scholarly journals Water Solution Polishing of Nitrate Using Potassium permanganate Modified Zeolite: Parametric experiments, kinetics and equilibrium analysis

2016 ◽  
Vol 18 (3) ◽  
pp. 546-558 ◽  
Keyword(s):  
Potassium Permanganate ◽  
Contact Time ◽  
Water Solution ◽  
Equilibrium Analysis ◽  
Synthetic Wastewater ◽  
Maximum Adsorption Capacity ◽  
Kinetic Evaluation ◽  
Modified Zeolite ◽  
X Ray ◽  
Adsorbent Dose

<div> <p>In the present study, adsorption potential of potassium permanganate (Hypermangan) modified zeolite was investigated for the removal of nitrate from synthetic wastewater. Effects of the most significant parameters (pH, adsorbent dose, nitrate concentration and contact time) were initially evaluated based on the percentage of nitrate removed from the water solutions. Over 90 % removal of 150 mg L<sup>-1</sup> nitrate was achieved at an optimum pH of 5, adsorbent dose of 2g L<sup>-1</sup> after a 60 min contact time. The chemical and morphological characterizations of Hypermangan modified zeolite (HMZ) were carried out by using scanning electron microscopy (SEM), fourier transform infrared (FT-IR), x-ray diffraction (XRD) and x-ray fluorescence (XRF) analysis methods. Kinetic evaluation indicated that the nitrate adsorption onto HMZ followed the pseudo-first-order model. The equilibrium data assessment illustrated the removal of nitrate by HMZ follows a Langmuir model which attains the maximum adsorption capacity 6.7 mg g<sup>-1</sup>.The mean free energy of adsorption was 0.15 kJ mol<sup>-1</sup>, which indicates the adsorption of nitrate onto HMZ, occurs through a physical mechanism.</p> </div> <p>&nbsp;</p>

scholarly journals Fly Ash Coated with Magnetic Materials: Improved Adsorbent for Cu (II) Removal from Wastewater

Materials ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 63
Author(s):  
Maria Harja ◽  
Gabriela Buema ◽  
Nicoleta Lupu ◽  
Horia Chiriac ◽  
Dumitru Daniel Herea ◽  
...  
Keyword(s):  
Fly Ash ◽  
Adsorption Capacity ◽  
Copper Ions ◽  
Synthetic Wastewater ◽  
Bet Surface Area ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Copper Adsorption ◽  
X Ray

Fly ash/magnetite material was used for the adsorption of copper ions from synthetic wastewater. The obtained material was characterized by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET) surface area, and vibrating sample magnetometer (VSM). Batch adsorption experiments were employed in order to investigate the effects of adsorbent dose, initial Cu (II) concentration and contact time over adsorption efficiency. The experimental isotherms were modeled using Langmuir (four types of its linearization), Freundlich, Temkin, and Harkins–Jura isotherm models. The fits of the results are estimated according to the Langmuir isotherm, with a maximum adsorption capacity of 17.39 mg/g. The pseudo-second-order model was able to describe kinetic results. The data obtained throughout the study prove that this novel material represents a potential low-cost adsorbent for copper adsorption with improved adsorption capacity and magnetic separation capability compared with raw fly ash.

scholarly journals Cadmium Removal by using Pumice Modified with Iron Nanoparticles from Aqueous Solutions

2016 ◽  
Vol 18 (2) ◽  
pp. 426-436 ◽  
Keyword(s):  
Contact Time ◽  
Iron Nanoparticles ◽  
Cadmium Concentration ◽  
Synthetic Wastewater ◽  
Isotherm Models ◽  
Cadmium Removal ◽  
Pumice Stone ◽  
Practical Applications ◽  
Equilibrium Data ◽  
Adsorbent Dose

