scholarly journals PENGATURAN PORTAL PADA PENGURUTAN PARKIR MOBIL DENGAN MENGGUNAKAN RFId DAN PC

2009 ◽  
Vol 1 (2) ◽  
pp. 61-72
Author(s):  
Roza Susanti ◽  
Budhi Bakhtiar
Keyword(s):  
Personal Computer ◽  
Radio Frequency Identification ◽  
Visual Basic ◽  
Main Function ◽  
Serial Port ◽  
Rfid Tag ◽  
Car Park ◽  
Frequency Identification ◽  
Visual Basic 6.0 ◽  
Day By Day

The number of vehicles increasing day by day. It will trigger the demand of parking area, especially for car park. To overcome this problem, we offer a solution, by creating a miniatur car parking. This Car park  only for members whose can park their car in it. Each car will be equiped by a RFId tag (RFid card) and the RFId sensor (Radio Frequency Identification) which will detecting this card . The main function of the RFid card is to detecting every car come and go from the car parking area. The data are readed from the card need to be checked and verified with the database of  member identification (Id) by using Visual Basic 6.0 as the interface. The serial port RS 232 used as the interface to connect  RFId sensor and Personal computer. The program in AT89S51 microcontroller will control the motor rotation for opening or closing the parking area gate.

scholarly journals Design of an Electronic Student Identification System Using RFID

2019 ◽  
Vol 4 (5) ◽  
pp. 45-49
Author(s):  
Farouq Eneuma Shaibu ◽  
Tashiwa Emmanuel Ibrahim ◽  
Felix Ale
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Visual Basic ◽  
Identification System ◽  
Student Attendance ◽  
Registration Number ◽  
Frequency Identification ◽  
Student Identification ◽  
Visual Basic 6.0

This project is based on designing of student identification system using RFID i.e. Radio Frequency Identification which is to fulfill broad range of purposes, least being an electronic student identification system focuses on academic and monitoring purposes, more also to address the problem when using the paper as student attendance such as cheating. The work provided the alternative way of interfacing a tag and a reader to get code of student’s card (tag) to compare with the database in Access, which is developed using Visual Basic 6.0 to make the database easier to access. When a student swipes his card on the reader, his information like student’s name, registration number, level, sex, and date of birth will show on interface if the code matched with database.

scholarly journals SISTEM ABSENSI KARYAWAN RSUD KARDINAH DENGAN MENGGUNAKAN RFID

TEMATIK ◽  
2018 ◽  
Vol 5 (1) ◽  
pp. 88-96
Author(s):  
Dedy Setyawan
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Visual Basic ◽  
Frequency Identification ◽  
Visual Basic 6.0

Fakta bahwa masih banyak perusahaan BUMN / BUMS masih menggunakan pencatatan kehadiran karyawan masih menggunakan manual yaitu masih menggunakan buku pencatat daftar kehadiran karyawan.pada saat masuk maupun pulang / selesai kerja. Penelitian ini bertujuan untuk membuat Rancang Bangun Perangkat Sistem Absensi Karyawan Rsud Kardinah Dengan Menggunakan RFID (Radio Frequency Identification)  Berbasis Visual Basic 6.0. Sistem informasi ini memberikan kemudahan dalam melakukan absensi dan proses pengelolaan data presensi. Pengelolaan data lebih terorganisir sehingga proses penyimpanan data dan manajemen file dapat memenuhi syarat administrasi. Teknologi Radio Frrequency Identification (RFID) merupakan sebuah teknologi pengidentifikasian suatu objek dengan memanfaatkan frekuensi radio. Kelebihan yang dimiliki teknologi ini dengan teknologi identifikasi lainnya menjadi daya tarik bagi para pengembang teknologi untuk lebih memanfaatkannya. Berdasarkan hasil pengujian, sistem ini telah dapat membaca data ID melalui koneksi serial RS232 pada komputer client dan mencocokan data ID tersebut dengan Database pada komputer server yang berisi data Karyawan kemudian menampilkanya pada komputer client sebagai media informasi

scholarly journals On the application of the EM-imaging for chipless RFID tags

2015 ◽  
Vol 2 (2) ◽  
pp. 86-96 ◽  
Author(s):  
M. Zomorrodi ◽  
N.C. Karmakar
Keyword(s):  
Radio Frequency Identification ◽  
Low Cost ◽  
60 Ghz ◽  
Rfid Tag ◽  
High Data ◽  
Data Encoding ◽  
Bending Effect ◽  
Chipless Rfid ◽  
Frequency Identification ◽  
Cost Item

