelets/spike (19.59) and sterile spikelets/spike (3.22) and harvest index (46.16%) were recorded at 0 kg Zn/ha respectively. The control treatment indicated the lowest value for the yield attributing characters except the number of sterile spikelets/spike. Grain yield was found to be significantly and positively correlated with number of grains/spike and straw yield. It is recommended that application of 2 kg Zn/ha is the best for maximum yield of BARI gom30.   

scholarly journals Nitrogen sources affected the biosynthesis of 2-acetyl-1-pyrroline, cooked rice elongation and amylose content in rice

PLoS ONE ◽  
2021 ◽  
Vol 16 (7) ◽  
pp. e0254182
Author(s):  
Pouwedeou Mouloumdema Potcho ◽  
Nnaemeka Emmanuel Okpala ◽  
Tchalla Korohou ◽  
Muhammad Imran ◽  
Nabieu Kamara ◽  
...  
Keyword(s):  
Grain Yield ◽  
Amylose Content ◽  
Indica Rice ◽  
Grain Weight ◽  
Rice Grain ◽  
Rice Varieties ◽  
Cooked Rice ◽  
N Sources ◽  
Significant Difference ◽  
1000 Grain Weight

Many studies have been carried out on N sources effect on fragrant rice; however, their impact on rice grain quality is largely unclear. In this study, we evaluated the effects of different types of N sources on rice growth, yield, 2-acetyl-1-pyrroline (2AP), amylose and cooked rice elongation. Two indica rice cultivars, Basmati 385 (B385), Xiangyaxiangzhan (XYXZ) and two japonica cultivars, Yunjingyou (YJY), Daohuaxiang (DHX) were grown in experimental pots with six replications under four N sources: Potassium nitrate (KNO3), ammonium bicarbonate (NH4HCO3), urea (H2NCONH2) and sodium nitrate (NaNO3) in 2019 and 2020 early seasons. Our results showed that N dynamics regulated the number of panicles, 1000-grain weight, grain yield, 2-acetyl-1-pyrroline, amylose and cooked rice elongation across all the four treatments. The NH4HCO3 treatment significantly increased the number of panicles and grain yield across the four rice varieties compared with KNO3, H2NCONH2 and NaNO3 N sources in both 2019 and 2020 early season, The KNO3 treatment significantly showed higher 1000-grain weight in B-385, YJY, XYXZ and DHX compared to other N sources. Compared with other N sources treatment, the NH4HCO3 treatments significantly increased the 2AP contents in heading stage leaves, matured leaves and grains of B-385, YJY, XYXZ and DHX respectively. Cooked rice elongation percentage also showed significant difference in all treatments studied with KNO3 recorded the highest across the four varieties. Analysis of major enzymes and compounds such as P5C, P5CS, PDH, Pyrroline, proline and Methylglyoxal showed remarkable differences in each cultivar at heading and maturity stages with higher activity in NH4HCO3 and H2NCONH2 treatments. Similarly, in all treatments, we also observed significant increase in amylose content percentage, with NH4HCO3 having greater percentage of amylose.

scholarly journals Yield performance of some transplant aman rice varieties as influenced by different levels of nitrogen

2016 ◽  
Vol 12 (2) ◽  
pp. 321-324 ◽  
Author(s):  
MT Jisan ◽  
SK Paul ◽  
M Salim
Keyword(s):  
Grain Yield ◽  
Climatic Condition ◽  
Block Design ◽  
Grain Weight ◽  
Rice Varieties ◽  
Yield Performance ◽  
Randomized Complete Block Design ◽  
Four Levels ◽  
Different Levels ◽  
1000 Grain Weight

The experiment was carried out during the period of June to November 2013 at the Agronomy Field Laboratory, Bangladesh Agricultural University, Mymensingh with a view to examine the yield performance of some transplant aman rice varieties as influenced by different levels of nitrogen. The experiment consisted of four varieties viz. BRRI dhan49, BRRI dhan52, BRRI dhan56, BRRI dhan57 and four levels of N viz. 0, 46, 60 and 75 kg ha-1. The experiment was laid out in a randomized complete block design with three replications. Variety, levels of N and their interactions exerted significant influence on yield contributing characters and yield of transplant aman rice. Among the varieties, BRRI dhan52 produced the tallest plant (117.20 cm), highest number of effective tillers hill-1 (11.28), grains panicle-1 (121.5) and 1000-grain weight (23.65 g) whereas the lowest values of these parameters were produced by BRRI dhan57. Highest grain yield (5.69 t ha-1) was obtained from BRRI dhan52 followed by BRRI dhan49 (5.15 t ha-1) and the lowest one (4.25 t ha-1) was obtained from BRRI dhan57. In case of N, the tallest plant (111.70 cm), highest number of total tillers hill-1 (12.34), grains panicle-1 (133.6), 1000-grain weight (24.55 g) and grain yield (5.64 t ha-1) were obtained from 75 kg N ha-1 and the lowest values were obtained from control. BRRI dhan52 fertilized with 75 kg N ha-1 showed best performance with respect to all the parameters studied. The overall results suggest that BRRI dhan52 should be fertilized with 75 kg N ha-1 for getting higher yield under the agro-climatic condition of BAU.J. Bangladesh Agril. Univ. 12(2): 321-324, December 2014