<p>In this study, the removal of cadmium by using pumice coated with iron nanoparticles (INPs) from synthetic wastewater was investigated. The effects of parameters influencing adsorption: contact time (10-20 min), pH (3-9), initial cadmium concentration (25-125 mg l<sup>-1</sup>) and adsorbent dose (2-10 g l<sup>-1</sup>) were studied. The pumice stone used in this research was, first, crashed and then sieved with 20 mesh standard sieves (0.85 mm); finally, it was coated with INPs. An atomic absorption spectrophotometer was used to measure cadmium contents and isotherm models and adsorption kinetics were studied. The results showed the adsorption process of cadmium reached equilibrium at contact time of 80 min. With increasing pH solution, the efficiency enhanced which peaked at pH 7-8. Cadmium concentration increase resulted in a decrease in efficiency, whereas adsorbent dose increase improved it. Equilibrium data of adsorption followed isotherms models: Langmuir and Freundlich. The highest removal efficiency and adsorption capacity were, respectively, 83% and 17.27 mg g<sup>-1</sup>. Furthermore, absorption kinetics is better described by the pseudo second-order model. According to the results obtained, pumice coated with INPs is an effective adsorbent and can be introduced as a suitable option in practical applications</p>

scholarly journals Application of treated eggplant peel as a low-cost adsorbent for water treatment toward elimination of Pb2+: Kinetic modeling and isotherm study

2018 ◽  
Vol 36 (3-4) ◽  
pp. 1112-1143 ◽  
Author(s):  
Mohammad Hossein Karimi Darvanjooghi ◽  
Seyyed Mohammadreza Davoodi ◽  
Arzu Y Dursun ◽  
Mohammad Reza Ehsani ◽  
Iman Karimpour ◽  
...  
Keyword(s):  
Contact Time ◽  
Low Cost ◽  
Standard Free Energy ◽  
Chemical Properties ◽  
Entropy Change ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Standard Entropy ◽  
Adsorption Parameters ◽  
Adsorbent Dose

In this study, treated eggplant peel was used as an adsorbent to remove Pb2+ from aqueous solution. For this purpose batch adsorption experiments were performed for investigating the effect of contact time, pH, adsorbent dose, solute concentrations, and temperature. In order to assess adsorbent’s physical and chemical properties, Fourier transform infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy were used. The results showed that the adsorption parameters for reaching maximum removal were found to be contact time of 110 min, adsorbent dose of 0.01 g/ml, initial lead(II) concentration of 70 ppm, pH of 4, and temperature of 25°C. Moreover, for the experiments carried out at pH > 4 the removal occurred by means of significant precipitation as well as adsorption. Furthermore, these results indicated that the adsorption followed pseudo-second-order kinetics model implying that during the adsorption process strong bond between lead(II) and chemical functional groups of adsorbent surface took place. The process was described by Langmuir model (R2 = 0.99; maximum adsorption capacity 88.33 mg/g). Also thermodynamics of adsorption was studied at various temperatures and the thermodynamic parameters including equilibrium constant (K), standard enthalpy change, standard entropy change, and standard free energy changes were obtained from experimental data.

scholarly journals Adsorptive Behavior of an Activated Carbon for Bisphenol A Removal in Single and Binary (Bisphenol A—Heavy Metal) Solutions

Water ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 2150 ◽  
Author(s):  
M.A. Martín-Lara ◽  
M. Calero ◽  
A. Ronda ◽  
I. Iáñez-Rodríguez ◽  
C. Escudero
Keyword(s):  
Heavy Metal ◽  
Activated Carbon ◽  
Bisphenol A ◽  
Contact Time ◽  
Water Solution ◽  
Metal Cations ◽  
Maximum Adsorption Capacity ◽  
Batch Mode ◽  
Heavy Metal Cations ◽  
Adsorptive Behavior

