scholarly journals Adsorption and Kinetics Studies of Cu (II) ions Removal from Aqueous Solution by Untreated and Treated Sugarcane Bagasse

2015 ◽  
Vol 17 (3) ◽  
pp. 583-593 ◽  
Keyword(s):  
Sugarcane Bagasse ◽  
Contact Time ◽  
Order Kinetic ◽  
Freundlich Isotherms ◽  
Adsorption Affinity ◽  
Optimum Ph ◽  
Intra Particle Diffusion ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Better Than

<div> <p>Adsorption of Cu (II) ions by untreated sugarcane bagasse (USCB) and treated sugarcane bagasse (TSCB) was investigated. Sugarcane bagasse was treated with 0.1M oxalic acid prior to TSCB adsorption studies. Dependence of Cu (II) adsorption on pH, contact time, temperature and initial concentration of adsorbate solution were also investigated. Optimum pH 2 and contact time of 100 minutes were observed for both USCB and TSCB, while Cu II sorption increased with temperature. Under optimum condition, TSCB adsorbed Cu (II) ions better than USCB (1.854mgg<sup>-1</sup>and 0.556mgg<sup>-1</sup>respectively). Thermodynamic investigations showed that Cu (II) adsorption was feasible, spontaneous and endothermic. Kinetic data was adequately described by Ho&rsquo;s pseudo-second-order kinetic model while intra-particle diffusion model described a slow adsorption affinity. It was concluded that Cu (II) adsorption by sugarcane bagasse is a favourable chemisorption process and was well explained by both Langmuir and Freundlich isotherms.</p> </div> <p>&nbsp;</p>

scholarly journals Development of Cerium Oxide/Corncob Nanocomposite: A Cost-Effective and Eco-Friendly Adsorbent for the Removal of Heavy Metals

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4464
Author(s):  
Sidra Gran ◽  
Rukhsanda Aziz ◽  
Muhammad Tariq Rafiq ◽  
Maryam Abbasi ◽  
Abdul Qayyum ◽  
...  
Keyword(s):  
Experimental Data ◽  
Kinetic Model ◽  
Contact Time ◽  
Cost Effective ◽  
Particle Diffusion ◽  
Order Kinetic ◽  
Removal Of Heavy Metals ◽  
Intra Particle Diffusion ◽  
Order Kinetic Model ◽  
Pseudo Second Order

This research aims to assess the efficiency of the synthesized corncob as a cost-effective and eco-friendly adsorbent for the removal of heavy metals. Therefore, to carry out the intended research project, initially, the corncob was doped with nanoparticles to increase its efficiency or adsorption capacity. The prepared adsorbent was evaluated for the adsorption of cadmium (Cd) and chromium (Cr) from aqueous media with the batch experiment method. Factors that affect the adsorption process are pH, initial concentration, contact time and adsorbent dose. The analysis of Cd and Cr was performed by using atomic absorption spectrometry (AAS), while the characterization of the adsorbent was performed using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results showed that there is a significant difference before and after corncob activation and doping with CeO2 nanoparticles. The maximum removal for both Cd and Cr was at a basic pH with a contact time of 60 min at 120 rpm, which is 95% for Cd and 88% for Cr, respectively. To analyze the experimental data, a pseudo-first-order kinetic model, pseudo-second-order kinetic model, and intra-particle diffusion model were used. The kinetic adsorption studies confirmed that the experimental data were best fitted with the pseudo-second-order kinetic model (R2 = 0.989) and intra-particle diffusion model (R2 = 0.979). This work demonstrates that the cerium oxide/corncob nanocomposite is an inexpensive and environmentally friendly adsorbent for the removal of Cd and Cr from wastewater.

scholarly journals Removal of Pb(II) using Hydroxyapatite from Golden Snail Shell (Pomacea canaliculata L.) Modified with Silica