The electromagnetic (EM) imaging technique at mm-band 60 GHz is proposed for data encoding purpose in the chipless Radio Frequency Identification (RFID) systems. The fully printable chipless RFID tag comprises tiny conductive EM polarizers to create high cross-polar radar cross-section. Synthetic aperture radar approach is applied for formation of the tag's EM-image and revealing the tag's content. The achieved high data encoding capacity of 2 bits/cm2in this technique based on a fully printable tag is very convincing for many applications. The system immunity to multipath interference, bending effect, and printing inaccuracy suggests huge potentials for low-cost item tagging. Tags are also readable through a tick paper envelop; hence secure identification is provided by the proposed technique.

A low-profile FSS-based high capacity chipless RFID tag for sensing and encoding applications

2021 ◽  
pp. 1-9
Author(s):  
Shahid Habib ◽  
Amjad Ali ◽  
Ghaffer Iqbal Kiani ◽  
Wagma Ayub ◽  
Syed Muzahir Abbas ◽  
...  
Keyword(s):  
Radio Frequency Identification ◽  
High Capacity ◽  
Frequency Selective Surface ◽  
Rfid Tag ◽  
Sensing Applications ◽  
Low Profile ◽  
Simple Geometry ◽  
Chipless Rfid ◽  
Frequency Identification ◽  
Good Agreement

Abstract This paper presents a polarization-independent 11-bit chipless RFID tag based on frequency-selective surface which has been designed for encoding and relative humidity (RH) sensing applications. The 10 exterior U-shaped resonators are used for item encoding whereas Kapton has been incorporated with the interior resonator for RH sensing. This radio-frequency identification (RFID) tag operates in S- and C-frequency bands. The proposed design offers enhanced fractional bandwidth up to 88% with the density of 4.46 bits/cm2. Both single- and dual-layer tags have been investigated. The simulated results are in good agreement with measured results and a comparison with existing literature is presented to show the performance. Simple geometry, high code density, large frequency signature bandwidth, high magnitude bit, high radar cross-section, and angular stability for more than 75° are the unique outcomes of the proposed design. In addition, RH sensing has been achieved by integrating the Kapton on the same RFID tag.

scholarly journals Rancang Bangun Sistem Pengaman Sepeda Motor Menggunakan Radio Frequency Identification (RFID) dan Notifikasi Melalui Handphone

2019 ◽  
Vol 8 (1) ◽  
pp. 13-19
Author(s):  
Meli Mildawati ◽  
Wildian Wildian
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Reed Switch ◽  
Rfid Tag ◽  
Rfid Reader ◽  
Frequency Identification ◽  
Arduino Uno

Sistem pengaman sepeda motor menggunakan radio frequency identification (RFID) dan notifikasi melalui handphone yang dikontrol dengan modul Arduino Uno telah dirancang bangun. RFID terdiri dari sebuah RFID tag dan RFID reader. RFID tag yang memiliki kode yang berbeda-beda, digunakan sebagai kunci untuk menghidupkan sepeda motor setelah kunci kontak digunakan. RFID reader dapat membaca tag pada jarak maksimal 1,26 cm. Sepeda motor yang dihidupkan tanpa menggunakan RFID tag atau RFID tag tidak sesuai menyebabkan aktifnya reed switch pada pelek roda depan. Ketika roda telah berputar sebanyak empat kali, maka alarm aktif dan GSM SIM 800L mengirimkan notifikasi berupa SMS sebanyak satu kali dan misscall sebanyak tiga kali ke nomor handphone pemilik sepeda motor. Waktu delay rata-rata SMS dan miscall berturut-turut adalah 5,42 s, 8,62 s, 61,14 s dan 113,16 s. Kata kunci: sistem pengaman sepeda motor, RFID, Arduino Uno , reed switch, GSM SIM 800L

scholarly journals Advanced Footstep Power Generation using RFID for Charging

2021 ◽  
Vol 9 (12) ◽  
pp. 969-980
Author(s):  
Priyanka Naresh Chandra Dayal
Keyword(s):  
Power Generation ◽  
Radio Frequency ◽  
Mobile Phone ◽  
Mobile Phones ◽  
Radio Frequency Identification ◽  
Piezoelectric Sensors ◽  
Charging Time ◽  
Time Period ◽  
Frequency Identification ◽  
Day By Day

