scholarly journals Review on research and development of heat resistant Magnesium alloy

2012 ◽  
Author(s):  
Fu Sanling ◽  
Li Quanan ◽  
Jing Xiaotian ◽  
Zhang Qing ◽  
Chen Zhi ◽  
...  
Keyword(s):  
Magnesium Alloy ◽  
Research And Development ◽  
Heat Resistant

Newly Developed Heat Resistant Magnesium Alloy by Thixomolding®

2005 ◽  
Vol 488-489 ◽  
pp. 287-290 ◽  
Author(s):  
Tadayoshi Tsukeda ◽  
Ken Saito ◽  
Mayumi Suzuki ◽  
Junichi Koike ◽  
Kouichi Maruyama
Keyword(s):  
Aluminum Alloy ◽  
Magnesium Alloy ◽  
Magnesium Alloys ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Die Casting ◽  
The Other ◽  
Heat Resistant ◽  
Higher Temperature ◽  
Better Than

We compared the newly developed heat resistant magnesium alloy with conventional ones by Thixomolding® and aluminum alloy by die casting. Tensile properties at elevated temperatures of AXEJ6310 were equal to those of ADC12. In particular, elongation tendency of AXEJ6310 at higher temperature was better than those of the other alloys. Creep resistance of AXEJ6310 was larger than that of AE42 by almost 3 orders and smaller than that of ADC12 by almost 2 orders of magnitude. Fatigue limits at room temperature and 423K of AXEJ6310 was superior among conventional magnesium alloys.

Newly Developed Heat Resistant Magnesium Alloy by Thixomolding

2003 ◽  
Vol 419-422 ◽  
pp. 439-444 ◽  
Author(s):  
R. Uchida ◽  
Tadayoshi Tsukeda ◽  
Mayumi Suzuki ◽  
Junichi Koike ◽  
Kouichi Maruyama
Keyword(s):  
Magnesium Alloy ◽  
Heat Resistant

Study of Residual Stresses in Welded Joints of Heat-Resistant ML10 Magnesium Alloy After Electrodynamic Treatment

2014 ◽  
Vol 46 (6) ◽  
pp. 746-752 ◽  
Author(s):  
L. M. Lobanov ◽  
N. A. Pashchin ◽  
V. V. Savitskii ◽  
O. L. Mikhodui
Keyword(s):  
Magnesium Alloy ◽  
Residual Stresses ◽  
Welded Joints ◽  
Heat Resistant ◽  
Electrodynamic Treatment

408 Evaluation and improvement of wettability between heat-resistant magnesium alloy and graphite

2016 ◽  
Vol 2016.54 (0) ◽  
pp. _408-1_-_408-2_
Author(s):  
Gen SASAKI ◽  
Youqiang YAO ◽  
Ruidong FU ◽  
Kenjiro SUGIO
Keyword(s):  
Magnesium Alloy ◽  
Heat Resistant

Influence of Processing Route on the Properties of Magnesium Alloys

2008 ◽  
Vol 141-143 ◽  
pp. 43-48 ◽  
Author(s):  
Frank Hagen ◽  
Norbert Hort ◽  
Hajo Dieringa ◽  
Karl Ulrich Kainer
Keyword(s):  
Magnesium Alloy ◽  
Magnesium Alloys ◽  
Elevated Temperatures ◽  
Processing Route ◽  
Chemical Compositions ◽  
Alloy Development ◽  
Heat Resistant ◽  
Eu Directive ◽  
Property Profile ◽  
The Eu

Magnesium alloys had gained an increasing interest in recent years due to their promising property profile for light weight constructions. They offer drastic advantages in weight reductions in automotive industries compared to steel or even aluminium. Therefore they can be used to decrease the emission of green house gases as requested by the EU directive for the reduction of CO2 emissions and moreover due to their recyclability they also help to fulfill the requirements from the EU directive regarding the end of life of vehicles. But still there are some limitations with regard to strength, mostly at elevated temperatures above 130 °C. To overcome these limitations alloy development as well as process optimization has to be done for further enhancement of the range of magnesium applications. This paper will show and discuss the property profiles of the standard magnesium alloy AZ91D compared to the recently developed, heat resistant magnesium alloy MRI153. The alloys have been processed using normal high pressure die casting (HPDC), New Rheocasting (NRC) and Thixomolding® (TM). As methods of investigation tensile and creep tests have been applied. The creep properties have been determined in the temperature range of 135-150 °C and loads of 50-85 MPa. All these trials have been accompanied by metallographic observations (light optical metallography, SEM) and density measurements to investigate the influence of the processing routes on microstructure and the porosity of the materials. It will be shown that the differences in the property profile of the chosen alloys are dependent on their different chemical compositions as well as on different microstructures that are obtained by the different processing routes. While in the case of AZ91D, TM is showing advantages compared to HPDC for room temperature applications, the NRC in combination with the heat resistant alloy leads to an improvement of creep rates by two orders of magnitudes.

Development of Lightweight Oil Pans Made of a Heat-Resistant Magnesium Alloy for Hybrid Engines

2000 ◽  
Author(s):  
S. Koike ◽  
K. Washizu ◽  
S. Tanaka ◽  
T. Baba ◽  
K. Kikawa
Keyword(s):  
Magnesium Alloy ◽  
Heat Resistant ◽  
Hybrid Engines
Sign in / Sign up

Export Citation Format

Share Document