Molekul ◽  
2020 ◽  
Vol 15 (2) ◽  
pp. 130
Author(s):  
Poedji Loekitowati Hariani ◽  
Fahma Riyanti ◽  
Fatma Fatma ◽  
Addy Rachmat ◽  
Aldi Herbanu
Keyword(s):  
Contact Time ◽  
Second Order ◽  
Pomacea Canaliculata ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Parameters ◽  
First Order ◽  
Optimum Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The composites of hydroxyapatite and SiO2 were successfully synthesized. The hydroxyapatite was prepared from golden snail shells (Pomacea canaliculata L). The hydroxyapatite and hydroxyapatite-SiO2 composites were characterized using XRD, FTIR, SEM-EDS. Furthermore, hydroxyapatite and hydroxyapatite-SiO2 composites were used to remove Pb(II) from aqueous solution. Various adsorption parameters such as pH of the solution, contact time, and initial Pb(II) concentration were used to study the adsorption process. The optimum pH of the solution for removal of Pb(II) by hydroxyapatite and hydroxyapatite-SiO2 composite at pH 6 and contact time at 60 minutes. Both adsorbents follow the Langmuir isotherm. The maximum adsorption capacity of the hydroxyapatite-SiO2 composite is greater compare to hydroxyapatite, respectively 135.14 and 123.46 mg/g. The pseudo-second order kinetic model had a correlation coefficient (R2) greater than the pseudo-first order so pseudo-second order kinetic is better to describe adsorption kinetics

Adsorption of enrofloxacin from aqueous solution by bentonite

Clay Minerals ◽  
2013 ◽  
Vol 48 (4) ◽  
pp. 627-637 ◽  
Author(s):  
J. X. Zhang ◽  
Q. X. Zhou ◽  
W. Li
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Adsorption Equilibrium ◽  
Order Kinetic ◽  
Batch Experiments ◽  
Freundlich Model ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Better Than

AbstractThe removal of enrofloxacin, a fluoroquinolone antibiotic, from aqueous solution by adsorption onto bentonite was investigated in this study. The effects of initial concentrations, contact time and temperature on the adsorption of enrofloxacin were studied via batch experiments. The adsorption equilibrium was achieved within 60 min for all studied concentrations. The adsorption capacity increased with the increase of initial concentration within a concentration range. Higher temperatures were favourable for the adsorption. The change of Gibbs free energy (ΔG°), change of enthalpy (ΔH°) and change of entropy (ΔS°) were evaluated and the results indicate that the adsorption should be an endothermic and spontaneous process. The Langmuir isotherm model fitted to the experimental data better than the Freundlich model. The adsorption follows the pseudo-second order kinetic model.

scholarly journals Application ofGlycyrrhiza glabraRoot as a Novel Adsorbent in the Removal of Toluene Vapors: Equilibrium, Kinetic, and Thermodynamic Study

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Fazel Mohammadi-Moghadam ◽  
Mohammad Mehdi Amin ◽  
Mehdi Khiadani (Hajian) ◽  
Fariborz Momenbeik ◽  
Heshmatollah Nourmoradi ◽  
...  
Keyword(s):  
Contact Time ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Freundlich Model ◽  
Adsorbate Concentration ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Kinetic And Thermodynamic Study ◽  
Better Than

The aim of this paper is to investigate the removal of toluene from gaseous solution throughGlycyrrhiza glabraroot (GGR) as a waste material. The batch adsorption experiments were conducted at various conditions including contact time, adsorbate concentration, humidity, and temperature. The adsorption capacity was increased by raising the sorbent humidity up to 50 percent. The adsorption of toluene was also increased over contact time by 12 h when the sorbent was saturated. The pseudo-second-order kinetic model and Freundlich model fitted the adsorption data better than other kinetic and isotherm models, respectively. The Dubinin-Radushkevich (D-R) isotherm also showed that the sorption by GGR was physical in nature. The results of the thermodynamic analysis illustrated that the adsorption process is exothermic. GGR as a novel adsorbent has not previously been used for the adsorption of pollutants.

scholarly journals Biosorption of Congo Red and Methylene Blue by pretreated waste Streptomyces fradiae biomass - Equilibrium, kinetic and thermodynamic studies

2018 ◽  
Vol 83 (1) ◽  
pp. 107-120 ◽  
Author(s):  
Zdravka Velkova ◽  
Gergana Kirova ◽  
Margarita Stoytcheva ◽  
Velizar Gochev
Keyword(s):  
Methylene Blue ◽  
Congo Red ◽  
Contact Time ◽  
Order Kinetic ◽  
Batch Experiments ◽  
Streptomyces Fradiae ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Kinetic And Thermodynamic Studies ◽  
Pretreated Biomass