Bisphenol A (BPA) is an extensively produced and consumed chemical in the world. Due to its widespread use, contamination by this pollutant has increased in recent years, reaching a critical environmental point. This work investigates the feasibility of bisphenol A adsorption from industrial wastewater solutions, testing the reduction of bisphenol A in synthetic solutions by a commercial activated carbon, AC-40, in batch mode. Besides, mixtures of bisphenol A and different heavy metal cations were also studied. So far, no works have reported a complete study about bisphenol A removal by this activated carbon including the use of this material to remove BPA in the presence of metal cations. First, adsorption experiments were performed in batch changing pH, dose of adsorbent, initial bisphenol A concentration and contact time. Results showed greater retention of bisphenol A by increasing the acidity of the medium. Further, the percentage of bisphenol A adsorbed increased with increasing contact time. The selected conditions for the rest of the experiments were pH 5 and a contact time of 48 h. In addition, an increase in retention of bisphenol A when the dose of adsorbent increased was observed. Then, specific experiments were carried out to define the kinetics and the adsorption isotherm. Equilibrium data were adequately fitted to a Langmuir isotherm and the kinetics data fitted well to the pseudo-second-order model. The maximum adsorption capacity provided by Langmuir model was 94.34 mg/g. Finally, the effect of the presence of other heavy metals in water solution on the adsorption of bisphenol A was analyzed. Binary tests revealed competition between the adsorbates and a significant selectivity toward bisphenol A. Finally, the study of the adsorption performance in three consecutive adsorption–desorption cycles showed efficiencies higher than 90% in all cycles, indicating that the activated carbon has good reusability.

scholarly journals β-Cyclodextrin Modified Poly(Acrylonitrule-co-Acrylic Acid) Hydrogel for Thorium(IV) Adsorption

Polymers ◽  
2017 ◽  
Vol 9 (6) ◽  
pp. 201 ◽  
Author(s):  
Guojian Duan ◽  
Qiangqiang Zhong ◽  
Lei Bi ◽  
Liu Yang ◽  
Tonghuan Liu ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Contact Time ◽  
Ph Value ◽  
Water System ◽  
Maximum Adsorption Capacity ◽  
Practical Application ◽  
X Ray Diffraction ◽  
Liquid Ratio ◽  
X Ray ◽  
Solid Liquid

In this report, the β-CD(AN-co-AA) hydrogel was used to remove the thorium(IV) [Th(IV)] from the water system, and the new adsorbent was characterized through Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The influences of contact time, pH value, ionic strength, solid-liquid ratio, initial Th(IV) concentration, and temperature on Th(IV) adsorption onto the functional hydrogel were researched. The results showed that the experimental data followed the Langmuir isotherm and the maximum adsorption capacity (qmax) for Th(IV) was 692 mg/g at pH 2.95, which approached the calculated (qe) 682 mg/g. The desorption capacity of Th(IV) in different HNO3 concentrations ranging from 0.005 to 0.5 M was also studied, and the percentage of the maximum desorption was 86.85% in the condition of 0.09 M HNO3. The selectivity of β-CD(AN-co-AA) hydrogel was also be studied, the results indicated that this material retained the good adsorption capacity to Th(IV) even when the Ca2+, Mg2+, or Pb2+ existed in the system. The findings indicate that β-CD(AN-co-AA) can be used as a new candidate for the enrichment and separation of Th(IV), or its analogue actinides, from large-volume solution in practical application.

scholarly journals Adsorption of Basic and Acidic Dyes onto Agricultural Wastes

2016 ◽  
Vol 70 ◽  
pp. 12-26 ◽  
Author(s):  
Nnaemeka John Okorocha ◽  
J. Josphine Okoji ◽  
Charles Osuji
Keyword(s):  
Adsorption Capacity ◽  
Contact Time ◽  
Adsorption Process ◽  
Aqueous Media ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Thermodynamic Quantities ◽  
Order Kinetic ◽  
Dyes Adsorption ◽  
Adsorbent Dose

