Review on Modification of Poly (lactic acid) in Physical and Mechanical Properties

2021 ◽  
Author(s):  
Wei Zou ◽  
◽  
Jintao Huang ◽  
Jingtao Su ◽  
Wei Zeng ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Physical And Mechanical Properties ◽  
Poly Lactic Acid

Short Review: Potential Production of Acacia Wood and its Biocomposites

2018 ◽  
Vol 917 ◽  
pp. 37-41 ◽  
Author(s):  
Muhammad Khusairy bin Bakri ◽  
Elammaran Jayamani ◽  
Soon Kok Heng ◽  
Akshay Kakar
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Review Paper ◽  
Natural Fiber ◽  
Physical And Mechanical Properties ◽  
Short Review ◽  
Fiber Composites ◽  
Poly Lactic Acid ◽  
Hybrid Polymer ◽  
Potential Production

In this short review paper, the physical and mechanical properties of acacia wood, poly lactic acid (PLA) and polyhydroxyalkanoates (PHA) were analyzed. Existing factors that affect the mechanical properties of natural fiber composites were investigated and identified. By knowing these factors, a possibility and potentiality in implementing the natural acacia wood reinforced material with hybrid polymer were discussed. It was found that the acacia wood had the potential to re-condition soil and have the potential to become reinforced materials in hybrid polymer composites. In addition, using fully biodegradable polymer such as PLA and PHA made it sustainable and environmentally friendly.

Effect of surface treatment on the physical and mechanical properties of injection molded poly(lactic acid)‐coir fiber biocomposites

2018 ◽  
Vol 40 (6) ◽  
pp. 2132-2141 ◽  
Author(s):  
M.E. González‐López ◽  
A.A. Pérez‐Fonseca ◽  
R. Manríquez‐González ◽  
M. Arellano ◽  
D. Rodrigue ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Surface Treatment ◽  
Physical And Mechanical Properties ◽  
Poly Lactic Acid ◽  
Coir Fiber ◽  
Injection Molded ◽  
Effect Of Surface

scholarly journals Study of the Physical and Mechanical Properties of Thermoplastic Starch/Poly(Lactic Acid) Blends Modified with Acid Agents

Processes ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 578
Author(s):  
Carolina Caicedo ◽  
Heidy Lorena Calambás Pulgarin
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Organic Acids ◽  
Physical And Mechanical Properties ◽  
Thermoplastic Starch ◽  
Poly Lactic Acid ◽  
Thermal Transitions ◽  
Surface Polarity ◽  
Acid Agent ◽  
Structural Affinity

In this work, we present a functionalization strategy of starch-poly(lactic acid) (PLA) blends with organic acids. Lactic and acetic acid were used as acid agents, and oleic acid was also included in the previous acids, with the aim of finding a synergy that thermodynamically benefits the products and provides hydrophobicity. The ratio of starch and sorbitol was 70:30, and the added acid agent replaced 6% of the plasticizer; meanwhile, the thermoplastic starch (TPS)–PLA blend proportion was 70:30 considering the modified TPS. The mixtures were obtained in a torque rheometer at 50 rpm for 10 min at 150 °C. The organic acids facilitated interactions between TPS and PLA. Although TPS and PLA are not miscible, PLA uniformly dispersed into the starch matrix. Furthermore, a reduction in the surface polarity was achieved, which enabled the wettability to reach values close to those of neat PLA (TPS–L-PLA increased by 55% compared to TPS–PLA). The rheological results showed a modulus similar to that of TPS. In general, there were transitions from elastic to viscous, in which the viscous phase predominated. The first and second-order thermal transitions did not show significant changes. The structural affinity of lactic acid with biopolymers (TPS–L-PLA) allowed a greater interaction and was corroborated with the mechanical properties, resulting in a greater resistance with respect to pure TPS and blended TPS–PLA (28.9%). These results are particularly relevant for the packaging industry.

scholarly journals Preparation of Organo-Montmorillonite Modified Poly(lactic acid) and Properties of Its Blends with Wood Flour

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 204 ◽  
Author(s):  
Ru Liu ◽  
Xiaoqian Yin ◽  
Anmin Huang ◽  
Chen Wang ◽  
Erni Ma
Keyword(s):  
Mechanical Properties ◽  
Cell Wall ◽  
Lactic Acid ◽  
Wood Flour ◽  
Physical And Mechanical Properties ◽  
Poly Lactic Acid

In this study, poly(lactic acid) (PLA)/wood flour (WF) composites were prepared by first blending PLA with organo-montmorillonite (OMMT) at different contents (0.5, 1, 1.5, and 2 wt %). The physical and mechanical properties of the virgin and OMMT modified PLA and its WF composites were tested. The results showed that: (1) at low OMMT content (<1 wt %), OMMT can uniformly disperse into the PLA matrix with highly exfoliated structures. When the content increased to 1.5 wt %, some aggregations occurred; (2) after a second extruding process, the aggregated OMMT redistributed into PLA and part of OMMT even penetrated into the WF cell wall. However, at the highest OMMT content (2 wt %), aggregates still existed; (3) the highly exfoliated OMMT was beneficial to the physical and mechanical properties of PLA and the WF composites. The optimal group of OMMT-modified PLA was found at an OMMT content of 0.5 wt %, while for the PLA/WF system, the best properties were achieved at an OMMT content of 1.5 wt %.

Physical and Mechanical Properties of Poly(Butylene Succinate) and Poly(Lactic Acid) under Landfill Conditions

2020 ◽  
Vol 856 ◽  
pp. 245-252
Author(s):  
Narumon Seeponkai ◽  
Krisana Poolsawat
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Physical And Mechanical Properties ◽  
Degradation Process ◽  
Chain Scission ◽  
Poly Lactic Acid ◽  
Ester Bond ◽  
Butylene Succinate ◽  
Erosion Mechanism ◽  
Scanning Electron

In this study, the disintegration of poly(butylene succinate)(PBS) and poly(lactic acid) (PLA) under landfill conditions was investigated. Both polymers were melted, injected into a dumbbell-shape, and buried under the soil for 20 weeks. The morphology of the polymer from the scanning electron microscope (SEM) revealed that, after 6 weeks of the burial, the PBS polymer produced many micro-voids in the bulk of polymer. The amount of the voids increased with time. While the morphology of PLA showed a few voids and some cracks during the degradation process. Moreover, the mechanical properties of the PLA were decreased after 2 weeks following with PBS after 4 weeks of the burial times. The weight loss and the water uptake of PBS and PLA were slightly increased. From the result, it was found that the degradation of PBS and PLA proceeds via random chain scission of the ester bond through bulk erosion mechanism. The degradation of PLA degraded faster than the PBS due to the low crystallinity in the polymer chain. This result can be applied to the design waste management of biodegradable polymer products.

Sign in / Sign up

Export Citation Format

Share Document