scholarly journals Experimental Study on the Mechanical Behavior of High Water Content Dredged Materials Stabilized by Cement and Super-absorb Polymer

2016 ◽  
Author(s):  
Xia Bian ◽  
Zhifeng Wang
Keyword(s):  
Experimental Study ◽  
Mechanical Behavior ◽  
Water Content ◽  
High Water ◽  
High Water Content ◽  
Dredged Materials

Experimental Study on the Improvement of High Water Content Dredged Material by Cement and by Quicklime

2014 ◽  
Vol 878 ◽  
pp. 714-719 ◽  
Author(s):  
Ying Hao Huang ◽  
Chan Dong ◽  
Xiao Lei Zhan ◽  
Yun Fei Guan
Keyword(s):  
Water Content ◽  
High Water ◽  
High Water Content ◽  
Dry Density ◽  
Dredged Material ◽  
Test Results ◽  
Environmental Friendly ◽  
Dredged Materials ◽  
Beneficial Uses ◽  
Modified Soil

Dredging is necessary to keep rivers, harbors and lakes function normally. These dredged materials (DM) have poor geotechnical properties and are normally treated as wastes. Thus, utilization of DM for beneficial uses such as fill is being considered as an environmental-friendly and economical option. In this study a dredged material taken from Tai-hu Lake was modified by adding quicklime and by Portland cement. Water content, dry density, plasticity, and California bearing ratio (CBR) of the two types of modified soil were determined and compared. Test results show that both quicklime and cement can evidently decrease the water content and increase dry density, but the former can get better effect relatively. On the other hand, both quicklime and cement can significantly decrease the plasticity characteristics, and change the raw DM classified as CH to MH after modified, moreover, the cement has better effect on the improvement of plasticity. For the same additive content and curing days, the cement modified soil has larger CBR strength than that of the quicklime modified soil. Conclusions of the paper maybe beneficial and useful for the solidification material choose, and for practical dredged material solidification projects.

Hydrogels as Antibacterial Biomaterials

2018 ◽  
Vol 24 (8) ◽  
pp. 843-854 ◽  
Author(s):  
Weiguo Xu ◽  
Shujun Dong ◽  
Yuping Han ◽  
Shuqiang Li ◽  
Yang Liu
Keyword(s):  
Mechanical Properties ◽  
Drug Delivery ◽  
Tissue Engineering ◽  
Water Content ◽  
Oxygen Permeability ◽  
Structural Diversity ◽  
High Water ◽  
Clinical Applications ◽  
High Water Content ◽  
Biomedical Field

Hydrogels, as a class of materials for tissue engineering and drug delivery, have high water content and solid-like mechanical properties. Currently, hydrogels with an antibacterial function are a research hotspot in biomedical field. Many advanced antibacterial hydrogels have been developed, each possessing unique qualities, namely high water swellability, high oxygen permeability, improved biocompatibility, ease of loading and releasing drugs and structural diversity. In this article, an overview is provided on the preparation and applications of various antibacterial hydrogels. Furthermore, the prospects in biomedical researches and clinical applications are predicted.

Microwave-Induced Thermoacoustic Imaging for Embedded Explosives Detection in High-Water Content Medium

2019 ◽  
Vol 67 (7) ◽  
pp. 4803-4810 ◽  
Author(s):  
Xiong Wang ◽  
Tao Qin ◽  
Yexian Qin ◽  
Ahmed H. Abdelrahman ◽  
Russell S. Witte ◽  
...  
Keyword(s):  
Water Content ◽  
High Water ◽  
Explosives Detection ◽  
High Water Content ◽  
Thermoacoustic Imaging

scholarly journals Deep mantle melting, global water circulation and its implications for the stability of the ocean mass

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Shun-ichiro Karato ◽  
Bijaya Karki ◽  
Jeffrey Park
Keyword(s):  
Phase Transformation ◽  
Water Content ◽  
Sea Level ◽  
High Water ◽  
Water Circulation ◽  
Mantle Melting ◽  
High Water Content ◽  
Mineral Physics ◽  
Deep Mantle ◽  
Global Water