The potential of almond leaves powder, (ALP) for the removal of Crystal violet (CV) and Congo red (CR) dyes from aqueous solution was investigated. The adsorbent (ALP) was characterized by FTIR and SEM analysis. Batch adsorption studies were conducted and various parameters such as contact time, adsorbent dosage, initial dye concentration, pH and temperature were studied to observe their effects in the dyes adsorption process. The optimum conditions for the adsorption of CV and CR dyes onto the adsorbent (ALP) was found to be: contact time (100mins), pH (10.0), temperature (343K) for an initial CV dye concentration of 50mg/L using adsorbent dose of 1.0g and contact time (100mins), pH (2.0), temperature (333K) for an initial CR dye concentration of 50mg/L using adsorbent dose 1.0g respectively. The experimental equilibrium adsorption data fitted best and well to the Freundlich isotherm model for both CV and CR dyes adsorption. The maximum adsorption capacity of ALP was found to be 22.96mg/g and 7.77mg/g for the adsorption of CV and CR dyes respectively. The kinetic data conformed to the pseudo-second-order kinetic model. Thermodynamic quantities such as Gibbs free energy (ΔG0), enthalpy (ΔH0) and entropy (ΔS0) were evaluated and the negative values of ΔG0obtained for both dyes indicate the spontaneous nature of the adsorption process while the positive values of ΔH0and ΔS0obtained indicated the endothermic nature and increased randomness during the adsorption process respectively for the adsorption of CV and CR onto ALP. Based on the results obtained such as good adsorption capacity, rapid kinetics, and its low cost, ALP appears to be a promising adsorbent material for the removal of CV and CR dye stuff from aqueous media.

Cadmium Removal from Synthetic Wastewater using Seed Biomass Biosorbent: A Bench-top Reactor Investigation

2021 ◽  
Author(s):  
Deen Dayal Giri ◽  
Jay Mant Jha ◽  
Neha Srivast ◽  
Dan Bahadur Pal
Keyword(s):  
Cadmium Concentration ◽  
Ion Concentration ◽  
Synthetic Wastewater ◽  
Maximum Adsorption Capacity ◽  
Cadmium Removal ◽  
Solution Ph ◽  
Optimization Study ◽  
Seed Biomass ◽  
Optimal Set ◽  
Adsorbent Dose

Abstract The cadmium ion concentration in drinking water is frequently found higher in different part of the world as per international recommendation. It is crucial to reduce concentration in water by sustainable and environmentally friendly means. We tested the biomass of Jamun (JP) and Amaltash (AT) seeds to remove cadmium from synthetic wastewater cost effectively. The biomasses were characterized by functional groups (FTIR), crystalline structures (XRD), and elemental analysis (ICP) techniques. Experimentation the optimization study has been carried out by using Design-software 6.0.8. Response surface methodology has been applied to design the experiments where we have used three factors and three levels Box-Behnken design (BBD). Cadmium removal ability of bio-sorbents were evaluated in bench-top reactor and optimized at various solution pH, adsorbent dose, and cadmium concentration in synthetic wastewater. At initial cadmium concentration 2 mg/litre, pH 6, adsorbent dose 60 mg and stirring speed 300 rpm the cadmium removal was ~95% and ~93% from synthetic wastewater by JP and AT seed biomass, respectively. The adsorption behaviour of cadmium ions well explained following Temkin model (AT r2=0.988; JP r2=0.984) and maximum adsorption capacity 3.88 mg g−1 (JP) and 4.54 mg g−1 (AT) after 70 minutes under optimal set of condition and proved to be an efficient and eco-friendly bio-sorbent for cadmium removal.

Adsorption of Zn(II) from Aqueous Solution by Attapulgite

2014 ◽  
Vol 692 ◽  
pp. 149-155 ◽  
Author(s):  
Jun Ren ◽  
Dan Xu ◽  
Ling Tao ◽  
Zhao Wen Fu
Keyword(s):  
Aqueous Solution ◽  
Ionic Strength ◽  
Contact Time ◽  
Langmuir Adsorption Isotherm ◽  
Maximum Adsorption Capacity ◽  
Order Process ◽  
Langmuir Adsorption ◽  
Pseudo Second Order ◽  
Adsorbent Dose ◽  
Second Order Process

The adsorption behavior of Zn (II) by attapulgite were studied in the paper, The effects of adsorbent dose. Contact time, ionic strength and temperature on the adsorption were investigated. The maximum adsorption capacity is 4.129 mg.g-1 at 333 K. The kinetic study indicated that the adsorption was a pseudo-second-order process. The adsorption was well fitted by the Langmuir adsorption isotherm model. The results indicated that the sorption of Zn (II) by attapulgite was a spontaneous process, and the sorption was endothermic.