scholarly journals Genetic Variability and Inter-relationship between Yield and Yield Components in Jhum Rice (Oryza sativa L.) Genotypes of Khagrachhari District in Bangladesh

2020 ◽  
Vol 18 (1) ◽  
pp. 1-9
Author(s):  
Mohammad Zahidul Islam ◽  
Nadia Akter ◽  
Md Ferdous Rezwan Khan Prince ◽  
Nashirum Monir ◽  
Mohammad Khalequzzaman
Keyword(s):  
Genetic Variability ◽  
Grain Yield ◽  
Plant Height ◽  
Coefficient Of Variation ◽  
Grain Weight ◽  
Genetic Advance ◽  
Significant Difference ◽  
Selection For ◽  
Positive Direct ◽  
1000 Grain Weight

The present investigation consists of 47 rice genotypes and the experiment was conducted during Aus season, 2016 in Randomized Block Design with three replications. The data were recorded for 13 quantitative characters to study genetic variability, heritability, genetic advance, correlation coefficient analysis and path analysis. Analysis of variance among 47 genotypes showed a significant difference for all characters studied. The highest genotypic coefficient of variation (GCV) and phenotypic coefficient of variation (PCV) were observed for grain yield followed by the number of effective tillers, the number of filled grains per panicle and 1000 grain weight indicating that these characters could be used in selection for the crop improvement program. High estimates of heritability was observed for grain yield, grain length, plant height, number of filled grain per panicle, 1000 grain weight and days to 50% flowering. High genetic advance was observed for the number of filled grains per panicle and plant height, indicating predominance of additive gene effects and possibilities of effective selection for the improvement of these traits. Grain yield showed positive association with number of effective tiller and number of filled grain per panicle at genotypic in conjunction with phenotypic level. Days to maturity possessed the highest positive direct effect and significant indirect correlation with yield. The Agriculturists 2020; 18(1) 01-09

Study onGenetic Variability, Heritability and Genetic Advance for Seed Yield and Component Traits in Rice

2017 ◽  
Vol 4 (03) ◽  
Author(s):  
PUNIT KUMAR ◽  
VICHITRA KUMAR ARYA ◽  
PRADEEP KUMAR ◽  
LOKENDRA KUMAR ◽  
JOGENDRA SINGH
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Seed Yield ◽  
Flag Leaf ◽  
Grain Weight ◽  
Major Influence ◽  
Genetic Advance ◽  
Component Traits ◽  
Biological Yield ◽  
1000 Grain Weight

A study on genetic variability, heritability and genetic advance for seed yield and component traits was made in 40 genotypes of riceduring kharif 2011-2012 at SHIATS, Allahabad. The analysis of variance showed highly significant differences among the treatments for all the 13 traits under study.The genotypes namely CN 1446-5-8-17-1-MLD4 and CR 2706 recorded highest mean performance for panicles per hill and grain yield. The highest genotypic and phenotypic variances (VG and VP) were recorded for spikelets per panicle (3595.78 and 3642.41) followed by biological yield (355.72 and 360.62) and plant height (231.48 and 234.35).High heritability (broad sense) coupled with high genetic advance was observed for plant height, flag leaf length, panicles per hill, tillers per hill, days to maturity, spikelet’s per panicle, biological yield, harvest index, 1000 grain weight and grain yield, indicating that selection will be effective based on these traits because they were under the influence of additive and additive x additive type of gene action. Highest coefficient of variation (PCV and GCV) was recorded for tillers per hill (18.42% and 17.23%), panicle per hill (19.76 % and 18.68%), spikelet’s per panicle (34.30 and34.07 %), biological yield (28.31 % and 28.12 %), 1000 grain weight (15.57 % and 15 31 %) and grain yield (46.66% and 23.54 %), indicating that these traits are under the major influence of genetic control, therefore the above mentioned traits contributed maximum to higher grain yield compared to other traits, indicating grain yield improvement through the associated traits.

scholarly journals Residual Effect of Poultry Manure and Mineral N Application on Maize Production under Wheat-Maize Cropping System

