PACKED COLUMN SIMULATION FOR CO2 CHEMISORPTION IN ACTIVATED SOLUTIONS

2020 ◽  
Vol 19 (2) ◽  
pp. 325-333
Author(s):  
Igor Cretescu ◽  
Maria Harja ◽  
Elisabeta Droniuc Hultuana ◽  
Lidia Favier ◽  
Lacramioara Rusu ◽  
...  
Keyword(s):  
Packed Column ◽  
Co2 Chemisorption

Henry's constants and mass transfer coefficients of halogenated organic pollutants in an air stripping packed column

1998 ◽  
Vol 38 (6) ◽  
pp. 287-294 ◽  
Author(s):  
Pen-C. Chiang ◽  
Chung-H. Hung ◽  
J. C. Mar ◽  
E. E. Chang
Keyword(s):  
Mass Transfer ◽  
Methylene Chloride ◽  
Packed Column ◽  
Transfer Coefficients ◽  
Chlorinated Organic Compounds ◽  
Air Stripping ◽  
Mass Transfer Coefficients ◽  
Equilibrium Partition ◽  
Henry's Constants ◽  
Chlorinated Organic

Both Henry's constants and volumetric mass transfer coefficients (KLa) of eight priority chlorinated organic compounds including 1,1-dichloroethene, methylene chloride, chloroform, carbon tetrachloride, 1,1,1-trichloroethane, trichloroethylene, tetrachloroethylene, and 1,4-dichlorobenzene in an air stripping packed column were investigated in this study. The liquid and gas phase EPICS (Equilibrium Partition in Closed System) and direct calculating methods were applied to determine the Henry's constants of VOCs. The interference of co-solute on Henry's constants was also investigated. Experimental results indicated that decrease in Henry's constants of VOCs was observed in the presence of humic acid but no apparent effect on Henry's constants was detected when there was NaCl and surfactant in solution. Four different configurations of packing media including Intalox Saddle, Super Intalox Saddle, Telleret, and Hedgehog made of polypropylene were respectively packed in the air stripping tower and investigated in the study. The dependence of hydraulic loading, air-water ratio, and configurations of packing media on mass transfer coefficients of VOCs was discussed.

A Method for Estimating Mass Transfer Coefficients in a Packed Column Using Reactive Absorption Data

2005 ◽  
Vol 70 (3) ◽  
pp. 383-402
Author(s):  
Valery A. Danilov ◽  
Il Moon
Keyword(s):  
Experimental Data ◽  
Mass Transfer ◽  
Optimization Technique ◽  
Packed Column ◽  
Effective Area ◽  
Transfer Coefficients ◽  
Mass Transfer Coefficients ◽  
Model Calculations ◽  
Unit Model ◽  
Reactive Absorption

This paper is devoted to the development of a new method for estimating mass transfer coefficients and effective area in packed columns in the case of reactive absorption. The method is based on a plug-flow model of reactive absorption of carbon dioxide with sodium hydroxide solution. The parameter estimation problem is solved using an optimization technique. Some mass transfer parameters are found to be correlated. Global sensitivity analysis by Sobol's technique showed that the unit model with the defined objective function is sensitive to the estimated parameter. Case studies of reactive absorption with different packings illustrate application of the proposed method for estimating mass transfer coefficients and effective area from column operation data. The model calculations are compared with experimental data obtained by other authors. The concentration profiles calculated by the unit model with the estimated parameters are shown to match well with experimental profiles from literature. A good agreement between estimated values and experimental data from literature confirms the applicability of this method.

Impacts of Bleaching and Packed Column Steam Refining on Cocoa Butter Properties

2007 ◽  
Vol 84 (11) ◽  
pp. 1069-1077 ◽  
Author(s):  
José Vila Ayala ◽  
Gijs Calliauw ◽  
Imogen Foubert ◽  
Koen Dewettinck ◽  
Bill Dyer ◽  
...  
Keyword(s):  
Cocoa Butter ◽  
Packed Column ◽  
Steam Refining

scholarly journals Effect of pore diameter on the elution behavior of analytes from thermoresponsive polymer grafted beads packed columns

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Kenichi Nagase ◽  
Yuta Umemoto ◽  
Hideko Kanazawa
Keyword(s):  
Pore Diameter ◽  
Packed Column ◽  
Packed Columns ◽  
Butyl Methacrylate ◽  
Thermoresponsive Polymer ◽  
Thermoresponsive Polymers ◽  
Column Temperature ◽  
Pore Sizes ◽  
Temperature Responsive ◽  
Elution Behavior

AbstractTemperature-responsive chromatography using thermoresponsive polymers is innovative and can control analyte retention via column temperature. Analyte elution behavior in this type of chromatography depends on the modified thermoresponsive polymer and the structure of the base materials. In the present study, we examine the effect of the pore diameter of silica beads on analyte elution behavior in temperature-responsive chromatography. Poly(N-isopropylacrylamide-co-n-butyl methacrylate) hydrogel was applied to beads of various pore sizes: 7, 12, and 30 nm. Almost the same amount of copolymer hydrogel was applied to all beads, indicating that the efficiency of copolymer modification was independent of pore size. Analyte retention on prepared beads in a packed column was observed using steroids, benzodiazepines, and barbiturates as analytes. Analyte retention times increased with temperature on packed columns of 12- and 30-nm beads, whereas the column packed with 7-nm beads exhibited decreased retention times with increasing temperature. The difference in analyte elution behavior among the various pore sizes was attributed to analyte diffusion into the bead pores. These results demonstrate that bead pore diameter determines temperature-dependent elution behavior.

Sign in / Sign up

Export Citation Format

Share Document