scholarly journals A Mineral By-Product from Gasification of Poultry Feathers for Removing Cd from Highly Contaminated Synthetic Wastewater

Minerals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1048
Author(s):  
Zygmunt Mariusz Gusiatin ◽  
Jurate Kumpiene ◽  
Sylwia Janiszewska ◽  
Sławomir Kasiński ◽  
Mariusz Pecio ◽  
...  
Keyword(s):  
Contact Time ◽  
Synthetic Wastewater ◽  
Maximum Adsorption Capacity ◽  
Operational Conditions ◽  
Surface Precipitation ◽  
Initial Ph ◽  
Mineral Components ◽  
High Concentrations ◽  
Poultry Feather ◽  
Cd Removal

Ash from poultry feather gasification was investigated as an adsorbent for Cd removal from synthetic wastewater under a range of operational conditions: initial pH (2–8) and salinity (8–38 mS/cm) of wastewater, ash dosage (2.5–50 g/L), Cd concentration (25–800 mg/L) and contact time (5–720 min). The ash was highly alkaline and had low surface area and micropores averaging 1.12 nm in diameter. Chemical/mineralogical analysis revealed a high content of P2O5 (39.9 wt %) and CaO (35.5 wt %), and the presence of calcium phosphate, hydroxyapatite and calcium. It contained only trace amounts of heavy metals, BTEX, PAHs and PCBs, making it a safe mineral by-product. Cd adsorption was described best with Langmuir and pseudo-second order models. At pH 5, an ash dosage of 5 g/L, 40 min contact time and 100 mg Cd/L, 99% of Cd was removed from wastewater. The salinity did not affect Cd sorption. The maximum adsorption capacity of Cd was very high (126.6 mg/g). Surface precipitation was the main mechanism of Cd removal, possibly accompanied by ion exchange between Cd and Ca, coprecipitation of Cd with Ca-mineral components and Cd complexation with phosphate surface sites. Poultry ash effectively removes high concentrations of toxic Cd from wastewater.

scholarly journals Optimizing the Biosorption Behavior of Ludwigia stolonifera in the Removal of Lead and Chromium Metal Ions from Synthetic Wastewater

2021 ◽  
Vol 13 (11) ◽  
pp. 6390
Author(s):  
Yasser A. El-Amier ◽  
Ashraf Elsayed ◽  
Mohamed A. El-Esawi ◽  
Ahmed Noureldeen ◽  
Hadeer Darwish ◽  
...  
Keyword(s):  
Experimental Data ◽  
Metal Ions ◽  
Contact Time ◽  
Static Condition ◽  
Sorption Process ◽  
Ion Concentration ◽  
Synthetic Wastewater ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Batch Mode

In this study, a natural low-coast, efficient, and eco- bio-sorbent plant material (Ludwigia stolonifera), with both parts of the root and shoot, were studied for the removal of the cationic metal ions, lead Pb2+ and chromium Cr6+, via batch mode experiments to evaluate their maximum adsorption capacity, and held a comparison between the used bio-sorbent roots and shoots, based on the highest bio-sorption potential. Optimization of the bio-sorption parameters, such as contact time, pH, bio-sorbent (root and shoot) dosage, and initial ion concentration was conducted. The results indicated that 1.6 g of the used bio-sorbent shoot material removed 81.4% of Pb2+, and 77% of Cr6+ metal ions from liquid media under the conditions of 100 ppm of initial metal ions concentration at room temperature for 60 min of contact time with the static condition. Different isotherms and kinetic models were fit to the experimental data to understand the nature of the bio-sorption process. The experimental data were best fit by the pseudo-second-order kinetic model with a high correlation coefficient (R2 = 0.999), which reveals the chemisorption nature of the bio-sorption process. The chemical and structural analysis of the used bio-sorbent, before and after Cr6+ and Pb2+ bio-sorption, were performed using different techniques of characterization, such as Scanning Electron Microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR). The used bio-sorbent proved to be a low-cost, efficient, and eco-friendly material to remove heavy metal ions from aqueous solutions.

Sign in / Sign up

Export Citation Format

Share Document