Pretreated waste Streptomyces fradiae biomass was utilized as an eco-friendly sorbent for Congo Red (CR) and Methylene Blue (MB) removal from aqueous solutions. The biosorbent was characterized by Fourier transform infrared spectroscopy. Batch experiments were conducted to study the effect of pH, biosorbent dosage, initial concentration of adsorbates, contact time and temperature on the biosorption of the two dyes. The equilibrium adsorption data were analysed using Freundlich and Langmuir models. Both models fitted well the experimental data. The maximum biosorption capacity of the pretreated Streptomyces fradiae biomass was 46.64 mg g-1 for CR and 59.63 mg g-1 for MB, at a pH 6.0, with the contact time of 120 min, the biosorbent dosage of 2 g dm-3 and the temperature of 298 K. Lagergren and Ho kinetic models were used to analyse the kinetic data obtained from different batch experiments. The biosorption of both dyes followed better the pseudo-second order kinetic model. The calculated values for ?G, ?S, and ?H indicated that the biosorption of CR and MB onto the waste pretreated biomass was feasible, spontaneous, and exothermic in the selected temperature range and conditions.

scholarly journals Adsorption of Cr(VI) ions onto goethite, activated carbon and their composite: kinetic and thermodynamic studies

2020 ◽  
Vol 10 (9) ◽  
Author(s):  
G. B. Adebayo ◽  
H. I. Adegoke ◽  
Sidiq Fauzeeyat
Keyword(s):  
Activated Carbon ◽  
Heavy Metal Contamination ◽  
Stem Bark ◽  
Order Kinetic ◽  
Adsorption Capacities ◽  
Optimum Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Daniellia Oliveri ◽  
Kinetic And Thermodynamic Studies

Abstract Hexavalent chromium was adsorbed from aqueous solution with three prepared and characterized adsorbents, namely goethite (G), activated carbon (AC) and their composite (GAC). The goethite particle was synthesized using the precipitation methods, and activated carbon was prepared from the stem bark of Daniellia oliveri tree and composite in a ratio of 1:5 goethite–activated carbon. The adsorption capacities of G, AC and GAC for Cr(VI) are 6.627, 5.455 and 6.354 mg/g with 0.02 g adsorbent within contact time of 60, 180 and 30 min for G, AC and GAC, respectively, for Cr(VI) adsorption at optimum pH of 3. The isotherm studied was best explained by Langmuir adsorption isotherm and fitted with the pseudo-second-order kinetic model. Desorption studies showed that 1.0 M HNO3 was a better desorbing agent than 0.1 M HNO3, 0.1 M HCl and 1.0 M HCl. Chromium was most desorbed (94.60% in Cr//G using 1 M HNO3). The result obtained revealed that goethite and activated carbon produced are favourable adsorbents and the composite of the two adsorbents gives a more favourable, economical and affordable adsorbent for the clean-up of heavy metal contamination.

scholarly journals Preparation of chitosan/amine modified diatomite composites and adsorption properties of Hg(II) ions

2018 ◽  
Vol 77 (5) ◽  
pp. 1363-1371 ◽  
Author(s):  
Yong Fu ◽  
Yue Huang ◽  
Jianshe Hu ◽  
Zhengjie Zhang
Keyword(s):  
Schiff Base ◽  
Contact Time ◽  
Ph Value ◽  
Adsorption Properties ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorption Effect ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Modified Diatomite

Abstract A green functional adsorbent (CAD) was prepared by Schiff base reaction of chitosan and amino-modified diatomite. The morphology, structure and adsorption properties of the CAD were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy and Brunauer Emmett Teller measurements. The effect of pH value, contact time and temperature on the adsorption of Hg(II) ions for the CAD is discussed in detail. The experimental results showed that the CAD had a large specific surface area and multifunctional groups such as amino, hydroxyl and Schiff base. The optimum adsorption effect was obtained when the pH value, temperature and contact time were 4, 25 °C and 120 min, respectively, and the corresponding maximum adsorption capacity of Hg(II) ions reached 102 mg/g. Moreover, the adsorption behavior of Hg(II) ions for the CAD followed the pseudo-second-order kinetic model and Langmuir model. The negative ΔG0 and ΔH0 suggested that the adsorption was a spontaneous exothermic process.

