scholarly journals UTILIZATION OF ZEOLITS FOR WATER FILING

2019 ◽  
Vol 3 (1) ◽  
Author(s):  
Sajaratud Dur
Keyword(s):  
Particle Size ◽  
Water Analysis ◽  
Water Purification ◽  
Natural Zeolite ◽  
Purification Process ◽  
Before And After ◽  
Adsorbent Particle ◽  
Grinding Mill

<p>This study aims to obtain zeolite powder from Sarulla natural zeolite as an adsorbent, particle size of zeolite powder, and water analysis before and after water purification. The benefit is to increase the benefits of zeolite to a higher economic value.The method used is the grinding mill method to smooth the zeolite chunks. Whereas the water purification process uses a screening process.The results of this study were zeolite produced at 200 mesh or 74 microns, and the purification was successfully carried out.The conclusion of this study is that zeolite powder obtained from Sarulla natural zeolite as an adsorbent, obtained zeolite particles namely 200 mesh or 74 microns, and the water purification process was successfully carried out.</p>

scholarly journals INVESTIGATION OF THE INFLUENCE OF PARTICLE SIZE OF RICE HUSK ASH AS ADSORBENT FOR MERCURY IN COLUMN ADSORPTION SYSTEM

Konversi ◽  
2021 ◽  
Vol 10 (2) ◽  
Author(s):  
Desi Nurandini ◽  
Riani Ayu Lestari ◽  
Isna Syauqiah ◽  
Ahmad Rizalli ◽  
Ryan Rahmatullah
Keyword(s):  
Heavy Metals ◽  
Particle Size ◽  
Rice Husk ◽  
Adsorption Process ◽  
Rice Husk Ash ◽  
Liquid Waste ◽  
Silica Content ◽  
Column Adsorption ◽  
Before And After ◽  
Adsorbent Particle

The presence of heavy metal mercury (Hg2+) in liquid waste has caused serious problems to environmental pollution. One of the most effective method to reduce the levels of heavy metals mercury (Hg2+) in liquid waste is adsorption. Rice husk ash is highly potential to adsorb heavy metals in water because it is a porous material with a high silica content. Therefore, rice husk ash can be used as an adsorbent for heavy metals in liquid waste. The purpose of this study was to determine the level of mercury (Hg2+) that can be adsorbed from the column adsorption process using adsorbent of rice husk ash and to determine the optimum mass of rice husk ash as an adsorbent. The research was conducted using a series of simple adsorption column tools with a circulation time of 120 minutes. While the independent variables were adsorbent particle size of 50, 100, and 200 mesh. Measurement of mercury (Hg2+) levels was carried out on samples before and after treatment with Atomic Absorption Spectrophotometer (AAS). The results showed a significant decrease in Hg2+ levels with the optimum adsorbent particle size of 200 mesh. The value of the adsorbed Hg2+ ion content reached 101.670 mg/L in the adsorption process using adsorbent with 200 mesh particle size . 

scholarly journals ADSORPTION OF AFLATOXIN B1 IN CORN ON NATURAL ZEOLITE AND BENTONITE

2012 ◽  
Vol 12 (3) ◽  
pp. 279-286 ◽  
Author(s):  
Nuryono Nuryono ◽  
Ali Agus ◽  
Sri Wedhastri ◽  
Y.M.S. Maryudhani ◽  
Deni Pranowo ◽  
...  
Keyword(s):  
Particle Size ◽  
Natural Zeolite ◽  
High Performance ◽  
Aqueous Suspension ◽  
Hplc Method ◽  
Elisa Method ◽  
Batch System ◽  
Before And After ◽  
Standard Solution ◽  
The Difference

A study on adsorption of AFB1 in corn (kernel and grained) on natural zeolite and bentonite has been investigated. The first work was adsorption in a batch system of standard AFB1 solution on adsorbents. Some factors such as contact time, concentration of AFB1 and particle size of adsorbent were evaluated. The amount of AFB1 adsorbed was calculated based on the difference of AFB1 concentration before and after adsorption determined by high performance liquid chromatography (HPLC) method. Adsorption of AFB1 in corn sample was emphasized by mixing aqueous suspension of sample with adsorbent. Concentration of AFB1 in suspension was analyzed by enzyme-linked immuno-sorbent assay (ELISA) method. Result shows that adsorption of AFB1 on adsorbents of natural zeolite and bentonite is very fast. Within 15 min 99% of AFB1 (200 ng/mL) has been adsorbed by 25 mg of bentonite and 96% by zeolite. The particle size higher than 200 mesh did not give significant effect on the AFB1 adsorption capability. Effectiveness of zeolite in adsorbing AFB1 is lower than that of bentonite. Capability in reducing AFB1 contamination in corn samples (kernel and meal) for both adsorbents is lower than that in standard solution.

scholarly journals An evaluation of a water purification system for use in animal facilities