AbstractOceans on Earth are present as a result of dynamic equilibrium between degassing and regassing through the interaction with Earth’s interior. We review mineral physics, geophysical, and geochemical studies related to the global water circulation and conclude that the water content has a peak in the mantle transition zone (MTZ) with a value of 0.1–1 wt% (with large regional variations). When water-rich MTZ materials are transported out of the MTZ, partial melting occurs. Vertical direction of melt migration is determined by the density contrast between the melts and coexisting minerals. Because a density change associated with a phase transformation occurs sharply for a solid but more gradually for a melt, melts formed above the phase transformation depth are generally heavier than solids, whereas melts formed below the transformation depth are lighter than solids. Consequently, hydrous melts formed either above or below the MTZ return to the MTZ, maintaining its high water content. However, the MTZ water content cannot increase without limit. The melt-solid density contrast above the 410 km depends on the temperature. In cooler regions, melting will occur only in the presence of very water-rich materials. Melts produced in these regions have high water content and hence can be buoyant above the 410 km, removing water from the MTZ. Consequently, cooler regions of melting act as a water valve to maintain the water content of the MTZ near its threshold level (~ 0.1–1.0 wt%). Mass-balance considerations explain the observed near-constant sea-level despite large fluctuations over Earth history. Observations suggesting deep-mantle melting are reviewed including the presence of low-velocity anomalies just above and below the MTZ and geochemical evidence for hydrous melts formed in the MTZ. However, the interpretation of long-term sea-level change and the role of deep mantle melting in the global water circulation are non-unique and alternative models are reviewed. Possible future directions of studies on the global water circulation are proposed including geodynamic modeling, mineral physics and observational studies, and studies integrating results from different disciplines.

scholarly journals Torrefaction of Woody and Agricultural Biomass: Influence of the Presence of Water Vapor in the Gaseous Atmosphere

Processes ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 30
Author(s):  
María González Martínez ◽  
Estéban Hélias ◽  
Gilles Ratel ◽  
Sébastien Thiéry ◽  
Thierry Melkior
Keyword(s):  
Water Vapor ◽  
Water Content ◽  
Wheat Straw ◽  
Beech Wood ◽  
High Water ◽  
High Water Content ◽  
Biomass Degradation ◽  
Moist Atmosphere ◽  
Thermochemical Transformation ◽  
Degradation Reactions

Biomass preheating in torrefaction at an industrial scale is possible through a direct contact with the hot gases released. However, their high water-content implies introducing moisture (around 20% v/v) in the torrefaction atmosphere, which may impact biomass thermochemical transformation. In this work, this situation was investigated for wheat straw, beech wood and pine forest residue in torrefaction in two complementary experimental devices. Firstly, experiments in chemical regime carried out in a thermogravimetric analyzer (TGA) showed that biomass degradation started from lower temperatures and was faster under a moist atmosphere (20% v/v water content) for all biomass samples. This suggests that moisture might promote biomass components’ degradation reactions from lower temperatures than those observed under a dry atmosphere. Furthermore, biomass inorganic composition might play a role in the extent of biomass degradation in torrefaction in the presence of moisture. Secondly, torrefaction experiments on a lab-scale device made possible to assess the influence of temperature and residence time under dry and 100% moist atmosphere. In this case, the difference in solid mass loss between dry and moist torrefaction was only significant for wheat straw. Globally, an effect of water vapor on biomass transformation through torrefaction was observed (maximum 10%db), which appeared to be dependent on the biomass type and composition.

Study on Corrosion of X80 Pipeline Steel in Different Water Content of Soil

2014 ◽  
Vol 1015 ◽  
pp. 655-658
Author(s):  
Shu Zhen Yu ◽  
Guang Jun Xu ◽  
Han Hua Song ◽  
Xun Zhu ◽  
Wen We Lu ◽  
...  
Keyword(s):  
Water Content ◽  
High Frequency ◽  
Pipeline Steel ◽  
Electrochemical Corrosion ◽  
High Water ◽  
High Water Content ◽  
Linear Segment ◽  
X80 Pipeline Steel ◽  
The Third ◽  
In The Beginning

The electrochemical corrosion of X80 pipeline steel in Xinzhou’s soil with different water content is tested and analyzed. The corrosion signal time and frequency domain figure show that the corrosion signal fluctuates all the time in 30 days’ test with low water content (14%). The slope of high-frequency linear segment in the potential PSD is smaller than it is at the beginning. In the soil with the middle water content (18%), the intense wave motion lasts for 15 days. The noise fluctuation only exists before the third days when in the high water content soil (22%). After the third day, linear drift can be observed but no transient peak. The slope of high-frequency linear segment changes obviously compared with the situation in the beginning. And the high-frequency white noise appears.

Sign in / Sign up

Export Citation Format

Share Document