2017 ◽  
Vol 5 (9) ◽  
pp. 1061
Author(s):  
Syed Azam Shah ◽  
Wisal Mohammad ◽  
Haroon Haroon ◽  
Adnan Anwar Khan
Keyword(s):  
Grain Yield ◽  
Field Experiments ◽  
Poultry Manure ◽  
Residual Effect ◽  
Grain Weight ◽  
Organic N ◽  
Wheat Crop ◽  
Silty Clay ◽  
Mineral N ◽  
1000 Grain Weight

The study was designed to asses the residual effect of organic N (Poultry Manure) and mineral N on maize crop in field experiments carried out on silty clay loam soil at NIFA, Tarnab, Peshawar, Khyber Pakhtunkhwa (KP) Pakistan during 2014-15. Combined dose of N from both sources were 120 kg ha-1 applied to wheat crop alone and in different combination making six treatments. Maize variety (Azam) was sown in Randomized complete block (RCB) design with four replications. Agronomic data, grains ear-1, 1000 grain weight, biomass grain yield data, N-uptake in maize grain and straw were recorded. Results showed that maximum grain ear−1, 1000 grain weight, biomass and grain yield was obtained from treatment where 25% N applied from poultry manure + 75% from mineral N source applied to previous wheat crop. Agronomic efficiency and nitrogen use efficiency were also found maximum in treatment where 75% poultry manure + 25% mineral N was applied. It was concluded from the study that residual effect of organic manure with mineral N in different ratios enhances crop productivity and soil fertility.

scholarly journals Comparative study of different organic mulches for increased wheat productivity district Faisalabad, Punjab, Pakistan

2021 ◽  
Vol 9 (3) ◽  
Author(s):  
Ahmad Raza ◽  
Muhammad Nawaz ◽  
Muhammad U. Chattha ◽  
Imran Khan ◽  
Muhammad B. Chattha ◽  
...  
Keyword(s):  
Grain Yield ◽  
Crop Growth ◽  
Grain Weight ◽  
Growth And Yield ◽  
Straw Mulch ◽  
Nitrogen Levels ◽  
Major Threat ◽  
Biological Yield ◽  
1000 Grain Weight ◽  
Sorghum Straw

Weeds are major threat to global wheat production and cause serious threat to food security. Likewise, water scarcity is also a major threat to food production and its intensity is continuously soaring up across the globe. Organic mulches have potential to reduce weeds growth and conserve the soil moisture thus ensures the better crop growth and yield. Therefore, present study was conducted to compare the performance of different organic mulches in improving wheat growth and productivity. The study was comprised of different organic mulches; M1= No mulch (control) M2= maize straw mulch, M3= wheat straw mulch, M4= sorghum straw mulch and M5= rice straw mulch and three nitrogen levels N1 = 90 kg, N2 = 120 kg and N3= 150 kg/ha. The results indicated that both organic mulches and N rates had significant impact on growth, and yield traits. The maximum leaf area index (LAI), crop growth rate (CGR), productive tillers (307 m-2), grains/spike (46.22), 1000 grain weight (42.33 g) biological yield (13.76 t/ha) and grain yield 4.75 t/ha was obtained with sorghum straw mulch and minimum productive tillers (255.33 m-2), grains/spike (36.22), biological yield (11.46 t/ha) and grain yield (3.59 t/ha) was recorded in no mulch (control). Among nitrogen levels maximum productive tillers (290.6 m-2), grains/spike (42.80), 1000 grain weight (40.65 g), biological yield (13.44 t/ha) and grain yield (4.32 t/ha) was obtained with 150 kg/ha N and minimum productive tillers (274 m-2), grains/spike (38.13), 1000 grain weight (36.94 g) biological yield (11.98 t/ha) and grain yield (3.90 t/ha) was obtained with 90 N kg/ha. Thus, farmers can use sorghum straw mulch and N (150 kg ha-1) to improve the wheat productivity. However, farmers must be educated by government institute and adoptive research farms in order to understand and adaption of this approach.

scholarly journals Host-pathogen interaction between spring wheat and Septoria nodorum with reference to resistance breeding

1985 ◽  
Vol 57 (1) ◽  
pp. 1-66
Author(s):  
Reijo Karjalainen
Keyword(s):  
Grain Yield ◽  
Spring Wheat ◽  
Wheat Breeding ◽  
Grain Weight ◽  
Septoria Nodorum ◽  
Spore Concentration ◽  
Screening Techniques ◽  
Host Pathogen Interaction ◽  
Host Pathogen ◽  
1000 Grain Weight

