scholarly journals Decolarization of methylene blue and methyl orange with Ag doped TiO2 under UV-A and UV-Visible conditions: process optimization by response surface method and toxicity evaluation

2016 ◽  
Vol 18 (2) ◽  
pp. 371-380 ◽  
Keyword(s):  
Methylene Blue ◽  
Degradation Pathways ◽  
Composite Analysis ◽  
Photocatalytic Process ◽  
Wastewater Discharge ◽  
Toxicity Evaluation ◽  
Surface Method ◽  
Photocatalytic System ◽  
Uv Visible ◽  
Central Composite

<div> <p>MB decolarization with pure TiO<sub>2</sub> and Ag doped TiO<sub>2</sub> based photocatalytic system were investigated under UV-A and UV-Visible conditions. Different ratios of Ag were used as metal dopant. 1% Ag-TiO<sub>2</sub> increased the decolorization efficiencies of MB and MO dyes, also the k<sub>app</sub> constant enhanced under UV-A and UV-Visible conditions. A central composite analysis showed the effect of initial dye concentration, pH, Ag-TiO<sub>2</sub> concentration and the reaction time of photocatalytic process under UV-A irridation in both dyes. The photocatalytic degradation pathways of both dyes by Ag doped TiO<sub>2</sub> catalyst were obtained in this study. According to these results, the application of Ag-TiO<sub>2</sub> catalyst are proved to be more effective than pure TiO<sub>2</sub> catalyst for both MB and MO removal. The toxicity test of Daphnia Magna shows that non toxic wastewater discharge to the receiving environment could be possible with photocatalytic degration by Ag-TiO<sub>2</sub> catalyst.</p> </div> <p>&nbsp;</p>

scholarly journals Decolorization of Methylene Blue by Ag/SrSnO3 Composites under Ultraviolet Radiation

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Patcharanan Junploy ◽  
Titipun Thongtem ◽  
Somchai Thongtem ◽  
Anukorn Phuruangrat
Keyword(s):  
Electron Microscopy ◽  
Methylene Blue ◽  
Uv Radiation ◽  
Photoelectron Spectroscopy ◽  
Separation Process ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
X Ray ◽  
Negative Effect ◽  
Uv Visible

SrSn(OH)6 precursors synthesized by a cyclic microwave radiation (CMR) process were calcined at 900°C for 3 h to form rod-like SrSnO3. Further, the rod-like SrSnO3 and AgNO3 in ethylene glycol (EG) were ultrasonically vibrated to form rod-like Ag/SrSnO3 composites, characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), electron microscopy (EM), Fourier transform infrared (FTIR) spectroscopy, and UV-visible analysis. The photocatalyses of rod-like SrSnO3, 1 wt%, 5 wt%, and 10 wt% Ag/SrSnO3 composites were studied for degradation of methylene blue (MB, C16H18N3SCl) dye under ultraviolet (UV) radiation. In this research, the 5 wt% Ag/SrSnO3 composites showed the highest activity, enhanced by the electron-hole separation process. The photoactivity became lower by the excessive Ag nanoparticles due to the negative effect caused by reduction in the absorption of UV radiation.

Synthesis and Characterization of Poly(azomethine)/ZnO Nanocomposite Toward Photocatalytic Degradation of Methylene Blue, Malachite Green, and Bismarck Brown

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
S. J. Pradeeba ◽  
K. Sampath
Keyword(s):  
Methylene Blue ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Fourier Transform Infrared Spectroscopy ◽  
Malachite Green ◽  
Fourier Transform Infrared ◽  
Visible Spectroscopy ◽  
X Ray ◽  
Natural Sunlight ◽  
Uv Visible

This research was carried out based on the significance of protecting the environment by preventing the contamination of water caused from effluents discharge from dyeing industries, effective nanocomposite were prepared to solve this problem. The poly(azomethine), ZnO, and poly(azomethine)/ZnO nanocomposites were prepared and characterized by Fourier transform-infrared spectroscopy, ultraviolet (UV)–visible spectroscopy, powder X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDAX), scanning electron Microscope (SEM), and transmission electron microscopy (TEM) techniques. Methylene blue (MB), Malachite green (MG), and Bismarck brown (BB) were degraded from water using poly(azomethine) (PAZ), zinc oxide (ZnO), PAZ/ZnO (PNZ) nanocomposites as photocatalyst in the presence of natural sunlight. The degradation efficiency and reaction kinetics were calculated, and the outcome of the photocatalytic experiments proved that the PAZ/ZnO nanocomposites reveals excellent photocatalytic activity and effective for decolorization of dye containing waste water than PAZ and ZnO in the presence of natural sunlight. The maximum degradation efficiency 97%, 96%, and 95% was obtained for PNZ nanocomposites at optimum dosage of catalyst as 500 mg and 50 ppm of MB, MG, and BB dye concentration, respectively. The maximum degradation time was 5 h. After photocatalytic study, the samples were characterized by Fourier-transform infrared spectroscopy (FT-IR) and UV–visible spectroscopy.

