scholarly journals Friction and Wear Properties of Automobile Brake Linings Containing Borax Powder with Different Grain Sizes

2021 ◽  
pp. 224-227
Author(s):  
İlker SUGÖZÜ ◽  
Banu SUGÖZÜ
Keyword(s):  
Friction And Wear ◽  
Wear Properties ◽  
Grain Sizes ◽  
Friction And Wear Properties

The Analysis on the Tribological Properties of TPU/PVC Blends under Oil Lubrication

2013 ◽  
Vol 774-776 ◽  
pp. 94-98
Author(s):  
Dao Yuan Pan ◽  
Peng Peng Wu ◽  
Zhong Xue Gao ◽  
Yu Zeng Zhang
Keyword(s):  
Working Conditions ◽  
Friction And Wear ◽  
Oil Lubrication ◽  
Wear Properties ◽  
Operation Conditions ◽  
Hydraulic Steering ◽  
Pros And Cons ◽  
Friction And Wear Properties ◽  
Lubrication Conditions ◽  
Better Than

Based on actual working conditions and parameters of the hydraulic steering gear, the purpose is optimizing the rubber seal of steering gear by different rubbers mixing technology. Compare the five kinds of rubber with metal of the friction characteristics in dynamic fit, it can obtain a performance excellent rubber real in the specific operation conditions. And then improve the overall service life of the steering gear. It is first prepared the same hardness TPU and PVC and blends that the ratio is 3:7, 5:5and7:3 in this article. The pros and cons of the five rubbers are analyzed in friction and wear properties of the above experimental. The test curve of coefficient friction and wear with time has been done under different load at constant low speed. It determines TPU/PVC = 3:7 blends through friction and wear and wear mechanism of five rubbers with steel comparatively analyses, and the heat resistance and wear resistance of them are better than the other TPU/PVC blends and PVC under oil lubrication conditions.

Amorphous Carbon Coatings for Locally Adjusted Tribological Properties in Sheet Bulk Metal Forming

2012 ◽  
Vol 504-506 ◽  
pp. 969-974 ◽  
Author(s):  
Harald Hetzner ◽  
Stephan Tremmel ◽  
Sandro Wartzack
Keyword(s):  
Amorphous Carbon ◽  
Tribological Properties ◽  
Metal Forming ◽  
Friction And Wear ◽  
Wear Properties ◽  
Carbon Coatings ◽  
Bulk Metal ◽  
Bulk Metal Forming ◽  
Friction And Wear Properties ◽  
Amorphous Carbon Coatings

In sheet bulk metal forming, locally adapted friction properties of the contact tool/workpiece are an appropriate means for the targeted enhancement of the material flow, enabling an improved form filling and lowered forming forces. However, the implementation of desirable friction conditions is not trivial. And further, friction is inseparably linked to wear and damage of the contacting surfaces. This calls for a methodological approach in order to consider tribology as a whole already in the early phases of process layout, so that tribological measures which allow fulfilling the requirements concerning local friction and wear properties of the tool surfaces, can already be selected during the conceptual design of the forming tools. Thin tribological coatings are an effective way of improving the friction and wear properties of functional surfaces. Metal-modified amorphous carbon coatings, which are still rather new to the field of metal forming, allow tackling friction and wear simultaneously. Unlike many other types of amorphous carbon, they have the mechanical toughness to be used in sheet bulk metal forming, and at the same time their friction properties can be varied over wide ranges by proper choice of the deposition parameters. Based on concrete research results, the mechanical, structural and special tribological properties of tungsten-modified hydrogenated amorphous carbon coatings (a-C:H:W) are presented and discussed against the background of the tribological requirements of a typical sheet bulk metal forming process.

Friction and Wear Properties of Magnetron Sputtered DLC/SiC Films on Magnesium Alloy

2009 ◽  
Vol 610-613 ◽  
pp. 853-858 ◽  
Author(s):  
Xiao Jing Xu ◽  
Deng Fu Xia
Keyword(s):  
Friction And Wear ◽  
High Hardness ◽  
High Wear Resistance ◽  
Modulus Ratio ◽  
Wear Properties ◽  
Silicon Carbon ◽  
Alloy Az91d ◽  
The Mean ◽  
Friction And Wear Properties ◽  
Sic Films

The nano-indentation response and the friction/wear properties of DLC/SiC (diamond-like carbon/silicon carbon) double layer thin films deposited on Mg alloy (AZ91D) substrate using magnetron sputtering technique at room temperature were investigated. The results show that the DLC films displayed low nano-hardness (3.05 GPa), low Young's modulus (24.67 GPa) but high hardness-to-modulus ratio (0.124). The films-substrate system exhibited a good friction and wear properties with the mean friction coefficient of about 0.175, the special wear rate in the magnitude order of 10−6 mm3 m−1 N−1 together with little film-cracking and interface-delaminating, when sliding against Si3N4 (silicon nitride) ball using ball-on-disc wear tester under dry frictional condition. The high wear-resistance is in accordance with high ductility of the films, good modulus match in the films-substrate system, and high hardness-to-modulus ratio of the films. The underlying factors are discussed and are believed to be due to the substrate is Mg, a metal with high activity.

Sign in / Sign up

Export Citation Format

Share Document