1984 ◽  
Vol 18 (1) ◽  
pp. 45-51 ◽  
Author(s):  
T. H. Raynor ◽  
E. L. White ◽  
J. M. Cheplen ◽  
J. M. Sherrill ◽  
T. E. Hamm
Keyword(s):  
Drinking Water ◽  
Water Purification ◽  
Water Samples ◽  
Bacterial Colonization ◽  
Purification Process ◽  
Time Points ◽  
Water Purification System ◽  
Purification System ◽  
Before And After ◽  
Volatile Halocarbon

A commercially available water purification system was evaluated for its ability to minimize chemical and microbial contaminants. The reduction or removal of these impurities from the drinking water of experimental animals would reduce experimental variability. 3 strains of bacteria were collected from the processed water. An increase in the total number of bacteria was observed the longer the filters remained in use. Determinations of heavy metals in water samples before and after processing were made for lead, zinc, copper, nickel, manganese, iron, arsenic and mercury. Calcium and magnesium levels were also determined. The concentrations of these inorganic chemicals were reduced by the purification process except at 2 time points in which desorption of the chemical could have occurred. Bacterial colonization and desorption of these chemicals were controlled by installing new filter cartridges. Volatile halocarbon concentrations were determined for water samples before and after purification. All volatile halocarbons analyzed were less than 10 ppb before and after purification at all time points. Other organic chemicals were greatly reduced by the purification process. In a study of contaminants associated with installation of the unit, it was found that flushing the unit for 8 days reduced lead and methyl ethyl ketone concentrations to insignificant levels. The purification system was found to be effective in providing high quality drinking water as verified by a microbial and chemical testing program.

Effect of particle size and delignification on the rate of digestion of hemicellulose and cellulose by cellulase in mature pangola grass stems

1983 ◽  
Vol 34 (3) ◽  
pp. 241 ◽  
Author(s):  
CW Ford
Keyword(s):  
Particle Size ◽  
Cell Walls ◽  
Trichoderma Viride ◽  
Structural Features ◽  
Cell Wall Polysaccharides ◽  
Particle Size Reduction ◽  
Digitaria Decumbens ◽  
Hemicellulose Degradation ◽  
Before And After ◽  
The Difference

Stem cell walls of pangola grass (Digitaria decumbens) were ground to two particle sizes (c. 1 and 0.1 mm diameter), and incubated with cellulase (ex. Trichoderma viride) for varying times before and after delignification. Total cell walls finely ground (0.1 mm) with a Spex Shatterbox mill were initially degraded more rapidly (to 24 h) than delignified 1 mm particles. Thereafter the delignified material was solubilized to a greater extent. Subsequent specific determinations of cell wall polysaccharides indicated that delignification increased the rate of hemicellulose degradation to a greater extent than did particle size reduction, whereas the opposite was found for cellulose. The difference between delignified and Spex-ground residues, in terms of the amount of polysaccharide digested, was much greater for cellulose than hemicellulose. It is concluded that structural features play a more important role in limiting cellulase degradation of cellulose than does association with lignin, the reverse being so for hemicellulose.

scholarly journals Experimental Investigation of Wave Velocity-Permeability Model for Granite Subjected to Different Temperature Processing

Geofluids ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Guanghui Jiang ◽  
Jianping Zuo ◽  
Teng Ma ◽  
Xu Wei
Keyword(s):  
Particle Size ◽  
High Temperature ◽  
Wave Velocity ◽  
Pore Fluid ◽  
Rock Matrix ◽  
Permeability Model ◽  
Wave Velocities ◽  
Before And After ◽  
Different Temperatures ◽  
Increasing Temperature

Understanding the change of permeability of rocks before and after heating is of great significance for exploitation of hydrocarbon resources and disposal of nuclear waste. The rock permeability under high temperature cannot be measured with most of the existing methods. In this paper, quality, wave velocity, and permeability of granite specimen from Maluanshan tunnel are measured after high temperature processing. Quality and wave velocity of granite decrease and permeability of granite increases with increasing temperature. Using porosity as the medium, a new wave velocity-permeability model is established with modified wave velocity-porosity formula and Kozeny-Carman formula. Under some given wave velocities and corresponding permeabilities through experiment, the permeabilities at different temperatures and wave velocities can be obtained. By comparing the experimental and the theoretical results, the proposed formulas are verified. In addition, a sensitivity analysis is performed to examine the effect of particle size, wave velocities in rock matrix, and pore fluid on permeability: permeability increases with increasing particle size, wave velocities in rock matrix, and pore fluid; the higher the rock wave velocity, the lower the effect of wave velocities in rock matrix and pore fluid on permeability.

DEVELOPMENT OF CONTINUOUS ANTI-SOLVENT RECRYSTALLIZATION METHOD TO PRODUCE CEFTRIAXONE SODIUM NANO CRYSTALS INJECTION USING CERAMIC FILTRATION

2021 ◽  
Vol 74 (9) ◽  
pp. 2323-2336
Author(s):  
Firas Aziz Rahi ◽  
Krar Kadhim Mj
Keyword(s):  
Particle Size ◽  
Water Purification ◽  
Porous Ceramic ◽  
Ceramic Filter ◽  
Dissolution Time ◽  
Mixing Rate ◽  
Ceftriaxone Sodium ◽  
Continuous Recrystallization ◽  
Ceramic Filtration ◽  
Clear Solution

The aim: In this work we developed a method of continuous recrystallization to meet industrial requirements. Materials and methods: Continuous recrystallization method was investigated using porous ceramic filter for water purification with pour size less than 1 μm, that ensures high mixing rate of ethanol and water. Results and conclusions: The results of experiments using crystallization through ceramic filter, gives superior products in particle size, and produced needle shaped ceftriaxone crystals form, that showed significant improvement in dissolution time and obtained ceftriaxone sodium powder to be reconstituted in injectable formula that give clear solution without insoluble microparticles.