Photodegradation of New Methylene Blue N in Aqueous Solution Using Zinc Oxide and Titanium Dioxide as Catalyst

2012 ◽  
Author(s):  
Rusmidah Ali ◽  
Boon Siew Ooi
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Zinc Oxide ◽  
Titanium Dioxide ◽  
Optimum Condition ◽  
Metal Ion ◽  
Optimum Ratio ◽  
Photodegradation Rate ◽  
Uv Visible ◽  
Uv Lamp

Dalam kajian ini, ZnO dan TiO2 digunakan sebagai fotomangkin dalam pendegradasian pewarna New Methylene Blue N (NMBN). Kadar fotodegradasi diukur menggunakan alat spektrofotometer UV-Vis. Dalam kajian ini, New Methylene Blue N menunjukkan nilai serapan pada λ = 590 nm dan λ = 286 nm. Lampu UV (λ = 354 nm) digunakan dalam proses fotodegradasi. Dalam proses degradasi menggunakan ZnO menunjukkan 81.42% NMBN terdegradasi pada λ = 590 nm dan 77.75% pada λ = 286 nm. Sebaliknya, degradasi menggunakan TiO2 adalah 25.68% pada λ = 590 nm dan 26.37% pada λ = 286 nm. Peratus degradasi New Methylene Blue N ialah 88.89% dan 68.94% pada masing-masing λ = 590 nm dan λ = 286 nm apabila ditambahkan dengan H2O2. Campuran ZnO dan TiO2 dalam nisbah 85: 15 (0.085 g; 0.015 g) merupakan campuran fotomangkin yang paling optimum iaitu dengan peratus degradasi NMBN sebanyak 96.97% dan 93.61% pada λ = 590 nm dan λ = 286 nm. Penambahan ion logam Cu2+ memberikan peratus degradasi tertinggi berbanding ion logam lain iaitu 83.83% pada λ = 590 nm. Penambahan ion logam Pb2+ memberikan peratus degradasi tertinggi pada λ = 286 nm iaitu 81.25% pewarna terdegradasi. Keadaan optimum dicapai pada pH 5.90, dengan peratus degradasi tertinggi iaitu 92.84% dan 89.30% pada masing-masing λ = 590 nm dan λ = 286 nm. Kata kunci: New Methylene Blue N; fotodegradasi; larutan; ZnO; TiO2 In this study, ZnO and TiO2 are used as photocatalyst to degrade the dye, New Methylene Blue N (NMBN). The photodegradation rate was measured using UV-Visible spectrophotometer. In this study, New Methylene Blue N showed absorption values at λ = 590 nm and λ = 286 nm. UV lamp (λ = 354 nm) is used in the photodegradation process. Results showed that ZnO is a better photocatalyst compared to TiO2. The degradation by ZnO showed that 81% of NMBN was degraded at λ = 590 nm and 77.75% at λ = 286 nm. In contratst, the degradation using TiO2 was 25.68% at λ = 590 nm and 26.37% at λ = 286 nm. The percent degradation of New Methylene Blue N is 88.89% and 68.94% at λ = 590 nm and λ = 286 nm respectively when H2O2 was added. A mixture of ZnO and TiO2 in the ratio of 85: 15 (0.085 g: 0.015 g) is the most optimum ratio for the mixed photocatalyst where the degradation percentage of NMBN are 96.97% and 93.61% at λ = 590 nm and λ = 286 nm. The addition of Cu2+ metal ion gave the highest percentage of degradation (83.83% at λ = 590 nm) compared to other metal ions. The addition of Pb2+ gave the highest percentage of degradation at λ = 286 nm with 81.25% degradation of the dye. The optimum condition was achieved at pH 5.90, which gave the highest percentage degradation, 92.84% and 89.30% at λ = 590 nm and λ = 286 nm respectively. Key words: New Methylene Blue N; photodegradation; aqueous; ZnO; TiO2

scholarly journals Synthesis and Photoactivity of Fe3O4/TiO2-Co as a Magnetically Separable Visible Light Responsive Photocatalyst