Host-pathogen interaction between spring wheat and Septoria nodorum Berk. with applications for wheat breeding were studied. Ultrastructure of interactions was studied using electron microscopic techniques. Following inoculation, conidia of S. nodorum germinate, form appressoria anda penetration peg which directly penetrates through the cell walls. It is suggested that most penetration attempts fail because of cellular defence reactions, formation of papillae and cell wall alterations. Inoculation with low spore concentration reduced grain yield of Hankkija’s Taava cultivar by 10 % and 1000-grain weight by 14 %. Inoculation with high spore concentration on large plots of Tähti cultivar reduced grain yield by 32 % and 1000-grain weight by 18 %. Inoculation with high spore concentration on normal breeding plots of Tähti cultivar reduced grain yield by 35 % and 1000-grain weight by 21 % and the grain yield of Kadett cultivar by 27 % and 1000-grain weight by 20 %. Inheritance studies on F2 progenies of spring wheat crosses involving susceptible and moderately or highly resistant parents suggest that heredity component of symptom expression is moderate level and breeding success depends mainly on efficient screening techniques. Resistance was associated with tallness in crosses, and cultivar trials suggest that resistance is positively associated with late maturation time. Field screening techniques based on small plots and artificial inoculation showed that the most resistant entries were wild Triticum species and late and tall cultivars. Seedling plant tests based on attached seedling leaves and detached leaves revealed easily the most resistant and most susceptible cultivars. The overall correlation between seedling tests and field tests was quite high. The results are discussed in relation to wheat breeding strategies for resistance to S. nodorum.

scholarly journals Effect of level of irrigation and nitrogen rate on yield performance of late sown wheat

2018 ◽  
Vol 29 (3) ◽  
pp. 213-220
Author(s):  
S Kazi ◽  
SU Bhuiya ◽  
AK Hasan ◽  
RR Rajib ◽  
ABMR Rahman ◽  
...  
Keyword(s):  
Grain Yield ◽  
Plant Height ◽  
Harvest Index ◽  
Grain Weight ◽  
Spike Length ◽  
High Dose ◽  
Nitrogen Rate ◽  
Irrigation Level ◽  
1000 Grain Weight ◽  
Late Sowing

The experiment was at the Agronomy Field Laboratory, Bangladesh Agricultural University, Mymensingh–2202 during late Rabi season (December-March) of 2015. It was two factorial experiment (1) irrigation level and (2) nitrogen rate. Irrigation significantly influenced on yield and yield contributing characters except harvest index. The highest plant height (79.69cm), maximum number of total tillers plant-1 (4.725), number of grains spike-1 (40.61), spike length (11.80cm), 1000 grain weight (28.67g), grain yield (3.227 t ha-1), harvest index (41.26%) were obtained by mulching treatment. Nitrogen rate significantly influenced the yield and yield contributing characters. The highest plant height (80.37cm), maximum number of total tillers plant-1 (5.124), number of grains spike-1 (40.85), spike length (10.37cm), 1000 grain weight (31.86g), grain yield (3.792 t ha-1), harvest index (41.69%) were obtained by the application of 180 kg N ha-1. The combined effect of Irrigation and nitrogen significantly interacted on yield and yield contributing characters. The highest plant height (83.44cm), number of total tillers plant-1 (5.66), number of grains spike-1 (41.60), 1000 grain weight (36.66g), grain yield (4.32 t ha-1) and harvest index (47.36%) were obtained by application of 180 kg N ha-1 with mulching. The present study revealed that high dose of nitrogen 180 kg ha-1 and mulching practice can compensate low production of wheat even at late sowing. Progressive Agriculture 29 (3): 213-220, 2018

Assessing barley (Hordeum vulgare) response to clipping in the semi-arid Mediterranean climate

2004 ◽  
Vol 44 (1) ◽  
pp. 37
Author(s):  
M. K. J. El-Shatnawi ◽  
N. I. Haddad
Keyword(s):  
Grain Yield ◽  
Yield Components ◽  
Field Experiments ◽  
Grain Weight ◽  
Growing Seasons ◽  
North Eastern ◽  
Pot Trials ◽  
Tiller Density ◽  
Induced Changes ◽  
1000 Grain Weight

Greenhouse pot trials and field experiments were carried out under rain-fed condition in north-eastern Jordan during 1997–98 and 1998–99 growing seasons, to test 3 barley genotypes for their suitability for both forage and grain production. The varieties Rehani and ACSAD176 produced higher forage yields than Rum. In the field, clipping reduced subsequent grain yield per plant by about 18%, lowering grain weight of the main spike from 2.3�g in the control to 1.8 g in the clipped plants. Clipping increased tiller density of barley plants in the field. Decreases in grain yield following clipping could also be attributed to reductions in the number of grains per spike. Clipping decreased the number of grains per spike by about 9% by reducing the number of spikelets per spike. Cutting reduced 1000-grain weight by about 9%. Clipping induced changes in the relative importance of yield components influencing subsequent grain yield. The yield components reduced by clipping were the most important contributors to loss of grain yield.

Sign in / Sign up

Export Citation Format

Share Document