Abstract: Day by day, the population of the country is increasing and the requirement of the power is also increasing in many ways. So, reforming this energy back to usable form is the major solution for future needs. In this Footstep power generation project, power is generated by human’s footsteps, so as to charge the battery by storing the power generated with the help of piezo sensors. The power stored in the battery, used to charge the mobile phones using RFID card. This system is powered by Atmega 328 microcontroller, it consists of Arduino IDE, RFID Sensor, USB Cable and LCD. When power is on in the system, the system enters into the registration mode. Three users can registered. Once all the users entered in the system, then the system asks to swipe the card and connect the charger. Initially all the user is given 5 minutes of charging time as default. When card is swiped and the user is authorized, the system turns on for charging the Mobile phone within a given time period. Keywords: Arduino Uno, Arduino IDE, Piezoelectric Sensors, RFID (Radio Frequency Identification ), LCD

Adaptive Framework for Collisions in RFID Tag Identification

2008 ◽  
Vol 07 (01) ◽  
pp. 9-14 ◽  
Author(s):  
Selwyn Piramuthu
Keyword(s):  
Supply Chain ◽  
Radio Frequency Identification ◽  
Rfid Tags ◽  
Tag Identification ◽  
Seamless Integration ◽  
Essential Information ◽  
Rfid Tag ◽  
Frequency Identification ◽  
Pass Through ◽  
Aloha Protocol

Radio Frequency Identification (RFID) is promising, as a technique, to enable tracking of essential information about objects as they pass through supply chains. Information thus tracked can be utilised to efficiently operate the supply chain. Effective management of the supply chain translates to huge competitive advantage for the firms involved. Among several issues that impede seamless integration of RFID tags in a supply chain, one of the problems encountered while reading RFID tags is that of collision, which occurs when multiple tags transmit data to the same receiver slot. Data loss due to collision necessitates re-transmission of lost data. We consider this problem when Framed Slotted ALOHA protocol is used. Using machine learning, we adaptively configure the number of slots per frame to reduce the number of collisions while improving throughput.

The Use of Embedded Mobile, RFID, Location Based Services, and Augmented Reality in Mobile Applications

2017 ◽  
Vol 8 (1) ◽  
pp. 42-52 ◽  
Author(s):  
Greg Gogolin ◽  
Erin Gogolin
Keyword(s):  
Augmented Reality ◽  
Mobile Device ◽  
Radio Frequency Identification ◽  
Mobile Applications ◽  
Near Field ◽  
Location Based Services ◽  
Payment Systems ◽  
Rfid Tag ◽  
Frequency Identification ◽  
Mobile Rfid

The proliferation of mobile devices such as smart phones and other handheld appliances has stimulated the development of a broad range of functionality, including medical, retail, gaming, and personal applications. Technology that has been leveraged to enable many of these uses includes embedded mobile, radio frequency identification, location based services, and augmented reality. Embedded mobile refers to preprogrammed tasks that are performed on a mobile device. Personal care and monitoring is one of the most common uses of embedded mobile. RFID involves communication between a tag and a reader. Mobile RFID extends the technology by tagging the mobile device with an RFID tag to perform tasks on the device. Near field communication is frequently utilized in mobile payment systems. Advertisers find this of significant use in focusing advertisements based on the location of an individual. Augmented reality involves the use of computer generated or enhanced sensory input such as audio and visual components to enhance the perception of reality.

scholarly journals Longest-Range UHF RFID Sensor Tag Antenna for IoT Applied for Metal and Non-Metal Objects

Sensors ◽  
2019 ◽  
Vol 19 (24) ◽  
pp. 5460 ◽  
Author(s):  
Franck Kimetya Byondi ◽  
Youchung Chung
Keyword(s):  
Wireless Sensor Networks ◽  
Radio Frequency Identification ◽  
High Frequency ◽  
Wireless Sensor ◽  
The Internet ◽  
Uhf Rfid ◽  
Rfid Tag ◽  
Frequency Identification ◽  
The Internet Of Things ◽  
Read Range

This paper presents a passive cavity type Ultra High Frequency (UHF) Radio Frequency Identification (RFID) tag antenna having the longest read-range, and compares it with existing long-range UHF RFID tag antenna. The study also demonstrates mathematically and experimentally that our proposed longest-range UHF RFID cavity type tag antenna has a longer read-range than existing passive tag antennas. Our tag antenna was designed with 140 × 60 × 10 mm3 size, and reached 26 m measured read-range and 36.3 m mathematically calculated read-range. This UHF tag antenna can be applied to metal and non-metal objects. By adding a further sensing capability, it can have a great benefit for the Internet of Things (IoT) and wireless sensor networks (WSN).

Sign in / Sign up

Export Citation Format

Share Document