Study dearomatization of diesel fuel under the infulence of magnetic field by IR spectroscopy

2021 ◽  
pp. 2150122
Author(s):  
B. G. Abdulov ◽  
A. A. Hasanov
Keyword(s):  
Magnetic Field ◽  
Polycyclic Aromatic Hydrocarbons ◽  
Sulfuric Acid ◽  
Ir Spectroscopy ◽  
Aromatic Hydrocarbons ◽  
Diesel Fraction ◽  
Oil Refining ◽  
Purification Process ◽  
Before And After ◽  
Polycyclic Aromatic

The purification process of polycyclic aromatic hydrocarbons was carried out by extraction of diesel fraction from the primary oil refining using the effect of magnetic field. A mixture of N-methylpyrrolidone with sulfuric acid was used as an extractant. The content of aromatic hydrocarbons in the diesel fraction decreased by 39.8% under normal conditions and by 50.8% under the influence of magnetic field after extraction. The samples were investigated by infrared (IR) spectroscopy method before and after extraction. Vibartional modes corresponding to different atomic bonds have been observed. Deodorization of diesel was determined by interpreting obtained modes.

scholarly journals Pengujian Zeolit Alam Mordenit Sebagai Penjerap Proses Pendegradasian Kandungan Amonium di dalam Air Tambak

2020 ◽  
Vol 21 (1) ◽  
pp. 49-55
Author(s):  
Nuryoto Nuryoto ◽  
Teguh Kurniawan ◽  
Indar Kustiningsih
Keyword(s):  
Particle Size ◽  
Natural Zeolite ◽  
The Other ◽  
Ammonium Concentration ◽  
Small Fish ◽  
Natural Zeolites ◽  
Absorption Time ◽  
Adsorption Time ◽  
Research Results ◽  
Other Hand

ABSTRACTIndonesia has an abundant quantity of natural zeolites that have not yet been utilized maximally. On the other hand, fishpond farmers have a problem regarding the presence of ammonium in the fishpond water which will negatively impact to survival of fish, especially small fish. To solve this problem, this research was utilizing natural zeolite to degrade ammonium in the fishpond water. This research aimed to test mordenite natural zeolite from Bayah as an adsorbent to collaborate some variables impact to reach more maximal adsorption. The variables that were used to be observed were: mordenite natural zeolite from Bayah as an adsorbent which has been activated by 1-7 N H2SO4 and the other was without activation, ammonium concentration of 80-800 ppm, the particle size of adsorbent of 80 and 150 mesh, stirring speed of 600 and 800 rpm, and without stirring by duration adsorption time of 60 minutes. The research results showed that mordenite natural zeolite after activated was able to adsorb of 100% ammonium, while for the mordenite natural zeolite from Bayah without stirring was of 80%, by the same absorption time. These results will give significant benefits for fishpond farmers to increase their productivity because of the increase in fish survival.Keywords: adsorption, adsorbent, zeolite, amoniumABSTRAKKandungan zeolit alam di Indonesia cukup melimpah dan belum termanfaatkan secara maksimal. Pada sisi lain petani tambak dihadapkan pada masalah terdapatnya kandungan amonium di dalam air tambak, yang akan berdampak negatif bagi keberlangsungan hidup ikan, terutama ikan yang masih kecil. Penelitian ini mencoba memanfaatkan zeolit alam guna mendegradasi kandungan amonium dalam air tambak. Tujuan penelitian ini adalah melakukan pengujian terhadap zeolit alam mordenit dari Bayah sebagai adsorben, baik dilakukan dengan pengadukan maupun tanpa pengadukan, serta mengkolaborasi beberapa variabel yang berpengaruh agar hasil adsorpsi lebih maksimal. Observasi dilakukan dengan zeolit alam mordenit dari Bayah yang telah diaktivasi dengan 1-7 N H2SO4 maupun tanpa aktivasi, rentang konsentrasi larutan amonium 80-800 ppm, ukuran partikel adsorben 80 dan 150 mesh, kecepatan pengadukan 600 dan 800 rpm, dan tanpa pengadukan serta lamanya waktu penyerapan 60 menit. Hasil penelitian menunjukan hasil yang sangat baik, dan secara umum zeolit alam mordenit Bayah teraktivasi telah mampu melakukan adsorpsi amonium sebesar 100%, sedangkan untuk zeolit alam mordenit Bayah tanpa pengadukan sebesar 80% pada waktu adsorpsi yang sama.Kata kunci: adsorpsi, adsorben, zeolit, amonium

Sign in / Sign up

Export Citation Format

Share Document