Adsorption of Pb(II) from Aqueous Solutions on Dithizone-Immobilized Coal Fly Ash

2020 ◽  
Vol 840 ◽  
pp. 57-63
Author(s):  
Dina Fitriana ◽  
Mudasir Mudasir ◽  
Dwi Siswanta
Keyword(s):  
Fly Ash ◽  
Adsorption Isotherm ◽  
Contact Time ◽  
Coal Fly Ash ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Activated Coal ◽  
Concentration Of Ions ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Adsorption of Pb(II) ions onto selective adsorbent of dithizone-immobilized coal fly ash (DCFA) from Holcim, Cilacap, Indonesia has been investigated in batch experiments. Prepared coal fly ash (CFA) modified by immobilization of dithizone previously were characterized by FT-IR and XRD. Several parameters influencing the adsorption of Pb(II) ions such as effect of pH, adsorbent dosage, contact time and initial concentration of ions on the efficiency of the adsorption were studied. The optimum condition of Pb(II) adsorption was found at pH 5, adsorbent dosage 0.1 g, contact time 60 min and initial Pb(II) ions concentration of 60 mg L–1. The adsorption kinetics of Pb(II) ions on DCFA was found to follow a pseudo-second-order kinetic model. The adsorption isotherm data were fitted to the Langmuir model. Kinetics and adsorption isotherm studies suggest that the capacity and affinity of the DCFA in adsorbing Pb(II) ions is significantly improved compared to those of non-immobilized activated coal fly ash (ACFA).

Removal of fluoride from aqueous solution by adsorption onto Kanuma mud

2010 ◽  
Vol 62 (8) ◽  
pp. 1888-1897 ◽  
Author(s):  
Nan Chen ◽  
Zhenya Zhang ◽  
Chuanping Feng ◽  
Miao Li ◽  
Rongzhi Chen ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Fluoride Concentration ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
Solution Ph ◽  
Intra Particle Diffusion ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Solid Liquid Interface ◽  
Solid Liquid

Kanuma mud, a geomaterial, is used as an adsorbent for the removal of fluoride from water. The influences of contact time, solution pH, adsorbent dosage, initial fluoride concentration and co-existing ions were investigated by batch equilibration studies. The rate of adsorption was rapid with equilibrium being attained after about 2 h, and the maximum removal of fluoride was obtained at pH 5.0–8.0. The Freundlich isotherm model was found to represent the measured adsorption data well. The negative value of the thermodynamic parameter ΔG suggests the adsorption of fluoride by Kanuma mud was spontaneous, the endothermic nature of adsorption was confirmed by the positive ΔH value. The negative ΔS value for adsorbent denoted decreased randomness at the solid/liquid interface. The adsorption process using Kanuma mud followed the pseudo-second-order kinetic model. Fluoride uptake by the Kanuma mud was a complex process and intra-particle diffusion played a major role in the adsorption process. It was found that adsorbed fluoride could be easily desorbed by washing the adsorbent with a solution of pH 12. This indicates the material could be easily recycled.

Adsorption mechanism of As(V) and As(III) on Fe–Mn binary oxides in synthetic and real water matrices

2016 ◽  
Vol 16 (4) ◽  
pp. 992-1001 ◽  
Author(s):  
Jasmina Nikić ◽  
Jasmina Agbaba ◽  
Malcolm Watson ◽  
Snežana Maletić ◽  
Jelena Molnar Jazić ◽  
...  
Keyword(s):  
Adsorption Mechanism ◽  
Adsorption Equilibrium ◽  
Order Kinetic ◽  
Freundlich Isotherms ◽  
Binary Oxides ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Adsorption Equilibrium Data ◽  
The Eu

A series of Fe–Mn binary oxides with different Fe:Mn ratios (1:1, 3:1, 6:1, 9:1) were synthesized to investigate the optimal Fe:Mn ratio for the removal of As(III) and As(V). Batch experiments were performed to determine the rate of adsorption and equilibrium isotherms. Adsorption kinetics were well described by the pseudo-second-order kinetic model for both As(III) and As(V). The adsorption equilibrium data fitted well to Langmuir and Freundlich isotherms. The maximum As(V) sorption capacity was observed at an Fe:Mn ratio of 6:1 (65.0 mg/g), whereas maximum As(III) uptake was at Fe:Mn ratio 3:1 (46.9 mg/g). Arsenic levels in real water samples were reduced from 37 μg/l to below the EU Water Framework Directive limit (10 μg/L) after treatment with Fe–Mn adsorbents.

Sign in / Sign up

Export Citation Format

Share Document