2018 ◽  
Vol 18 (3) ◽  
pp. 403 ◽  
Author(s):  
Eko Sri Kunarti ◽  
Indriana Kartini ◽  
Akhmad Syoufian ◽  
Karolina Martha Widyandari
Keyword(s):  
Methylene Blue ◽  
Visible Light ◽  
Dopant Concentration ◽  
Band Gap Energy ◽  
Methylene Blue Solution ◽  
Magnetic Photocatalyst ◽  
Blue Solution ◽  
Degradation Reaction ◽  
Visible Irradiation ◽  
Uv Visible

Synthesis of magnetic photocatalyst, Fe3O4/TiO2-Co, with characterization and photoactivity examination have been conducted. The synthesis was initiated by preparation of Fe3O4 particles using coprecipitation method. The Fe3O4 particles were then coated with TiO2-Co at a various ratio of Fe3O4:TiO2 and concentration of Co(II) dopant. The Fe3O4/TiO2-Co was characterized by FTIR, XRD, TEM, SEM-EDX, VSM, and SR UV-visible methods. Photoactivity of the Fe3O4/TiO2-Co was carried out using methylene blue as a target molecule in degradation reaction within a batch system. By using optimum conditions, the degradation of methylene blue solution was performed under exposure to UV, visible light and dark condition. Results showed that the Fe3O4/TiO2-Co formation was confirmed by the presence of Fe3O4 and anatase diffraction peaks in the X-ray diffractogram. SR UV-Vis spectra indicated that the Fe3O4/TiO2-Co was responsive to visible light. Band gap energy of the Fe3O4/TiO2-Co with dopant concentration of 1; 5; 10 and 15% were 3.22; 3.12; 3.09 and 2.81 eV, respectively. The methylene blue solution can be well photodegraded at a pH of 10 for 210 min. The Fe3O4/TiO2-Co has the highest ability to methylene blue photodegradation with dopant concentration of 10% gave degradation yield of 80.51 and 95.38% under UV and visible irradiation, respectively.

ZnO-SiO2/Laponite Photocatalyst: Kinetic Study on Photocatalytic Decolorization of Methylene Blue

2014 ◽  
Vol 896 ◽  
pp. 541-544
Author(s):  
Is Fatimah ◽  
N. Nunani Yuyun
Keyword(s):  
Methylene Blue ◽  
Energy Dispersive Spectrometry ◽  
Photocatalytic Performance ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Photocatalytic Decolorization ◽  
Uv Visible ◽  
Gel Preparation ◽  
Adsorption Desorption

ZnO-SiO2/Laponite was prepared by sol-gel preparation procedure consit of SiO2 pillarization to laponite followed by ZnO dispersion by using zinc acetate as precursor. The obtained material was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), diffuse reflectance UV-Visible (DRUV-Vis) and N2 adsorption-desorption analysis. The photocatalytic performance of the amterial in methylene blue decolorization was also investigated. Compared with ZnO-SiO2 nanoparticles, it is concluded that ZnO-SiO2/Laponite possess higher photocatalytic activity which obey Temkin isotherm model.

Visible Light Induced Photocatalytic Degradation of Rhodamine B in the Presence of Cr(VI)

2013 ◽  
Vol 295-298 ◽  
pp. 1434-1437
Author(s):  
Dong Dong Zhang ◽  
Rong Liang Qiu ◽  
Xiong Fei Huang
Keyword(s):  
Visible Light ◽  
Photocatalytic Degradation ◽  
Rhodamine B ◽  
Active Sites ◽  
Photocatalytic Process ◽  
Photocatalytic System

Here we report the photocatalytic degradation characteristics of Rhodamine B in the presence of Cr(VI). Some interesting results were observed during the photocatalytic process. Cr(VI) caused a deactivation effect on the catalyst due to the formation of Cr(OH)3precipitate blocking the active sites of catalyst. Moreover, a kind of red oligomer precipitate was found during the RhB degradation when Cr(VI) was presented. This precipitate was rarely reported in photocatalytic system.

Catalytic Ozonation of Sulfamethoxazole in the Presence of CuO/Al2O3-EPC: Optimization, Degradation Pathways, and Toxicity Evaluation

2019 ◽  
Vol 36 (8) ◽  
pp. 912-921 ◽  
Author(s):  
Jianfei Yan ◽  
Leiduo Lai ◽  
Fangzhou Ji ◽  
Yunhong Zhang ◽  
Yunzhen Li ◽  
...  
Keyword(s):  
Catalytic Ozonation ◽  
Degradation Pathways ◽  
Toxicity Evaluation
Sign in / Sign up

Export Citation Format

Share Document